Fujitsu ARYG30LMLE Bruksanvisning

Fujitsu Luftkonditionering ARYG30LMLE

Läs nedan 📖 manual på svenska för Fujitsu ARYG30LMLE (17 sidor) i kategorin Luftkonditionering. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/17

EnglishDeutschFrançaisEspañolItalianoE vIkλλη άPortuguês

Русский

Turkiçe

INSTALLATION MANUAL

For authorized service personnel only.

INSTALLATIONSANLEITUNG

Nur für autorisiertes Personal.

MANUEL D'INSTALLATION

Pour le personnel agréé uniquement.

MANUAL DE INSTALACIÓN

Solo para personal autorizado.

MANUALE D'INSTALLAZIONE

Ad uso esclusivo del personale autorizzato.

ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ

Για εξουσιοδοτημένο προσωπικό σέρβις.

MANUAL DE INSTALAÇÃO

Apenas para técnicos autorizados.

РУКОВОДСТВО ПО УСТАНОВКЕ

Для уполномоченного персонала .

KURULUM KILAVUZU

Yetkili servis personeli içindir.

PART NO. 9379127035-02

AIR CONDITIONER

En-1

CAUTION

Read carefully all security information before use or install the air conditioner.

Do not attempt to install the air conditioner or a part of the air conditioner by yourself.

This unit must be installed by qualified personnel with a capacity certificate for handling

refrigerant fluids. Refer to regulation and laws in use on installation place.

e installation must be carried out in compliance with regulations in force

in the place

of installation and the installation instructions of the manufacturer.

This unit is part of a set constituting an air conditioner. It must not be installed alone or

with non-authorized by the manufacturer.

Always use a separate power supply line protected by a circuit breaker operating on all

wires with a distance between contact of 3mm for this unit.

The unit must be correctly grounded and the supply line must be equipped with a

differential breaker in order to protect the persons.

The units are not explosion proof and therefore should not be installed in explosive

atmosphere.

Never touch electrical components immediately after the power supply has been turned

off. Electric shock may occur. After turning off the power, always wait 5 minutes before

touching electrical components.

This unit contains no user-serviceable parts. Always consult authorized service

personnel to repairs.

When moving, consult authorized service personnel for disconnection and installation of

the unit.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised to ensure that they do

not play with the appliance.

2. ABOUT THE UNIT

2.1. Precautions for using the R410A refrigerant

WARNING

Do not introduce any substance other than the prescribed refrigerant into the

refrigeration cycle.

If air enters the refrigeration cycle, the pressure in the refrigeration cycle will become

abnormally high and cause the piping to rupture.

If there is a refrigerant leakage, make sure that it does not exceed the concentration

limit.

If a refrigerant leakage exceeds the concentration limit, it can lead to accidents such as

oxygen starvation.

Do not touch refrigerant that has leaked from the refrigerant pipe connections or other

area. Touching the refrigerant directly can cause frostbite.

If a refrigerant leakage occurs during operation, immediately vacate the premises and

thoroughly ventilate the area.

If the refrigerant comes in contact with a ﬂ ame, it produces a toxic gas.

2.2. Special tool for R410A

WARNING

To install a unit that uses the R410A refrigerant, use dedicated tools and piping

materials that have been manufactured speciﬁ cally for R410A use.

Because the pressure of the R410A refrigerant is approximately 1.6 times higher than

the R22, failure to use dedicated piping material or improper installation can cause

rupture or injury.

Furthermore, it can cause serious accidents such as water leakage, electric shock, or

ﬁ re.

Tool name Contents of change

Gauge manifold

Pressure is huge and cannot be measured with a conventional

gauge. To prevent erroneous mixing of other refrigerants, the

diameter of each port has been changed.

It is recommended to use a gauge manifold with a high pressure

display range –0.1 to 5.3 MPa and a low pressure display range

–0.1 to 3.8 MPa.

Charging hose To increase pressure resistance, the hose material and base

size were changed.

Vacuum pump A conventional vacuum pump can be used by installing a

vacuum pump adapter.

Gas leakage

detector Special gas leakage detector for HFC refrigerant R410A.

1. SAFETY PRECAUTIONS

• Be sure to read this Manual thoroughly before installation.

• The warnings and precautions indicated in this Manual contain important information

pertaining to your safety. Be sure to observe them.

• Hand this Manual, together with the Operating Manual to the customer.

Request the customer to keep them on hand for future use, such as for relocating or

repairing the unit.

WARNING

This mark indicates procedures which, if improperly performed,

might lead to the death or serious injury of the user.

CAUTION

This mark indicates procedures which, if improperly performed,

might possibly result in personal harm to the user, or damage to

property.

WARNING

Request your dealer or a professional installer to install the indoor unit in accordance

with this Installation Manual. An improperly installed unit can cause serious accidents

such as water leakage, electric shock, or ﬁ re. If the indoor unit is installed in disregard

of the instructions in the Installation Manual, it will void the manufacturer’s warranty.

Do not turn ON the power until all work has been completed. Turning ON the power

before the work is completed can cause serious accidents such as electric shock or ﬁ re

If refrigerant leaks while work is being carried out, ventilate the area. If the refrigerant

comes in contact with a ﬂ ame, it produces a toxic gas.

Installation work must be performed in accordance with national wiring standards by

authorized personnel only.

Except for EMERGENCY, never turn off main as well as sub breaker of the indoor units

during operation. It will cause compressor failure as well as water leakage.

First, stop the indoor unit by operating the control unit, converter or external input

device and then cut the breaker.

Make sure to operate through the control unit, converter or external input device.

When the breaker is designed, locate it at a place where the users cannot start and

stop in the daily work.

Contents

1. SAFETY PRECAUTIONS ..........................................................................................1

2. ABOUT THE UNIT .....................................................................................................1

2.1. Precautions for using the R410A refrigerant .......................................................1

2.2. Special tool for R410A ........................................................................................1

2.3. Accessories ........................................................................................................2

2.4. Optional parts .....................................................................................................2

3. INSTALLATION WORK .............................................................................................2

3.1. Selecting an installation location ........................................................................2

3.2. Installation dimension .........................................................................................3

3.3. Installation the unit ..............................................................................................3

4. PIPE INSTALLATION ................................................................................................4

4.1. Selecting the pipe material .................................................................................4

4.2. Pipe requirement ................................................................................................5

4.3. Flare connection (Pipe connection) ....................................................................5

4.4. Installing heat insulation .....................................................................................6

5. INSTALLING DRAIN HOSE .......................................................................................6

6. ELECTRICAL WIRING ..............................................................................................7

6.1. Wiring system diagram .......................................................................................7

6.2. Connection cable preparation .............................................................................8

6.3. Connection of wiring ...........................................................................................8

7. REMOTE CONTROLLER SETTING .........................................................................9

7.1. Installing the remote controller ...........................................................................9

7.2. Setting the DIP switches .....................................................................................9

8. FUNCTION SETTING..............................................................................................10

8.1. Turning on the power ........................................................................................10

8.2. Function setting ................................................................................................10

8.3. Static pressure characteristic ...........................................................................12

8.4. Special installation methods .............................................................................12

9. FRESH AIR INTAKE ................................................................................................13

10. TEST RUN ...............................................................................................................14

11. CHECK LIST ............................................................................................................14

12. OPTIONAL KIT INSTALLATION (OPTION) .............................................................14

13. CUSTOMER GUIDANCE ........................................................................................15

14. ERROR CODES ......................................................................................................15

INSTALLATION MANUAL

PART NO. 9379127035

INDOOR UNIT (Duct Type)

En-2

2.3. Accessories

WARNING

For installation purposes, be sure to use the parts supplied by the manufacturer or

other prescribed parts.

The use of non-prescribed parts can cause serious accidents such as the unit to fall,

water leakage, electric shock, or ﬁ re.

The following installation parts are furnished. Use them as required.

Keep the Installation Manual in a safe place and do not discard any other accessories

until the installation work has been completed.

