Frigidaire FRT17HB3JW Bruksanvisning

Frigidaire kylskåp FRT17HB3JW

Läs nedan 📖 manual på svenska för Frigidaire FRT17HB3JW (8 sidor) i kategorin kylskåp. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
P/N 241857201 (Sept 2007)
Important Safety Instructions ........... 2
Installation .......................................... 3
Connecting Water Supply ................. 4
Door Removal Instructions ............... 5
Temperature Controls ....................... 8
Ice Service .......................................... 9
Normal Operating Sounds & Sights . 10
Care and Cleaning ............................. 10
Warranty ............................................. 12
Before you Call .................................. 13
Use & Care Manual
Refrigerator
Top Mount
Got Questions?
Need Parts or Service?
Before Calling Your
Local Repair Service - CALL:
(United States)
1-800-944-9044
(Canada)
1-800-668-4606
Resolve many service issues over the
phone at your convenience!
If we can’t resolve your service issue,
we’ll schedule a reputable local
service technician for you!
Order Genuine Electrolux Parts &
Accessories
Purchase Extended Warranty
Protection
Solutions Hotline
READ AND SAVE THESE INSTRUCTIONS
3
INSTALLATION
This Use & Care Manual provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
C AU TIO N C AU TIO N C AU TIO N C AU TIO N C AU TIO N
Do Not install the refrigerator where the temperature will
drop below 55°F (13°C) or rise above 110°F (43°C). The
compressor will not be able to maintain proper
temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
Installation Clearances
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8”
Back 1”
N O T EN O T EN O T EN O T EN O T E
If you see black coils/tubing on the back of your refrigerator
(air-cooled condenser) leave 3” clearance at top of
refrigerator.
DOOR OPENING
Your refrigerator should be positioned to allow easy access to
a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See
Door
Removal & Reversal Instructions
.
N O T EN O T EN O T EN O T EN O T E
If your refrigerator is placed with the door hinge side against
a wall, you may have to allow additional space so the door
can be opened wider.
IMPORTANT
If you install your refrigerator in a garage or other unheated
area, you may experience freezer temperature problems
during the winter months when temperatures dip below
55° F.
Upgrading your refrigerator with a Garage Kit will lower the
minimum operating temperature of your unit to 34° F. This kit
can be ordered through the
Electrolux Solutions Hotline
(see
back cover).
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
2. Use flat-blade screwdriver
or 3/8socket wrench to
adjust front rollers. Use
adjustable wrench to
adjust leveling screws.
Raise
Adjustable Front Roller
(some models)
Stationary Front Roller
with Leveling Screw
(some models)
N O T EN O T E
N O T EN O T E
N O T E
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope ¼
to ½” from front to back. Then level the refrigerator from side
to side.
To Level Your Refrigerator:
1. Remove toe grille.
6
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off.)
Figure 1 Style Handles
1. Remove two screws attaching handle to top of refrigerator
door.
2. Remove screw attaching bottom of handle to door.
3. Remove two hole plugs and hinge pin plug on top of door
and install on opposite side. Use Phillips head screwdriver
to remove plastic screw plug from front of door and install
on opposite side
Figure 2 Style Handles
1. Remove two screws attaching handle to top of refrigerator
door.
2. Swing top of handle away from door and slide handle
down and off of dovetail button.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Remove short trim piece by sliding trim straight up and off
of handle bracket.
3. Remove screw attaching top of handle to door.
4. Self-Adhesive Nameplate Models: Gently peel off
nameplate from door and reapply over old handle holes.
Handle
Screw
Screw
Self Adhesive
Nameplate
(some models)
Nameplate
Trim
Handle
Screw
Screw
Dovetail
Button
Lock Handle
over
Dovetail Button
Self Adhesive
Nameplate
(some models) Nameplate
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, using the same holes as nameplate.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Remove button plug using edge of putty knife.
3. Remove screw on side of freezer door and remove
handle.
N O T EN O T EN O T EN O T EN O T E
Some models have “pocket” handles, which are recessed
into the sides of the door. On these models, only the hinges
will need to be reversed.
TO ATTACH FREEZER
HANDLE:
1. Reinstall handle on
opposite side, using
same hole as
nameplate.
2. Attach handle to
bottom of door.
3. Slide trim piece
straight down onto
handle bracket.
TO ATTACH
FREEZER HANDLE:
1. Secure side of
handle to door and
replace button
plug.
2. Secure handle to
bottom of door.
TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim attaches to the handle
bracket (Figure 1) or fits around the base of the handle (Figure
2). An adhesive “trim lock” is positioned about halfway down.
The bottom of the trim is held in place by either an adhesive
trim lock, or a trim lock with two prongs inserted into a hole on
the face of the door.
TO REMOVE TRIM:
1. Remove trim by gently pulling trim lock areas out and
away from door.
2. When trim is free from door, slide the trim straight down
and away from base of handle.
N O T EN O T EN O T EN O T EN O T E
For models with short handle trim, remove by sliding trim
straight down and off of handle bracket.
4. Self-Adhesive Nameplate Models: Use putty knife to
gently peel off nameplate from door and reapply over old
handle holes.
TO ATTACH FREEZER HANDLE:
1. Start with handle
offset away from
door. Place top of
handle over dovetail
button, swing
handle into an
upright position and
pull downward,
locking it into place.
2. Secure bottom of
handle with two
screws removed
earlier.

Produktspecifikationer

Varumärke: Frigidaire
Kategori: kylskåp
Modell: FRT17HB3JW

Behöver du hjälp?

Om du behöver hjälp med Frigidaire FRT17HB3JW ställ en fråga nedan och andra användare kommer att svara dig




kylskåp Frigidaire Manualer

kylskåp Manualer

Nyaste kylskåp Manualer