Fluke TiR3FT Bruksanvisning

Fluke Inte kategoriserad TiR3FT

Läs nedan 📖 manual på svenska för Fluke TiR3FT (132 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 17 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/132

TiR2,TiR3,TiR4,

Ti40,Ti45,Ti50,Ti55

IR FlexCam Thermal Imagers

Users Manual

January 2007, Rev.2, 5/09

Specifications subject to change without notice.

All product names are trademarks of their respective companies.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship

under normal use and service. The warranty period is two years and begins on the date of

shipment. Parts, product repairs, and services are warranted for 90 days. This warranty

extends only to the original buyer or end-user customer of a Fluke authorized reseller,

and does not apply to fuses, disposable batteries, or to any product which, in Fluke's

opinion, has been misused, altered, neglected, contaminated, or damaged by accident or

abnormal conditions of operation or handling. Fluke warrants that software will operate

substantially in accordance with its functional specifications for 90 days and that it has

been properly recorded on non-defective media. Fluke does not warrant that software will

be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-

user customers only but have no authority to extend a greater or different warranty on

behalf of Fluke. Warranty support is available only if product is purchased through a Fluke

authorized sales outlet or Buyer has paid the applicable international price. Fluke re-

serves the right to invoice Buyer for importation costs of repair/replacement parts when

product purchased in one country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price,

free of charge repair, or replacement of a defective product which is returned to a Fluke

authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain

return authorization information, then send the product to that service center, with a de-

scription of the difficulty, postage and insurance prepaid (FOB Destination). Fluke as-

sumes no risk for damage in transit. Following warranty repair, the product will be re-

turned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure

was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition

of operation or handling, including overvoltage failures caused by use outside the prod-

uct’s specified rating, or normal wear and tear of mechanical components, Fluke will pro-

vide an estimate of repair costs and obtain authorization before commencing the work.

Following repair, the product will be returned to the Buyer transportation prepaid and the

Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-

TICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF

DATA, ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty,

or exclusion or limitation of incidental or consequential damages, the limitations and ex-

clusions of this warranty may not apply to every buyer. If any provision of this Warranty is

held invalid or unenforceable by a court or other decision-maker of competent jurisdiction,

such holding will not affect the validity or enforceability of any other provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

To register your product online, visit register.fluke.com

Table of Contents

Chapter Title Page

1 Introduction .............................................................................. 1-1

Introduction .......................................................................................... 1-1

Contacting Fluke................................................................................... 1-2

Safety Information ................................................................................ 1-2

Standard Accessories ............................................................................ 1-4

Charge and Insert Battery ..................................................................... 1-6

Power Camera On................................................................................. 1-7

Insert Memory Card.............................................................................. 1-8

Focus..................................................................................................... 1-8

Set Temperature Level and Span .......................................................... 1-9

Set IR-Fusion® Blend Level................................................................. 1-9

Capturing an Image............................................................................... 1-10

SmartView Software for Your PC ........................................................ 1-11

2 Camera Overview ..................................................................... 2-1

Introduction .......................................................................................... 2-1

Camera Parts......................................................................................... 2-2

Camera Display Screen......................................................................... 2-6

Programming Function Buttons............................................................ 2-10

Using Display Screen Menus................................................................ 2-12

Inserting and Removing Memory Card................................................. 2-13

3 Basic Operation........................................................................ 3-1

Acquiring and Reviewing Images......................................................... 3-1

Scan Target ....................................................................................... 3-1

Pause/Save Image ............................................................................. 3-1

View Saved Image............................................................................ 3-2

Delete Saved Image .......................................................................... 3-2

Electronic Zoom ................................................................................... 3-3

Saved Image Information...................................................................... 3-4

4 Analyzing and Enhancing Images .......................................... 4-1

Setting Emissivity and Background Temperature................................. 4-1

Fixed Image Function ........................................................................... 4-2

Changing Color Palettes ....................................................................... 4-2

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

Setting Temperature Level and Span.................................................... 4-3

Manual Level and Span.................................................................... 4-3

Automatic Level and Span ............................................................... 4-4

Arbitrary Fixed Temperature Level and Span.................................. 4-4

Using Palette Saturation Colors............................................................ 4-5

Using Display Screen Temperature Markers........................................ 4-7

Annotations .......................................................................................... 4-9

Adding Annotations to Saved Images .............................................. 4-9

Creating Annotations Lists in SmartView........................................ 4-12

5 Visible Light Camera Module (VLCM) .................................... 5-1

Enabling/Disabling Visible Light Camera Module .............................. 5-1

Using Image Alignment ....................................................................... 5-1

Focusing ............................................................................................... 5-2

Adjusting IR-VL IR-Fusion® Blend Level.......................................... 5-3

Using Full Screen or Picture-in-Picture View ...................................... 5-4

Adjusting Brightness and Color Controls............................................. 5-4

Using Torch Control............................................................................. 5-5

Using Visible Light Flash..................................................................... 5-5

Recording Visible Light Images........................................................... 5-6

Using Laser Pointer.............................................................................. 5-7

Using Thumbnail Browser ................................................................... 5-7

Using Color Alarms ............................................................................. 5-8

Using Menu to Adjust Color Alarm Ranges..................................... 5-8

Using Palette Bar to Adjust Color Alarm Ranges ............................ 5-9

6 Camera Setup........................................................................... 6-1

Adjusting Display Screen Brightness ................................................... 6-1

Hiding Display Screen Task Bar .......................................................... 6-2

Hiding Display Screen Color Palette.................................................... 6-2

Setting Temperature Units.................................................................... 6-3

Setting Temperature Calibration Range ............................................... 6-3

Changing Lens Selection...................................................................... 6-3

Setting Date and Time.......................................................................... 6-4

Changing the Language........................................................................ 6-6

Saving and Reloading Camera Settings................................................ 6-6

Naming Image Files ............................................................................. 6-7

Changing Image File Name Prefix ....................................................... 6-8

Resetting Image File Name Sequence Number .................................... 6-9

Selecting Video Output Options........................................................... 6-9

7 Advanced Operation................................................................ 7-1

Enhancing the Image............................................................................ 7-1

Using Auto Capture.............................................................................. 7-1

Using User-Defined Display Screen Temperature Markers ................. 7-4

Using Internal Recalibration................................................................. 7-7

8 Camera Care............................................................................. 8-1

Cleaning the IR Lens, VLCM, Display Screen, and Body ................... 8-1

Using Other Lenses .............................................................................. 8-2

Contents (continued)

iii

Viewing Camera and Battery Information ............................................ 8-2

Charging the Batteries .......................................................................... 8-3

Recalibrating the Batteries.................................................................... 8-4

Conserving Battery Power .................................................................... 8-5

Appendices

A Glossary ........................................................................................ A-1

B Troubleshooting ............................................................................ B-1

C Emissivity Values ......................................................................... C-1

D Camera Specifications and Dimensions ........................................ D-1

E Resources and References............................................................. E-1

F Camera Default Settings ............................................................... F-1

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

List of Tables

Table Title Page

1-1. Symbols ................................................................................................ 1-4

1-2. Standard Accessories ............................................................................ 1-6

2-1. Camera Parts--Descriptions .................................................................. 2-6

2-2. Display Screen--Descriptions ............................................................... 2-11

2-3. Programmable Functions ...................................................................... 2-14

4-1. Standard Saturation Colors ................................................................... 4-8

8-1. Remaining Battery Charge Indicators................................................... 8-3

8-2. Battery Charging Status ........................................................................ 8-4

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

vii

List of Figures

Figure Title Page

1-1. Standard Accessories ............................................................................ 1-5

1-2. Inserting the Battery.............................................................................. 1-7

1-3. Turning the Power On and Off ............................................................. 1-7

1-4. Inserting a Memory Card...................................................................... 1-8

1-5. Focusing the Camera ............................................................................ 1-8

1-6. Setting the Level and Span ................................................................... 1-9

1-7. Setting the IR-Fusion® Blend Level..................................................... 1-10

1-8. Capturing an Image............................................................................... 1-11

2-1. Camera Back View............................................................................... 2-3

2-2. Camera Front and Top View................................................................. 2-3

2-3. Camera Bottom View ........................................................................... 2-3

2-4. Camera Display Screen--Example 1..................................................... 2-6

2-5. Camera Display Screen--Example 2..................................................... 2-7

2-6. Camera Display Screen--Example 3..................................................... 2-7

2-7. Inserting and Removing a Memory Card.............................................. 2-13

5-1. Aligning the 20-mm Lens ..................................................................... 5-2

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

viii

1-1

Chapter 1

Introduction

Thank you for choosing the IR FlexCam

® portable infrared camera (referred to

hereafter as the “Camera”). This award-winning Camera offers some of the

most advanced, yet most intuitive, fully-radiometric solutions available. The

visible light camera module (VLCM) and IR-Fusion

® functions make it easier

than ever to manage and analyze images captured with this system and

improve reporting abilities. The unique control image and IR-Fusion

technology enables you to combine visible light images—like a normal digital

camera—and infrared images together to create a single image with greatly

enhanced detail. This is especially helpful in low contrast scenes where the

temperature differential is minimal and the infrared image appears to be all one

color.

The IR FlexCam is available in 7models. The TiR2, Ti40 and Ti45 cameras

use a detector with 160 x 120 resolution. The TIR3, TiR4, Ti50 and Ti55

cameras use a detector with 320 x 240 resolution. Refer to Appendix D for

specific features available on your camera.

Your Camera is powerful and easy to use in a wide range of applications

including:

Predictive Maintenance

• Electrical Systems—Identify circuit overloads before they happen.

• Mechanical Systems—Reduce downtime and prevent failures.

• Utilities—Monitor substations, transmission lines, etc. efficiently and

accurately.

Building Science

• Roofing—Detect and isolate water saturation quickly and efficiently.

• Building Envelope—Perform commercial and residential infrared energy

audits.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

1-2

• Moisture Detection—Get to the source of moisture and mold growth.

• Restoration—Evaluate remediation work to make sure area is completely

dry.

Research and Development

• Visualize and quantify generated heat patterns to improve products and the

processes used to create them.

Process Monitoring

• Monitor and observe temperatures of processes in real-time.

To quickly take advantage of the many functions your Camera offers, we

recommend that you carefully read this manual. It is designed to familiarize

you with the most important aspects of your camera and guide

you in using the features of this system. This manual provides instruction on

how to capture high quality images; however, thermography is a sophisticated

field often requiring special training that is not covered in this manual. If you

would like information on thermography training, contact Fluke Corporation .

Contacting Fluke

To contact Fluke, call:

1-800-760-4523 in USA

1-800-363-5853 in Canada

+31-402-675-200 in Europe

+81-3-3434-0181 in Japan

+65-738-5655 in Singapore

+1-425-446-6888 from anywhere in the world

Or, visit Fluke's website at www.fluke.com.

To register your product, visit http://register.fluke.com.

To view, print, or download the latest manual supplement, visit

http://us.fluke.com/usen/support/manuals.

Safety Information

Use your Camera only as specified in this manual.

A W Warning identifies hazardous conditions and actions that could cause

bodily harm or death.

Introduction

Safety Information

1-3

A W Caution identifies conditions and actions that could damage the camera

or cause permanent loss of data.

W Caution

• To avoid damaging your Camera, treat it with care as you

would any type of precision equipment.

• Your infrared camera is a precision instrument that uses a

sensitive infrared (IR) detector. Pointing your camera

towards highly-intense energy sources—including devices

that emit laser radiation and reflections from these

devices—may adversely affect camera accuracy and may

harm or permanently damage your camera’s IR detector.

• Your camera was calibrated prior to shipping. We

recommend that you have your camera checked for proper

calibration every two years. Some ISO 9000 programs

require more frequent checks for certification. Contact

Fluke for details.

• Your camera requires three minutes to warm up before

accurate measurements are available.

*W Warning

• Your camera contains a Class 2 laser pointer. See diagram

in Appendix B for laser aperture location.

• To avoid eye damage, do not point laser directly at eye or

indirectly off reflective surfaces.

• Use of controls or adjustments or performance or

procedures other than those specified herein may result in

hazardous laser radiation exposure.

• Do not use camera in a manner not specified in this

manual or the protection provided by the equipment may

be impaired.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

1-4

See Table 1-1 for a list of symbols used in this manual.

Table 1-1. Symbols

Symbol Description Symbol Description

* Class 2 laser pointer Hg Contains Mercury. Dispose

Properly.

On Off Symbol W Important information. See

manual.

P Conforms to requirements of European Union and European Free

Trade Association.

~ Do not dispose of this product as unsorted municipal waste. Go to

Fluke's website for recycling information.

This camera contains a lithium battery. Do not mix with the solid

waste stream. Spent batteries should be disposed of by a qualified

recycler or hazardous materials handler per local regulations.

Contact your authorized Fluke Service Center for recycling

information.

Standard Accessories

If any of the standard accessories shown in Figure 1-1 and described in

Table 1-2 are missing or damaged, contact a Fluke customer service

representative.

Introduction

Standard Accessories

1-5

eii001.eps

Figure 1-1. Standard Accessories

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

1-6

Table 1-2. Standard Accessories

Number Description

A Portable Infrared Camera with Lens Cap

B Camera Carrying Case

C LCD Cleaning Cloth

D AC adapters (2) or equivalent

E Auxiliary AC Power Supply (TiR2, TiR4, Ti45 and Ti55 only)

or equivalent

F AC Patch Cord or equivalent

G Neck Strap

H Video Cable

I AC Power Supply

J Battery Charger

K Compact Flash Memory Card

L Two Rechargeable Batteries

M Multifunction Memory Card Reader with USB Adapter

N Getting Started Guide

O SmartView® Software CD (includes SmartView Users Manual)

P FlexCam Documentation CD (Users Manuals)

Charge and Insert Battery

Charge the batteries for 3 hours before use. Use only the rechargeable batteries

supplied. A battery is fully charged when the green LED light on the charger

remains solid.

Insert the charged battery into the slot on the bottom of the camera as shown in

Figure 1-2.

Note

You may use the auxiliary AC power supply to connect the camera to

a working AC outlet until at least one of the batteries is charged.

Introduction

Power Camera On

1-7

eii002.eps

Figure 1-2. Inserting the Battery

Power Camera On

With a charged battery inserted, or AC power supply connected, press D as

shown in Figure 1-3. D lights up green, and the start-up screen appears after

approximately 10 seconds.

Note

After powering on your camera, the camera requires a boot up and

warm up period of approximately 30 seconds in order to maintain a

crisp, clear, real-time image. Three minutes after powering on the

camera, the temperature measurement accuracy will be within the

specification requirements.

Note

Because of the thermal mass for the optional 54 mm lens, a warm up

period of 30 minutes is necessary for optimum temperature

measurement.

On/Off

eii003.eps

Figure 1-3. Turning the Power On and Off

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

1-8

Insert Memory Card

1. Pull cover up and rotate as shown in Figure 1-4.

2. Insert the Compact Flash memory card into the slot with the card’s

connection end pointed at the camera and the label with MB size facing

the back of the camera.

3. Look for the “Compact Flash Card inserted” message on the camera

display screen.

4. Close the cover.

eii004.eps

Figure 1-4. Inserting a Memory Card

Focus

Remove the lens cap, point the lens at the target, and manually rotate the lens

with your finger, as shown in Figure 1-5, until the image is in focus.

eii005.eps

Figure 1-5. Focusing the Camera

Introduction

Set Temperature Level and Span

1-9

Set Temperature Level and Span

1. Press G

GG as shown in Figure 1-6 to automatically set the camera’s

temperature level and span.

2. Press G

GG again as needed to properly scale the image.

Level & Span

eii006.eps

Figure 1-6. Setting the Level and Span

Set IR-Fusion® Blend Level

Note

IR-Fusion® blending is disabled with optional 10 and 54-mm lenses.

1. Press and hold G

GG until the IR-Fusion ® blend level dialog box appears on

the display screen.

2. While continuing to press G

GG, use the mouse controller shown in

Figure 1-7 to slide the IR-Fusion® blend level bar in the dialog box to the

desired setting.

3. Tap the trigger button ( ) to retain settings.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

1-10

Level & Span

Mouse Controller

eii007.eps

Figure 1-7. Setting the IR-Fusion® Blend Level

Capturing an Image

1. Tap once (shown in Figure 1-8) to pause the live image.

2. Review the image and camera settings.

3. Press and hold for 2 seconds to capture (save) the image. The image file

name appears in the upper left-hand corner of the display screen indicating

the image is saved on the memory card.

Note

The memory card must be inserted into the camera to save and store

images.

4. Tap to return to scan target mode.

Introduction

SmartView Software for Your PC

1-11

Trigger

eii008.eps

Figure 1-8. Capturing an Image

SmartView Software for Your PC

Your system includes a CD containing SmartView® software that you install

on your personal computer. SmartView, together with your Camera, enables

you to:

• Transfer thermographic images to a computer and efficiently manage them

• Optimize and analyze your infrared and visible light control images

• Create and print detailed, professional reports containing important

image data

SmartView image analysis software is compatible with any personal computer

running Microsoft Windows 2000/XP/Vista (32 bit). This software is provided

on the SmartView CD-ROM disk included with your camera.

To install SmartView software on your computer:

1. Start your computer and close any open applications.

2. Insert the CD-ROM disk containing the SmartView software in the

CD-ROM drive.

If the SmartView CD does not start automatically, use Windows explorer

to locate the file named "setup.exe" on the CD-ROM. Start the CD by

double-clicking the setup.exe file.

3. Follow the on-screen instructions to complete the installation.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

1-12

2-1

Chapter 2

Camera Overview

Introduction

Your Camera is a compact, lightweight system that offers a generous five-inch

display module you can position for optimal viewing. You can also rotate the

lens module to easily capture target images on ceilings, hidden above high

objects, under low obstacles, or in other hard-to-reach places. In addition, you

can position the camera for comfortable desktop image analysis and can mount

the system on a standard tripod to continuously monitor a single location.

Although your Camera is a sophisticated imaging system with many advanced

functions, it is easy to operate using buttons, mouse-controlled menu options,

or a combination of both.

The visible light camera module (VLCM) adds a 1.3 mega pixel visible light

sensor that improves your ability to identify and analyze thermal anomalies

and to provide visible light control images for your reports.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

2-2

Camera Parts

Camera features and controls are shown in Figures 2-1, 2-2, and 2-3 and

described in Table 2-1.

1 2 3

9 10

Fl se onlyuke u 11 12

eii009.eps

Figure 2-1. Camera Back View

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

2-4

Table 2-1. Camera Parts – Descriptions

Item Description

A Mouse controller – Used to control the pointer position in images and

text menus.

B E select button – Performs mouse click, or “enter” function, for

the pointer.

C F Menu button – Used to access display screen menus. Note: Tap

F once and a popup menu appears.

A Programmable function button – Can be programmed to

perform different menu functions, see Programming Function Buttons

later in this Chapter.

B Programmable function button – Can be programmed to

perform different menu functions, see Programming Function Buttons

later in this Chapter.

C Programmable function button – Can be programmed to

perform different menu functions, see Programming Function Buttons

later in this Chapter.

D Power on or off button – Used to power camera on and off and

to place the camera in a low-power standby mode to conserve battery

power.

Solid green = power is on; Blinking green = standby mode enabled.

H Auxiliary power port – Connection port for AC to DC power adapter.

I Reset – Hidden switch to reset camera. Can be accessed with a paper

clip. See, “Appendix B – Troubleshooting”.

J Battery latch – Used to remove battery.

K Liquid Crystal Display (LCD) screen – Sunlight-readable color display

for viewing images and accessing camera menu functions.

G LEVEL & SPAN button – Used to rescale the color palette to the

maximum and minimum temperatures in current image and to adjust IR

IR-Fusion® level.

M Infrared lens – Germanium lens with manual focus.

Camera Overview

Camera Parts

2-5

Table 2-1. Camera Parts--Descriptions (cont.)

Item Description

Torch/Flash – When enabled, the torch illuminates darker work areas.

When enabled, the flash lights the target object during image capture

for better-quality visible light images. The torch and flash can be

enabled at the same time.

O Visible light lens – Captures visible light control images.

P Laser – Used to point out the object you are aiming the camera

towards.

Trigger button – Used to pause and/or save an image frame. Also

used to accept a setting change (i.e., OK click), close a menu page, and

to return to scan target mode.

R Video port – RCA video jack used to connect camera to a TV or video

monitor.

S CompactFlash memory card slot – Ejection button and slot for

CompactFlash memory card.

T Hand strap – Adjustable strap for added stability when capturing

images.

U Neck strap mount – Pins for attaching neck and/or shoulder strap.

V Tripod mount – Standard 1/4-20 threaded hole for mounting camera

on tripod.

W Battery – Fluke 7-volt lithium-ion battery for primary power.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

2-6

Camera Display Screen

Display screen features and controls are shown in Figures 2-4, 2-5, and 2-6 and

described in Table 2-2.

eii012.eps

Figure 2-4. Camera Display Screen – Example 1

Camera Overview

Camera Display Screen

2-7

eii013.eps

Figure 2-5. Camera Display Screen – Example 2

eii014.eps

Figure 2-6. Camera Display Screen – Example 3

Camera Overview

Camera Display Screen

2-9

Table 2-2. Display Screen – Descriptions (cont.)

Item Description

Center box with temperatures – Center 50 by 50 pixel box with the

maximum, average, and minimum temperatures in the box (when

enabled).

O Hot cursor temperature – Temperature and location of the hottest

temperature in the image; always in red (when enabled).

P Cold cursor temperature – Temperature and location of the coldest

temperature in the image; always in blue (when enabled).

Q Analysis point – Temperature of marker point in the image. You can

add up to three marker points (when enabled).

R Analysis area – Min., avg., and max. temperatures of the marker area

in the image. You can add up to three marker areas (when enabled).

Picture-in-picture (PIP) – The fused, or blended, infrared/visible light

image appears in the center quarter of the display screen and the

visible light image appears in the rest of the display screen (when

enabled).

IR-Fusion® blend level dialog box – Used to change the IR-Fusion®

blend level from full infrared (IR) to full visible light (VL) or some

combination in between. Disabled when using optional 10 and 54-mm

lenses.

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55

Users Manual

2-10

Programming Function Buttons

You can assign any of the functions described in Table 2-3 to any one of three

programmable buttons: A B C, , (see Appendix F for a list of default

settings). See programming instructions on the next page.

Table 2-3. Programmable Functions

Item Description

Centerpoint/Centerbox – Used to cycle the centerpoint on, then

centerpoint and centerbox on, then the centerpoint and centerbox

both off.

Zoom – Used to quickly cycle between 2x, 4x, 8x zoom, and normal

display settings (zoom options vary by camera model; see

Appendix D).

Brightness – Used to quickly cycle through the display screen

brightness settings: “Dim,” “Normal,” and “Bright.” Each time you

press the function button, the next setting takes affect.

Annotation – Used to quickly access the image annotation editor

(available on TiR2, TiR4,Ti45 and Ti55 models only).

Browse Images – Used to immediately recall the last saved or last

viewed image.

Browse Thumbnails – Used to quickly browse thumbnails of

images stored on the CompactFlash memory card.

Palette Visible – Used to quickly cycle the color palette bar on or off

the display screen.

Marker Toolbar Visible – Used to show or hide the marker toolbar

for adding extra visible marker points or areas to the image and

displaying temperatures near them.

Torch – Used to quickly switch the LED light on or off. When on,

light shines continuously to brighten up dark work areas; light

automatically times out after 60 seconds.

Produktspecifikationer

Varumärke:	Fluke
Kategori:	Inte kategoriserad
Modell:	TiR3FT

Behöver du hjälp?

Om du behöver hjälp med Fluke TiR3FT ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Fluke Manualer

Fluke Pro3000 Bruksanvisning

12 Mars 2025

Fluke 438-II Bruksanvisning

9 Oktober 2024

Fluke ii500 Bruksanvisning

7 Oktober 2024

Fluke T5-1000 Bruksanvisning

5 Oktober 2024

Fluke CableAnalyzer DSX-8000 Bruksanvisning

1 Oktober 2024

Fluke 700HTH Bruksanvisning

29 September 2024

Fluke iSee TC01A Bruksanvisning

26 September 2024

Fluke P5515 Bruksanvisning

24 September 2024

Fluke Ti27 Bruksanvisning

23 September 2024

Fluke 700PA3 Bruksanvisning

22 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Silver Cross Geneva Wardrobe Bruksanvisning

25 Mars 2025

Airlive POE-GSH402-BT Bruksanvisning

25 Mars 2025

ETON UG VW T5 F3.2 Bruksanvisning

25 Mars 2025

Ikan PT4500S-TMW Bruksanvisning

25 Mars 2025

WEG MPW18-3-D004 Bruksanvisning

25 Mars 2025

Vello HGS-2 Bruksanvisning

24 Mars 2025

Genexis FiberBox XGS2120 Bruksanvisning

24 Mars 2025

Autel MaxiSys Ultra S2 Bruksanvisning

24 Mars 2025

Thermador VTN2DA Bruksanvisning

24 Mars 2025

Kanto CM-EXT60 Bruksanvisning

24 Mars 2025