Do not discard any accessories needed for installation until the installation work has

been completed.

Name and Shape Q’ty Description

Operating manual

Installation manual

(This book)

Hanger

For suspending the indoor unit

from ceiling

Drain hose insulation

Insulates the drain hose and

vinyl hose

Cable tie (large)

For ﬁ xing the drain hose

Cable tie (small)

For remote controller and re-

mote controller cable binding

Cable tie

For electrical wiring

(22,24 model)

Wire clamper 1

For electrical wiring

(22,24 model)

Remote controller

For air conditioner operation

Remote controller cable

(*1)

For connecting the remote

controller

Screw (M4 × 16)

For installing the remote

controller

Coupler heat

insulation (large) 1

For indoor side pipe joint (gas)

Coupler heat

insulation (small) 1

For indoor side pipe joint

(liquid)

Special nut A

(large ﬂ ange)

For suspending the indoor unit

from ceiling

Special nut B

(small ﬂ ange)

For suspending the indoor unit

from ceiling

(*1) Not supplied for ART series

2.4. Optional parts

Parts name Model No. Application

Wired remote controller UTY-RNN*M For air conditioner operation

Wired remote controller UTY-RVN*M For air conditioner operation

Simple remote controller UTY-RSN*M For air conditioner operation

Remote sensor unit UTY-XSZX Room temperature sensor

External connect kit UTD-ECS5A For control input/output port

Square ﬂ ange UTD-SF045T

Round ﬂ ange UTD-RF204

Long-life ﬁ lter UTD-LF25NA

Drain pump unit

UTZ-PX1NBA

3. INSTALLATION WORK

3.1. Selecting an installation location

Especially, the installation place is very important for the split type air conditioner be-

cause it is very difﬁ cult to move from place to place after the ﬁ rst installation.

WARNING

Select installation locations that can properly support the weight of the indoor. Install

the units securely so that they do not topple or fall.

CAUTION

Do not install the unit in the following areas:

• Area with high salt content, such as at the seaside.

It will deteriorate metal parts, causing the parts to fail or the unit to leak water.

• Area ﬁ lled with mineral oil or containing a large amount of splashed oil or steam,

such as a kitchen.

It will deteriorate plastic parts, causing the parts to fail or the unit to leak water.

• Area that generates substances that adversely affect the equipment, such as

sulfuric gas, chlorine gas, acid, or alkali.

It will cause the copper pipes and brazed joints to corrode, which can cause

refrigerant leakage.

• Area that can cause combustible gas to leak, contains suspended carbon ﬁ bers or

ﬂ ammable dust, or volatile inﬂ ammables such as paint thinner or gasoline.

If gas leaks and settles around the unit, it can cause a ﬁ re.

• Area where animals may urinate on the unit or ammonia may be generated.

Do not use the unit for special purposes, such as storing food, raising animals, growing

plants, or preserving precision devices or art objects.

It can degrade the quality of the preserved or stored objects.

Do not install where there is the danger of combustible gas leakage.

Do not install the unit near a source of heat, steam, or ﬂ ammable gas.

Install the unit where drainage does not cause any trouble.

Install the indoor unit, outdoor unit, power supply cable, transmission cable, and remote

controller cable at least 1 m away from a television or radio receivers. The purpose of

this is to prevent TV reception interference or radio noise.

(Even if they are installed more than 1 m apart, you could still receive noise under

some signal conditions.)

Take precautions to prevent the unit from falling.

Decide the mounting position with the customer as follows:

(1) Install the indoor unit in a location having sufﬁ cient strength to support the weight of

the indoor unit.

(2) The inlet and outlet ports should not be obstructed; the air should be able to blow all

over the room.

Produktspecifikationer

Varumärke:	Fujitsu
Kategori:	Luftkonditionering
Modell:	ARYG30LMLE
Förpackningens vikt:	25000 g
Förpackningens bredd:	120 mm
Djuppackning:	190 mm
Förpackningshöjd:	1400 mm
Typ av förpackning:	Doos