Festo DASP-V4-12-A-R1 Bruksanvisning

Festo Inte kategoriserad DASP-V4-12-A-R1

Läs nedan 📖 manual på svenska för Festo DASP-V4-12-A-R1 (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
DASP-V4-...-A-R1
Sensor mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8179836
2022-11
[8179838]
8179836
Translation of the original instructions
© 2022 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Contents
Operating instruction Proximity switch
CRSMT-8M-PS-24V-K-...
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The sensor mountingDASP-V4-8-A-R1 fastens proximity switches to the tie
rods of the standards-based cylinders CRDNG-32...-63.
The sensor mountingDASP-V4-12-A-R1 fastens proximity switches to the tie
rods of the standards-based cylinders CRDNG-80...-125.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
Fig.1
1
Sensor mounting (1x)
2
Threaded pin (1x)
4.2 Not in scope of delivery
3
4
Fig.2
3
Standards-based cylinder (1x)
CRDNG
4
Proximity switch (1x)
CRSMT-8M
5 Assembly
1
2
4
A
Fig.3
1. Position the sensor mounting on one of the tie rods[A].1
2. Lightly fix the sensor mounting with the threaded pin .1 2
3. Orient the proximity switch with the cable outlet to the centre of the4
cylinder so all switching positions are possible.
4. Place the proximity switch in the sensor mounting.4
1
4
Fig.4
1. Tighten the screw of the proximity switch .4
Spanner size: 1.5
Tightening torque:0.3Nm±20%
2. Position the sensor mounting and the proximity switch at the desired1 4
switching position.
2
Fig.5
Tighten the threaded pin . Tightening torque:0.8Nm±25%2

Produktspecifikationer

Varumärke: Festo
Kategori: Inte kategoriserad
Modell: DASP-V4-12-A-R1

Behöver du hjälp?

Om du behöver hjälp med Festo DASP-V4-12-A-R1 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Festo Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer