EVOLVEO AudioConverter XS Bruksanvisning

EVOLVEO Inte kategoriserad AudioConverter XS

Läs nedan 📖 manual på svenska för EVOLVEO AudioConverter XS (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
- 8 -
Indicator Status
RX
TX
In receiving mode
Device 1 successfully paired
Device 2 successfully paired
Bypass mode
Flashes Blue and Red alternately to indicate is in pairing modedevice
Flashes Blue and Red alternately to indicate is in pairing modedevice
In transmitting mode
- 15 -
8. Pair and Connect two Devices Simultaneously
In TX mode
1)
Pair with the first device by following the previous instructions in the “Use as
a Transmitter (TX mode)” section.
2) Pair with the second device
Set second headphones/speaker to pairing mode.
button for 3s until the TX LED Set to pairing mode again, press t device
flashes Blue and Red.
Wait until connected.
Notes:
For improved compatibility and sound quality, we suggest that you use
Bluetooth devices with CSR chipset.
- 3 -
To take advantage of the better performance of the apeX Low Latency Codec,
the other side device must support the same codec. If the other side device
only supports the normal aptX codec, or the SBC one, those codecs will be
used instead.
Audio delay when paired with different headphones/receiver-
Headphones/receiver support - The audio delay will be
aptX Low Latency codec
aptX codec
SBC codec (most standard Bluetooth audio)
~ 40ms
~ 70ms
~ 220ms
- 2 -
BT version: 5.0
Supports profiles: A2DP, AVRCP
Audio codec: SBC, aptX, aptX-LL, aptX-HD
Operational range:
indoors: up to 50-70ft (without obstacles)
outdoors: up to 197ft (without obstacles)
Input voltage/ current: Micro USB DC5.0V 500mA
Operating temperature:-10°C ~ 45°C
Storage temperature: -20°C ~ 60°C
Support sampling rate in optical mode: ≤48KHz
Product size: 126×94×29mm
Product weight: 124g
1. Product Specifications
EVOLVEO AudioConverter XS is a wireless long range audio transmitter &
receiver incorporating the latest
“aptX low-latency” technology for CD-like
quality sound with virtually no delay.
Multifunctional, supporting optical and
bypass. Providing the best solution to
enable your TV or home audio system
to wirelessly stream hi-fi audio directly to
any wireless headphones or speakers.
- 7 -
4. LED indications
- 6 -
Button Function Operation
Power switch Slide to “ON” to turn on the device.Power on
Enter paring mode
Play / Pause
In AUX audio mode, short press once
(TX mode doesn’t support).
Volume down/
Previous song
In AUX audio mode, short press once.
(TX mode doesn’t support).
Slide to RX to enter receiving mode.
Mode switch
Receiver mode
Transmitter mode
Slide to TX to enter transmitting mode.
Short press once.Reconnect
Bypass mode Slide to “Bypass” to enter Bypass
mode.
Short press this button once to play/
pause music, (TX mode doesn’t
support).
Hold this button for about 3 seconds.
Volume up/
Next song
- 5 -
3. Product Overview & Control Functions
- 11 -
6. Use as a Receiver (RX mode) Installation diagram
- 12 -
- 14 -
1)
Connect your speaker to "To Speaker" port with the audioAudioConverter XS
cable provided
(optical or AUX/RCA).
2) AudioConverter XSConnect to a power source with USB cable and adapter.
3) Slide Power switch to the "ON" position.
4) Slide Mode switch to the "RX" position.
5) AudioConverter XSPairing - Pair with your Bluetooth-enabled phone/PC/
tablet.
Set into pairing mode, RX LED flash Blue / RedAudioConverter XS
alternately fast.
First-time use: will auto enter pairing mode (with clearAudioConverter XS
memory).
– Afterward: press button for 3 seconds to enter.
Active Bluetooth on your phone or another device to find ” toEVO-XS
connect.
Wait and connected (For quick pairing, better keep them within 1 meter
when pairing).
● NFC enabled phones can connect this device easily with Near Field
Communication (NFC) function.
Bypassing means using as a non-Bluetooth device which AudioConverter XS
connects the TV
and speaker via wires directly. This design enables you to
switch between wired
(Bypass mode) and wireless (Bluetooth mode) with just
one switch without the
need to disconnect any cables.
1)
2)
Connect audio source (TV, DVD etc.) to “From TV" AudioConverter XS
port with the audio
cables provided (optical or AUX/ RCA).
Connect your speaker to "To Speaker" port with your AudioConverter XS
own audio cable
(optical or AUX/RCA).
3) Connect
AudioConverter XS
to a power source with USB
cable and adapter.
4) Slide Power switch to the "ON" position.
5) Slide the Mode switch to the "Bypass" position.
6) Ready for use.
7. Bypass mode (Non-Bluetooth) Installation diagram
- 16 -
- 18 -- 17 - - 19 -
In RX mode
1) Pair with the first device by following the previous instructions in the “Use as
a Receiver (RX mode)” section.
2) Pair with the second device
Set to pairing mode again, pressdevice button for 3s until the RX LED
flashes Blue and Red.
Active Bluetooth on the second device to find ” to connect.EVO-XS
Wait until connected.
Note: Only one device can play music at any time. You must stop the music
on one device to play on the other.
9. Restore Factory Default Settings
You may need to reset if it is not working as expected. When is device device
reset to factory default settings, all the paired device information will be cleared.
Press and hold the buttons 5s until the RX/TX LED flashes Blue and Red.
10. Troubleshooting
1) I am having trouble pairing and connecting to my Bluetooth device.
Please check the following:
1.
Your wireless device supports the wireless profiles listed in the specifications.
2.
B03 and your device are next to each other or within 3 feet / 1 meter.
3. Make sure both
AudioConverter XS
and the wireless device are in pairing
mode.
2)
After connecting and pairing with my wireless device, I cannot hear any music
from my sound system.
1. Make sure to remove the protective head on optical cable.
2.
In Optical mode, AudioConverter XS support device with sampling rate under
48kHz.
Note: Need to make sure TV audio format is set to PCM(Fig17-1) and TV sound
out as “External Speakers”(Fig 17-2)
- 10 -- 9 -
5. Use as a transmitter (TX mode) Installation diagram
1)
Connect audio source (TV, DVD etc.) to "From TV" portAudioConverter XS
with the audio
cables provided (optical or AUX/RCA).
2)
Connect to a power source (TV, PC USB socket orAudioConverter XS
power adapter) with
a USB cable.
3) Slide Power switch to the "ON" position.
4) Slide Mode switch to the "TX" position.
5) AudioConverter XSPairing - Pair with your Bluetooth-enabled headsets/
speakers.
Set into pairing mode, TX LED flash Blue / RedAudioConverter XS
alternately fast.
First-time use: will auto enter pairing mode (with clearAudioConverter XS
memory).
– Afterward: press button for 3 seconds.
• Set your headsets/speakers to pairing mode refer to its user manual.
• Wait until connected (For quick pairing, better keep them within 1 meter
when pairing)
- 4 -
2. Package Contents:
A. EVOLVEO AudioConverter XS
B. Power adapter(optional)
C. 5V power cable
D. Optical cable
E. 3.5mm audio cable
F.
3.5mm female to RCA male cable
G. User manual
H. Quick user guide
- 1 -
Contents
2
16
18
18
16
15
13
11
9
7
4
5
1. Product Specifications
2. Package Contents
3. Product Overview & Control Functions
4. LED indications
5. Use as a transmitter (TX mode) Installation diagram
6. Use as a Receiver (RX mode) Installation diagram
7. Bypass mode (Non-Bluetooth) Installation diagram
8. Pair and Connect two Devices Simultaneously
9. Restore Factory Default Settings
10. Troubleshooting
11. Warnnings
12. FCC Notice
Power switchMode switch
AudioConverter XS Back
TV optical
output
TV AUX Output
5V Power Cable
5V Power Cable
5V Power Cable
TV
TV RCA Output
Option A
AUX cable
Option B
AUX + RCA cable
Option C
Optical cable
Speaker
AUDIO
IN
AUDIO
IN
TV
Speaker
Slide to “OFF” to turn off the device.Power off
Bypass
Model: B03
Artis an3 Plus
Us er Guid e
Hello
- 13 -
Speaker optical
input
Speaker AUX inputSpeaker RCA input
AudioConverter XS Back
Option A
AUX cable
Option B
AUX + RCA cable
Option C
Optical cable
AudioConverter XS Back
TV optical
output
TV AUX Output TV RCA Output
Option A
AUX cable
Option B
AUX + RCA cable
Option C
Optical cable
Speaker optical
input
Speaker AUX inputSpeaker RCA input
Option A
AUX cable
Option B
AUX + RCA cable
Option C
Optical cable
11. Warnnings
Warranty service is limited to normal use. Any man-made damages such as from
connecting to an unsuitable power source, using an unsuitable device, or not
following the instructions, as well as damages that did not occur during
shipping,
repairs and adjustments not approved by the company, damages
from misuse,
inattention, or improper installation may cause the warranty to
be ineffective
immediately. This warranty does not include shipping fees.
Disposal: The symbol of crossed out container on the product, in the
literature or on the wrapping means that in the European Union all the electric
and electronic products, batteries and accumulators must be placed into the
separate salvage after finishing their lifetime. Do not throw these products into
the unsorted municipal waste
DECLARATION OF CONFORMITY
Hereby, the company Abacus Electric, s.r.o. declares that the EVOLVEO
AudioConverter XS is in compliance with the requirements of the standards and
regulations, relevant for the given type of device.
Find the complete text of Declaration of Conformity at ftp://ftp.evolveo.com/ce
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.
Design and specification may be changed without prior notice.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- 20 -
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2:
Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
Fig17-1 Set your TV Audio
Format to “PCM”(IMPORTANT)
Fig17-2 Set your TV Speaker
to “External Speaker”
PCM
Dolby Digital
DTS
DTS Neo 2:5
Settings
Audio Format
Speakers
Internal speakers
External speakers
Headset
B03
Quick User Guide
www.1mii.com
Global customer services:
Europe:
E-mail: support-uk@1mii.com (UK )
support-de@1mii.com (DE)
support-fr@1mii.com (FR)
support-es@1mii.com (ES)
support-it@1mii.com (IT)
Asia:
E-mail: support-jp@1mii.com (JP )
North America:
E-mail: support@1mii.com (US )
support-ca@1mii.com (CA)
AudioConverter XS
www.evolveo.com
1 .2FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

Produktspecifikationer

Varumärke: EVOLVEO
Kategori: Inte kategoriserad
Modell: AudioConverter XS

Behöver du hjälp?

Om du behöver hjälp med EVOLVEO AudioConverter XS ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad EVOLVEO Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer