Futaba FP3EG Bruksanvisning
Futaba
Radiostyrning
FP3EG
Läs nedan 📖 manual på svenska för Futaba FP3EG (12 sidor) i kategorin Radiostyrning. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
Futaba
DIGITAL PROPORTIONAL
RADIO CONTROL
Thank you for purchasing a Futaba digital proportional
radio control set.
Please read this manual thoroughly before using your
new
set.
CONTENTS
FEATURES
....................... 1
CONTENTS
AND
RATINGS
............. 2
TRANSMITTER
FP
T3EG
.............. 3
NEUTRAL
LEVER.
.................. 3
CONVERSION
TO SELF-NEUTRAL
........ 3
OPENING THE TRANSMITTER REAR COVER
AND
LOADING
THE
BATTERIES
......... 4
CONVERTING TRANSMITTER TO
NiCd SYSTEM
..................... 4
SERVO REVERSING
................. 5
RECEIVER FP-R3F & SERVO
............
5
RECEIVER, SERVO, & SWITCH HARNESS.
... 6
THROTTLE->RUDDER
MIXING
ADJUSTMENT.
............... 7
RUDDER
DUAL
RATE
................ 8
FPS24&
S27
EXPLODED
VIEWS.
......... 9
IMPORTANT: _______________________________________________________
AN FCC CLASS C LICENSE IS REQUIRED TO OPERATE THIS SYSTEM. WRITE TO THE
FEDERAL COMMUNICATIONS COMMISSION AS LISTED BELOW FOR AN APPLICA-
TION FORM #505.FEDERAL COMMUNICATIONS COMMISSION
P.O.
BOX
1010
Gettysburg, PA 17325
*AII prices and specifications subject change without notice.
•FEATURES
The FP-3EG is a high quality 3 channel, expanded digital proportional radio control set.
The receiver and servo power is a four-battery; 4.8V (Ni-Cad)/6.0V (Dry-Cell). The
transmitter power supply is 9.6V (Ni-Cad)/10.5V (Dry-Cell). 3FG with S24 servos
only comes with Ni-cads for both
TX
and RX. Speed and torque of our servo are the
highest in its class.
Transmitter FP-T3EG
•Rudder dual rate (dual-rate on, dual-rate
off). The desired rudder angle can be se-
lected when dual-rate on.•Servo reversing switch
at rudder and
nd throttle channel.
•Throttle and rudder mixing is adjustable
up to the limit point.
•Three channel transmitter. Third channel
has a click knob and can be conveniently
used as a subchannel.
•Throttle
lever
has
a
neutral
shift
device,
but can be instantly changed to a ratchet
type.
• Semi-open gimbal sticks provide maximum
feel.
• Neck band provided as standard. Com-
fortable operation is possible by hooking
the band around your neck.
•Seven pen-cell battery power supply can
also be changed to Ni-Cad battery (NT-8C).
• Beautiful exterior based on human engine-
ering. Easy-to-use design.
Servo FP-S24
•Highest output torque (4.5kg-cm/62.7oz-in.
or greater) of any servo in its class.
•Output
gear
is
supported
at
the
top
and
bottom by ball bearings for excellent
neutral characteristics, long life,
and
smooth operation.
• Large 20m/m diameter coreless motor fea-
tures high torque near neutral and exact
tracking of even minute rudder movements.
• Indirect drive system extends the life
of
the potentiometer substantially.
• Watertight/dustproof.
Besides the FP-S24, FP-S27, watertight
servo is available with this system.
1
Receiver FP-R3F
•Miniature type, light, weight, rugged con-
struction.
•Crystal is replaceable from the outside.
•3P mini-connectors are compatible with
existing sets.
•3 channel specifications.
•Newly developed receiver use Futaba Cus-
tom I/C, BA633. This I/C is extremely
stable against power supply voltage fluctu-
ations.
•Adjacent frequency interference is mini-
mized by the use of an RF amplifier circuit
and ceramic filter.
Produktspecifikationer
| Varumärke: | Futaba |
| Kategori: | Radiostyrning |
| Modell: | FP3EG |
Behöver du hjälp?
Om du behöver hjälp med Futaba FP3EG ställ en fråga nedan och andra användare kommer att svara dig
Radiostyrning Futaba Manualer
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
Radiostyrning Manualer
- Radiostyrning Graupner
- Radiostyrning Multiplex
- Radiostyrning Hitec
- Radiostyrning Robbe
- Radiostyrning Sanwa
- Radiostyrning Rush
Nyaste Radiostyrning Manualer
17 Oktober 2024
16 Oktober 2024
14 Oktober 2024
15 September 2024
10 September 2024
7 September 2024
5 September 2024
3 September 2024
1 September 2024
30 Augusti 2024