Festo DARD-L8-25-S Bruksanvisning

Festo Inte kategoriserad DARD-L8-25-S

Läs nedan 📖 manual på svenska för Festo DARD-L8-25-S (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Translation of the original instructions
LOCTITE 243® is a registered trademark of its respective trademark holder in cer
tain countries.
1 Further applicable documents
All available documents for the product www.festo.com/pk.è
Observe further applicable documents:
– Operating instructions of the linear drive5
2 Safety
2.1 Safety instructions
– Before working on the product, switch off the power supply and secure it
against being switched on again.
– Observe tightening torques. Unless otherwise specified, the tolerance
is±10%. Tightening torques 5 Technical data.è
– Observe the safety data sheet for the adhesive from the original manufac
turer.
2.2 Intended use
Compensating element between the slide(A) of the linear drive and the pay5
load to be moved.
3 Product range overview
3.1 Scope of delivery
1Moment compensator (1x)
2Adhesive LOCTITE 243 (1x)
3Threaded pin (1x)
4Screw (3x)
Fig. 1
3.2 Not in scope of delivery
5Linear drive DLGFG (1x)
Fig. 2
4 Mounting
Positioning the moment compensator
Fig. 3
• Place the moment compensator opposite the sensor slot(X) flush with the1
slide(A).
ÄThe sensor slot(X) is freely accessible.
Attaching the moment compensator
Fig. 4
• Use the screws to attach the moment compensator to the slide(A). Do4 1
not tighten screws .4
Mounting the moment compensator
Fig. 5
1. Apply adhesive to the threaded pin .2 3
2. Screw the threaded pin into the moment compensator .3 1
3. Tighten the threaded pin .3
4. Tighten the screws .4
4.1 Mounting the payload
Hole for spring pin(B)
Fig. 6
• Hole for spring pin(B) provided for centring the payload.
Recommended hole for spring pin(B): 5.2Æ+0.1mm
Mounting the payload on DARD-L8-20/25-S
Fig. 7
• Mount payload with recommended screws using hole(C) or(D) on the
moment compensator .1
Hole(C) Hole(D)
Hole thread M5 M5
Recommended screws 2xM58.8 2xM48.8 ISO4762ß
Recommended tightening torques [Nm] 4.5 2.6
Tab. 1
When mounting the payload using hole(D), the threaded holeM5(C) serves as a
through hole for the screwM4.
8084730
Moment compensator
DARD-L8
8084730
201802a
[8084732]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 3470
www.festo.com
Mounting the payload on DARD-L8-32/40-S
Fig. 8
• Mount payload with recommended screws using hole(E) or(F) on the
moment compensator .1
Hole(E) Hole(F)
Hole thread M5 –
ß 2xM58.8 2xM410.9
ISO4762
Recommended screws
Recommended tightening torques [Nm] 5 3.7
Tab. 2
5 Technical data
5.1 Screw sizes and tightening torques MA
DARD-L8 20 25 32 40
ß M4x18 M4x18 M4x22 M4x224Screw
ISO4762 [Nm] 3 3 3.4 3.4
3 Threaded pin [Nm] 1 1 1 1
Tab. 3

Produktspecifikationer

Varumärke: Festo
Kategori: Inte kategoriserad
Modell: DARD-L8-25-S

Behöver du hjälp?

Om du behöver hjälp med Festo DARD-L8-25-S ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Festo Manualer

Festo

Festo SIEH-M18B-PS-K-L Bruksanvisning

25 Oktober 2024
Festo

Festo SIEF-M12B-PS-S-L Bruksanvisning

25 Oktober 2024
Festo

Festo DHPC-25-A-NC-S Bruksanvisning

25 Oktober 2024
Festo

Festo DPDM-Q-10-30-PA Bruksanvisning

25 Oktober 2024
Festo

Festo DPDM-10-25-PA Bruksanvisning

25 Oktober 2024
Festo

Festo DPDM-10-10-P-PA Bruksanvisning

25 Oktober 2024
Festo

Festo DPDM-10-5-P-PA Bruksanvisning

25 Oktober 2024
Festo

Festo DPDM-10-20-PA Bruksanvisning

25 Oktober 2024
Festo

Festo DPDM-Q-20-10-PA Bruksanvisning

25 Oktober 2024
Festo

Festo PAML-CP-90-HP3-G1 Bruksanvisning

25 Oktober 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024