Extech CG104 Bruksanvisning

Extech Mätutrustning CG104

Läs nedan 📖 manual på svenska för Extech CG104 (10 sidor) i kategorin Mätutrustning. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/10
USER MANUAL
Coating Thickness Tester
Model 1 CG 04
2 CG104- -US_V1.9 6/en 21
Introduction
Thank you for selecting the Extech Instruments 1 Coating Thickness Tester. T 1 is a CG 04 he CG 04
portable meter designed for non-invasive coating thickness measurements with automatic
recognition of the material under test.
The meter uses two measurement methods: magnetic induction (for ferrous metal substrates)
and eddy current (for non-ferrous metal substrates).
This device is shipped fully tested and calibrated and, with proper use, will provide years of
reliable service. Please visit our website (www.extech.com) to check for the latest version of this
User Guide, Product Updates, Product Registration, d Customer Support. an
Features
• LED backlighting
• Reversible LCD orientation
• Auto Power OFF
• Low-Battery Indication
• Zero Function and Two-Point Calibration
• Datalogging function
• High-Low Alarm Alerts
• Selectable Measurement Units
• Supplied Zero and Standard Coating Substrates
Description
Meter Description
1. Ferrous/non-ferrous or auto (AT) indicator
2. Unit of measure
3. Measurement reading
4. MENU / Return button
5. Down arrow button
6. ZERO / CLEAR button
7. Backlight and Reverse Display arrow button
8. Escape / Delete button
9. Up Arrow button
10. Sensor
Note: Battery compartment on rear of meter
3 CG104- -US_V1.9 6/en 21
Function Keys
Access the Menu / Enter for confirming an edit
Reverse the display orientation/ press > 2 seconds for Backlight
Revert to previous mode / Delete an entry
Selecting functions, scrolling and setting values
Substrate Zero CAL (short press) / Calibration point clear (press > 2 secs.)
Function Key Notes:
ESC and Arrow keys are disabled in the Measurement mode
Backlight and ZERO buttons are disabled in the menu ‘Options’
Display Icon Description
Fe, N Ferrous and Non-ferrous substrates Fe
AT Auto metal sensing mode
▲▼ High-Low Alarm indicators
MEM MIN-MAX-AVG Recording is active
CAL Calibration is active
µm Micrometer unit of measure
mils mils (unit of measure) = millimeters * 2.54/100
MAX-MIN Maximum minus Minimum reading
MIN, MAX, AVG Minimum, Maximum, or Average reading
n Recalled data point storage serial number
Low battery

Produktspecifikationer

Varumärke: Extech
Kategori: Mätutrustning
Modell: CG104

Behöver du hjälp?

Om du behöver hjälp med Extech CG104 ställ en fråga nedan och andra användare kommer att svara dig


Mätutrustning Extech Manualer

Extech

Extech 44550 Bruksanvisning

18 Mars 2025
Extech

Extech CO15 Bruksanvisning

31 Januari 2025
Extech

Extech 380941 Bruksanvisning

23 Oktober 2024
Extech

Extech 380926 Bruksanvisning

23 Oktober 2024
Extech

Extech PRC20 Bruksanvisning

25 September 2024
Extech

Extech PRC30 Bruksanvisning

25 September 2024
Extech

Extech SD900 Bruksanvisning

25 September 2024
Extech

Extech PRC15 Bruksanvisning

25 September 2024
Extech

Extech 412300A Bruksanvisning

25 September 2024
Extech

Extech 412400 Bruksanvisning

25 September 2024

Mätutrustning Manualer

Nyaste Mätutrustning Manualer

Uni-T

Uni-T UT220 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT681C Bruksanvisning

3 April 2025
Uni-T

Uni-T UT216C Bruksanvisning

3 April 2025
Uni-T

Uni-T UT611 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT210D Bruksanvisning

3 April 2025
Uni-T

Uni-T UT210C Bruksanvisning

3 April 2025
Uni-T

Uni-T UT210B Bruksanvisning

3 April 2025
Uni-T

Uni-T UT682 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT275 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT08A Bruksanvisning

3 April 2025