Festo DHAS-GA-B22-S Bruksanvisning

Festo Inte kategoriserad DHAS-GA-B22-S

Läs nedan 📖 manual på svenska för Festo DHAS-GA-B22-S (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Translation of the original instructions
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Adaptive shape gripper DHEF Operating
Tab. 1
2 Safety
2.1 Safety instructions
Only assemble the product on components that are in a condition to be safely
operated.
2.2 Intended use
Grip the outside of objects in combination with adaptive shape gripper DHEF
(wearing part).
3 Product range overview
3.1 Scope of delivery
1Inverting cap (1x)
Fig. 1
3.2 Not in scope of delivery
2Adaptive shape gripper (1x)
DHEF
Fig. 2
4 Mounting
4.1 Preparation
For replacement:
Remove old inverting cap from shape gripper instruction manual for theè
adaptive shape gripperDHEF Replacement chapter.è
4.2 Replacing inverting cap
Fig. 3 Remove old inverting cap
1. Loosen knurled nut[B].
2. Separate knurled nut[B], bayonet catch[C], threaded bush[D] and inverting
cap[A].
Fig. 4 Assemble inverting cap
Pull inverting cap over the threaded bush[D].1
ÄSealing rim[E] is seated completely over the collar [F].
Fig. 5 Mount bayonet catch
1. Align rotation lock[X] on the bayonet catch[C] with the spring pin[G].
2. Place bayonet catch[C] on the threaded bush[D].
3. Place knurled nut[B] on the threaded bush and screw on to the stop.
Fig. 6 Mount inverting cap
1. Evert inverting cap .1
ÄThe inside of the inverting cap tip[H] is visible.
2. Press the inverting cap tip[H] into the coupling[J] of the piston rod.
ÄThe releasing ring snaps back audibly.
3. Check that O-ring[K] is undamaged and correctly seated in the slot.
Fig. 7 Close bayonet catch
1. Position bayonet catch[C] on the shape gripper .2
2. Turn bayonet catch[C] as shown by the mark (approx.45°).
ÄBayonet catch[C] audibly locks.
8104615
DHAS-GA-B22-S
Inverting cap
8104615
2019-02
[8104617]
Instructions| Assembly
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com

Produktspecifikationer

Varumärke: Festo
Kategori: Inte kategoriserad
Modell: DHAS-GA-B22-S

Behöver du hjälp?

Om du behöver hjälp med Festo DHAS-GA-B22-S ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Festo Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer