GE CEP90361TBB Bruksanvisning

GE Ugn CEP90361TBB

Läs nedan 📖 manual på svenska för GE CEP90361TBB (16 sidor) i kategorin Ugn. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
Installation
Instructions
BEFORE YOU BEGIN
Read these instructions carefully and completely.
• IMPORTANT — Save these instructions
for local inspector’s use.
• IMPORTANT — Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Product failure due to improper installation is not
covered under the Warranty.
• WARNING This appliance must be properly
grounded.
• ATTENTION INSTALLER
ALL COOKTOPS MUST BE HARD WIRED
(DIRECT WIRED) INTO AN APPROVED
JUNCTION BOX. A “PLUG AND RECEPTACLE”
IS NOT PERMITTED ON THESE PRODUCTS.
• Proper installation is the responsibility of the
installer and product failure due to improper
installation is NOT covered under warranty.
• Consider recycling options for your appliance
packaging material.
30 and 36”
Electric Cooktop - Radiant
Excludes Down-Draft Models
MATERIALS YOU WILL NEED
TOOLS NEEDED
CUTTING THE COUNTERTOP
If you are installing the cooktop in a solid surface
material such as granite, quartz or any other natural
or synthetic solid surface, we recommend that the
cutout be prepared by a professional cabinet or
countertop installer.
Cooktop cutouts in wood or wood-laminate
countertops may be able to be prepared using a
saber saw and electric drill.
PARTS INCLUDED
31-2001161 Rev. 1 10-22 GEA
Wire NutsJunction Box
Saber Saw
Pencil
Safety Glasses
1/8” Drill Bit & Electric or
Hand Drill
Ruler or Straightedge
Phillips Head
Screwdriver
2 Hold Down
Brackets
4 Screws
(WB01X1137)
Foam Tape
WB06K5042
90º or Straight
Squeeze Connector
for 1” Conduit
Questions? Call us at 1.800.432.2737 or visit GEAppliances.com.
In Canada, call 1.800.561.3344 or visit GEAppliances.ca.
231-2001161 Rev. 1
Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR SAFETY
• For Personal Safety, remove house fuse or open
circuit breaker before beginning installation. Failure to
do so could result in serious injury or death.
• Be sure your cooktop is installed properly by a
qualified installer or service technician.
• To eliminate the risk of burns or fire due to reaching
over heated surface elements, cabinet storage
located above the surface units should be avoided. If
cabinet storage space is to be provided, the risk can
be reduced by installing a range hood that projects
horizontally a minimum of 5" beyond the bottom of the
cabinets. Cabinet installation above the cooktop may
be no deeper than 13".
• Make sure the cabinets and wall coverings around the
cooktop can withstand the temperatures (up to 200°F)
generated by the cooktop.
• The cooktop should be easy to reach and lighted with
natural light during the day.
• Always disconnect the electrical service to the cooktop
before repairing or servicing the cooktop. This can
be done by disconnecting the fuse or circuit breaker.
Failure to do this could result in a dangerous or fatal
shock. Know where your main disconnect switch is
located. If you do not know, have your electrician
show you.
ELECTRICAL REQUIREMENTS
This appliance must be supplied with the proper voltage
and frequency, and connected to an individual, properly
grounded branch circuit, protected by a circuit breaker or a
time delay fuse as noted on name plate and the chart below.
We recommend you have the electrical wiring and hookup
of your cooktop connected by a qualified electrician. After
installation, have the electrician show you where your main
cooktop disconnect is located.
Wiring must conform to National Electrical Code. You can
get a copy of the National Electrical Code, ANSI/NFPA No.
70-Latest Edition, by writing to:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
In Canada, wiring must conform to Canadian Electrical
Code (CEC).
The cooktop conduit wiring is approved for copper wire
connection only, and if you have aluminum house wiring,
you must use special UL approved connectors for joining
copper to aluminum.
In Canada, you must use special
CSA approved connectors for joining copper to aluminum.
Installations with Aluminum House Wiring require attention.
See Warning under NOTES: ALUMINUM WIRING, above.
You must use a two-wire, three conductor 208/240 VAC, 60
Hertz electrical system. A white (neutral) wire is not needed
for this unit. The cooktop must be installed in a circuit that
does not exceed 125 VAC
nominal to ground.
Refer to the name plate on
your cooktop for the KW
rating for your cooktop.
Name plate location
KW Rating 240v KW Rating 208V
Recommended
Circuit Size
(Dedicated)
.: .: 20 Amp
4.9 KW - 7.2 KW 4.2 KW - 6.2 KW 30 Amp
7.3 KW - 9.6 KW 6.3 KW - 8.3 KW 40 Amp
9.7 KW - 12.0 KW 8.4 KW - 10.4 KW 50 Amp
NOTE TO ELECTRICIAN: The power leads supplied
with this appliance are UL recognized for connections
to larger gauge household wiring. The insulation of
these leads is rated at temperatures much higher
than the temperature rating of household wiring. The
current carrying capacity of a conductor is governed
by the wire gauge and also the temperature rating of
the insulation around the wire.
NOTE: ALUMINUM WIRING
WARNING INSTALLATIONS WITH ALUMINUM
HOUSE WIRING REQUIRE ATTENTION:
A. Improper connection of Aluminum house wiring
to appliance copper leads can result in an
electrical hazard or re. Use only connectors
designed for joining copper to aluminum and
follow the manufacturer’s recommend procedure
closely.
B. Aluminum to Copper wiring connections must
conform with the National Electrical code, local
codes and industry-accepted wiring practices.
C. If an anti-oxidant compound is added to the
wiring connectors, the compound should be
UL-Listed and suitable for the application
materials, voltage and temperature.
D. Connectors for joining Aluminum and Copper
wiring may be larger in size than standard
connectors. It is recommended to use a double-
gang, or larger, electrical box to enclose the
connectors joining Aluminum and Copper wiring.
31-2001161 Rev. 1 3
Installation Instructions
PRE-INSTALLATION CHECKLIST
WARNING The electrical power to the
cooktop supply line must be shut off while
connections are being made. Failure to do so
could result in serious injury or death.
A When preparing cooktop opening, make sure
the inside of the cabinet and the cooktop do
not interfere with each other. (See section on
preparing the opening.)
B Remove packaging materials and literature
package from the cooktop before beginning
installation.
C Be sure to place all literature, Owner’s Manual,
Installations, etc. in a safe place for future
reference.
D Make sure you have all the tools and materials
you need before starting the installation of the
cooktop.
E Your home must provide the adequate electrical
service needed to safely and properly use
your cooktop. (Refer to section on electrical
requirements.)
F When installing your cooktop in your home, make
sure all local codes and ordinances are followed
exactly as stated.
G Make sure the wall coverings, countertop and
cabinets around the cooktop can withstand heat
(up to 200°F) generated by the cooktop.
H Installing cooktop in combination
with other products.
Both products must be installed according to
their specific product installation instructions.
Consideration must be given the separate
electrical requirements and locations:
Over one or two wall ovens:
• Only certain models may be installed over wall
ovens. The wall oven and cooktop will both
have a label stating which models are approved
in combination.
Over a Microwave:
• See microwave installation instructions for how
to install a microwave under a cooktop. For
vertical dimension of cooktop, see Approximate
Cooktop Dimensions section.
In combination with telescopic downdraft vent:
• See telescopic downdraft vent instructions for
how to install a vent behind a cooktop.
• The countertop must have a deep flat surface
to accommodate the combined installation of
the cooktop and vent.
Over a warming drawer:
• See warming drawer instructions for how to
install a warming drawer under a cooktop. For
vertical dimension of cooktop, see Approximate
Cooktop Dimensions section.
Cooktop
Foam
Packaging
Literature Package
(Located under unit)

Produktspecifikationer

Varumärke: GE
Kategori: Ugn
Modell: CEP90361TBB

Behöver du hjälp?

Om du behöver hjälp med GE CEP90361TBB ställ en fråga nedan och andra användare kommer att svara dig


Ugn GE Manualer

GE

GE JBS08PICWW Bruksanvisning

18 Oktober 2024
GE

GE Profile JP939CHCC Bruksanvisning

17 Oktober 2024
GE

GE JSP26BDWH Bruksanvisning

17 Oktober 2024
GE

GE Profile JBP99SHSS Bruksanvisning

17 Oktober 2024
GE

GE JB710WHWW Bruksanvisning

15 Oktober 2024
GE

GE Adora JBP73HLBB Bruksanvisning

14 Oktober 2024
GE

GE JB700SNSS Bruksanvisning

14 Oktober 2024
GE

GE JGP330SEKSS Bruksanvisning

14 Oktober 2024
GE

GE Profile Performance JS960TBWW Bruksanvisning

11 Oktober 2024
GE

GE JBP62BMWH Bruksanvisning

9 Oktober 2024

Ugn Manualer

Nyaste Ugn Manualer

Taurus

Taurus HM778WHD Bruksanvisning

27 Oktober 2024
Lacanche

Lacanche CITEAUX Bruksanvisning

27 Oktober 2024
JennAir

JennAir JDS1450FS Bruksanvisning

27 Oktober 2024
Orima

Orima ORP-76-IN Bruksanvisning

27 Oktober 2024
Breville

Breville the Handy Hot Plate BHP150 Bruksanvisning

27 Oktober 2024
JennAir

JennAir JGRP436HL Bruksanvisning

27 Oktober 2024
Neff

Neff C17MS22G1 Bruksanvisning

27 Oktober 2024
Pit Boss

Pit Boss BK24 Bruksanvisning

27 Oktober 2024
Guzzanti

Guzzanti GZ-8206 Bruksanvisning

27 Oktober 2024
Avanti

Avanti DE2402SC Bruksanvisning

27 Oktober 2024