Fender Tone Master Twin Reverb Blonde Bruksanvisning
Fender
Gitarrförstärkare
Tone Master Twin Reverb Blonde
Läs nedan 📖 manual på svenska för Fender Tone Master Twin Reverb Blonde (12 sidor) i kategorin Gitarrförstärkare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
MODE D’EMPLOI
MANUAL DO PROPRIETÁRIO
BLONDE
A. NORMAL CHANNEL INPUTS: Connect instrument here. Normal
input 1 produces full sensitivity; normal input 2 has adjusted
sensitivity (-6dB) for slightly darker tone and cleaner response
with high-gain instruments.
B. NORMAL CHANNEL BRIGHT SWITCH: High-frequency boost for
normal channel.
C. NORMAL CHANNEL VOLUME: Controls volume level of both
normal channel inputs.
D. NORMAL CHANNEL TREBLE
:
Controls treble response of both
normal channel inputs.
E. NORMAL CHANNEL MIDDLE: Controls midrange response of
both normal channel inputs.
F. NORMAL CHANNEL BASS: Controls bass response of both
normal channel inputs.
G. VIBRATO CHANNEL INPUTS: Connect instrument here to use
built in “vibrato” (tremolo) eect. Input 1 produces full sensitivity;
input 2 has adjusted sensitivity (-6dB) for slightly darker tone and
cleaner response with high-gain instruments.
H. VIBRATO CHANNEL BRIGHT SWITCH: High-frequency boost for
“vibrato” (tremolo) channel.
I. VIBRATO CHANNEL VOLUME: Controls volume level of both
vibrato channel inputs.
J. VIBRATO CHANNEL TREBLE: Controls treble response of both
vibrato channel inputs.
K. VIBRATO CHANNEL MIDDLE: Controls midrange response of
both vibrato channel inputs.
L. VIBRATO CHANNEL BASS: Controls bass response of both
vibrato channel inputs.
M. REVERB: Controls reverb eect level. No reverb is heard when
control is turned fully counterclockwise. Reverb can also be
turned on and o using included two-button footswitch.
N. SPEED: Controls “vibrato” (tremolo) eect rate.
O. INTENSITY: Controls “vibrato” (tremolo) eect depth. No eect
is heard when control is turned fully counterclockwise. Eect can
also be turned on and o using included two-button footswitch.
P. POWER JEWEL: Illuminates red when amplier is on; ashes
between red and amber during warmup. Illuminates amber in
MUTE mode (S).
In a bold Fender rst, the Tone Master Twin Reverb amplier uses
massive digital processing power to achieve a single remarkable
sonic feat: faithfully modeling the circuitry and 85-watt power
output of an original Twin tube amp. Using a high-performance
200-watt digital power amp to achieve the headroom and dynamic
range of a real vintage Twin tube amp, paired with the pronounced
punch and warmth of two Celestion® G12 NEO Creamback speakers
and a resonant pine cabinet, the result is tubeless Twin Reverb tone,
volume and dynamics virtually indistinguishable from the all-tube
original. And with all these features, the Tone Master Twin Reverb is
in fact about only the weight of an all-tube Twin.half
Front panel features give guitarists a playing experience identical
to the tube version, including Fender’s world-standard reverb and
tremolo eects. Additional rear-panel features deliver modern
convenience and exibility—including an output power selector for
full power and ve attenuated settings, balanced XLR line output
with impulse response (IR) cabinet simulations, mute switch for silent
stage or recording use, USB port for rmware upgrades, and more.
Register your Tone Master Twin Reverb online at start.fender.com.
CONTROL PANEL
1
ENGLISH
TONE MASTER
®
TWIN REVERB
®
BLONDE
REAR PANEL
Q. IEC INLET: Connect included power cord to a grounded outlet
in accordance with input power voltage and frequency specied
beside inlet. Universal 100V-240V operation.
R. POWER: Turns amplier on and o.
S. MUTE: Mutes power amp. When in MUTE mode, XLR line output
remains active for studio or “quiet stage” use, and POWER JEWEL
(P) illumination changes from red to amber.
T. OUTPUT POWER
: Selector switch oers full power (85 watts) and
ve other attenuated wattage settings that tailor room/venue
overall loudness. Set amp front-panel channel volume to personal
preference for tube-emulated response, then set OUTPUT POWER
to preferred level.
