Gemini GWS2W Bruksanvisning

Läs nedan 📖 manual på svenska för Gemini GWS2W (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
型號
體重體脂測量儀
A GILMAN GROUP BRAND
3
1. Put the scale on a hard and at oor, avoid to use it on carpet or other soft
surface, otherwise it will inuence the accuracy.
2. To select the measuring unit at the beginning, press the “Unit” button (red) which
is located at the scale’s base, the corresponding unit can be selected on the
LCD screen, i.e. Kilograms (kg), Stone (st) or Pounds (lb). Choose the desired
“Unit” to start the measurement.
3. Stand on the scale directly when using the weight function only.
4. Stand static and put your feet evenly on the glass platform of the scale and wait
for the weight calculating result, the correct weight will be displayed on the LCD
screen.
The automatic switch on function is only activated for weight function only.
You have to input your personal parameters to measure the weight, body fat,
water mass, muscle mass, bone mass, calorie and BMI.



Before using the scale for the rst time, please be familiar with all of the parts.
Read all Instructions and Safeguards carefully.

 




4 precision sensors on the glass platform

Please stand on the scale barefooted, keep your soles of the
feet clean and dry and has a good contact with the precision
sensors.
Please refer to the following operation steps for the result.
LCD Display
Glass platform


Lift the battery cover at the bottom of the scale and
insert 2 pieces of 3V CR2032 lithium batteries.

5
When input the data, please do not stand on the glass platform.

The height setting will ash on the LCD display.
Press “UP(+) or DOWN(-)” button to scroll to your height measurement.
Press “Conrm
 
button to save height information.
The scale is now ready for you to enter your age.

The “Age” icon will ash on the LCD display.
Press “UP(+) or DOWN(-)” button to scroll to your age.
Press “Conrm
 
button to save age information.
After the setting, the display will show 0:0 under the preset user number, it is
ready to weight.
4. Please make sure your feet are dry and clean when stand on the glass platform,
and step on the 4 precision sensors on the glass platform to start weighing, the
display will show your weight, body fat, water mass, muscle mass, bone mass,
calorie and BMI. These data will be displayed respectively for three times. Each
data will display for 2 seconds and then the scale will be switched off automatically.
5. Please remember your User Number which was set in the beginning. When you
use the scale next time, you just need to select your User Number and wait for
about 7 seconds, it will display 0.0 on screen. Then stand on the scale to measure
your weight, body fat, water mass, muscle mass, bone mass, calorie and BMI.
 Please make sure your shoes and socks are taken off before standing on
the scale.

1. Fat percentage error indication is on screen.
2. Fat percentage lower than 5%, will show on screen.
3. Fat percentage higher than 50%, will show on screen.
4. Low battery indication is on screen.

* If you see any of the above error codes, step down from the scale and let
the scale off. Try again after 30 seconds.

Produktspecifikationer

Varumärke: Gemini
Kategori: Inte kategoriserad
Modell: GWS2W

Behöver du hjälp?

Om du behöver hjälp med Gemini GWS2W ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Gemini Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer