Extech AN500 Bruksanvisning

Läs nedan 📖 manual på svenska för Extech AN500 (8 sidor) i kategorin Mätutrustning. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
U SER MANUAL
Hot Wire CFM/CMM Thermo- Anemometer
Model AN500
Additional User Manual Translations available at www.extech.com
AN500-en-GB_v2.1 5/17
2
Introduction
Thank you for selecting the Exte Hot Wire CFM/CMM Thermo-Anemometer. This instrument ch
measures air velocity, air ow and temperature by placing the sensor into an airway such as a duct or
a vent. The sensor is situated at the end of the telescoping wand for convenience. This device is
shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Please
visit our website (www.extech.com) to check for the latest version and translations of this User Manual.
D escription
Meter Description
1. Probe input jack (insert probe plug here)
2. AC adaptor jack
3. - Power ON OFF button
4. Left arrow button
5. SET button
6. UNIT button
7. -MIN button MAX
8. -RECALL button STORE
9. ZERO and Backlight button
10. Down arrow button
11. Right arrow button
12. Up arrow button
13. LCD display
Note: Battery compartment and Tilt Stand located on the back of the meter
AN500-en-GB_v2.1 5/17
3
Push button Description-
Power: Switches the meter ON and OFF
C/F: Select the temperature units
MAX/MIN: Press to Record and track the highest (MAX) and lowest (MIN) reading
STORE: Store readings into memory
RECALL: Display STORED readings
UNIT: Air velocity units or airow units of measure
ZERO: Press to zero the display
BACKLIGHT: Turn LCD backlight ON and OFF
Atmospheric compensation setting or airow parameters setting SET:
: Atmospheric compensation adjustment arrows (also used for general menu ◄►▲▼
navigation)
Probe Description
1. Probe Connector
2. Probe cabling
3. Telescoping sensor handle - Extends to 39” (1m)
4. Sensor opening (Air must ow through this opening against
the white dot shown on item 5 below for proper
measurement)
5. White dot air direction
6. Ergonomic handle grip

Produktspecifikationer

Varumärke: Extech
Kategori: Mätutrustning
Modell: AN500

Behöver du hjälp?

Om du behöver hjälp med Extech AN500 ställ en fråga nedan och andra användare kommer att svara dig




Mätutrustning Extech Manualer

Extech

Extech PRC20 Bruksanvisning

25 September 2024
Extech

Extech PRC30 Bruksanvisning

25 September 2024
Extech

Extech SD900 Bruksanvisning

25 September 2024
Extech

Extech PRC15 Bruksanvisning

25 September 2024
Extech

Extech 412300A Bruksanvisning

25 September 2024
Extech

Extech 412400 Bruksanvisning

25 September 2024
Extech

Extech 433201A Bruksanvisning

25 September 2024
Extech

Extech SD910 Bruksanvisning

25 September 2024

Mätutrustning Manualer

Nyaste Mätutrustning Manualer