U. CABINET SIM: When using XLR LINE OUTPUT (X), this BALANCED
switch oers three dierent tonal options—a at, uncolored amp
signal without speaker cabinet emulation (OFF); and two impulse
response (IR) proles emulating dierent speaker/microphone-
placement combinations:
IR PROFILE 1: Dynamic microphone close-mic’ed at edge of
speaker cone center cap for pronounced attack and denition. IR
created using a Shure® SM57 microphone.
IR PROFILE 2: Dynamic microphone close-mic’ed at edge
of speaker cone center cap for increased bass response and
smoother midrange. IR created using a Sennheiser® MD 421
microphone.
V. BALANCED LINE OUTPUT LEVEL: Adjusts output level of XLR
BALANCED LINE OUTPUT (X) for external devices and systems (i.e.,
PA and recording gear), whether mic or line level.
W. GROUND LIFT: When using the XLR LINE OUTPUT (X), BALANCED
engaging this button may eliminate hum or buzz resulting from
connection to improperly grounded equipment.
X. XLR BALANCED LINE OUTPUT: For balanced connection to
external devices and systems (i.e., PA and recording gear). XLR line
output remains active when amp is in MUTE mode (S).
Y. FOOTSWITCH: Connect included two-button footswitch for
reverb and tremolo on/o here.
Z. USB PORT (NOT SHOWN): For rmware updates, a USB port is
located on the underside of the chassis beneath the OUTPUT
POWER section. Visit fender.com/rmware/support for periodic
rmware updates that improve and enhance the Tone Master
experience.
All non-FMIC product names and trademarks appearing in this
manual are the property of their respective owners and are used
solely to identify the products whose sounds were studied during
IR development for this product. The use of these products and
trademarks does not imply any aliation, connection, sponsorship,
or approval between FMIC and with or by any third party.
SPECIFICATIONS
TYPE PR 5184
POWER REQUIREMENTS 450W (max)
POWER AMP OUTPUT
200W
into
4
Ω (simulates 85W tube amp performance)
INPUT IMPEDANCES Input 1 (both channels): 1M
Ω
Input 2 (both channels): 136k
Ω
XLR LINE OUT IMPEDANCE 600
Ω
SPEAKER 2 12” Celestion® G12 NEO Creamback, 8
Ω (PN 7713555000)
FOOTSWITCH Two-button Tone Master (included, PN 7716005000)
COVER Fitted cover (included, PN 0050250000)
DIMENSIONS AND WEIGHT Width: 26.16” (66.4 cm) Height: 20.24” (51.4 cm) Depth: 10.35” (26.3 cm) Weight: 33 lbs. (15 kg)
Product specifications subject to change without notice.
2
ENGLISH
Produktspecifikationer
| Varumärke: | Fender |
| Kategori: | Gitarrförstärkare |
| Modell: | Tone Master Twin Reverb Blonde |
Behöver du hjälp?
Om du behöver hjälp med Fender Tone Master Twin Reverb Blonde ställ en fråga nedan och andra användare kommer att svara dig
Gitarrförstärkare Fender Manualer
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
9 September 2024
8 September 2024
8 September 2024
6 September 2024
4 September 2024
Gitarrförstärkare Manualer
- Gitarrförstärkare Ampeg
- Gitarrförstärkare Vox
- Gitarrförstärkare Roland
- Gitarrförstärkare ART
- Gitarrförstärkare Peavey
- Gitarrförstärkare Boss
- Gitarrförstärkare Marshall
- Gitarrförstärkare Radial Engineering
- Gitarrförstärkare Blackstar
- Gitarrförstärkare Electro Harmonix
- Gitarrförstärkare SPL
- Gitarrförstärkare Harley Benton
- Gitarrförstärkare Hughes & Kettner
- Gitarrförstärkare Laney
- Gitarrförstärkare Ashdown Engineering
- Gitarrförstärkare Palmer
- Gitarrförstärkare Markbass
- Gitarrförstärkare Fishman
- Gitarrförstärkare EBS
- Gitarrförstärkare Suhr
- Gitarrförstärkare Two Notes
- Gitarrförstärkare GR Bass
- Gitarrförstärkare Bugera
- Gitarrförstärkare AMT
- Gitarrförstärkare DV Mark
- Gitarrförstärkare Budda
- Gitarrförstärkare DACS Audio
Nyaste Gitarrförstärkare Manualer
21 Oktober 2024
21 Oktober 2024
25 September 2024
25 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024