Gigabyte AORUS RGB SLI HB Bridge Bruksanvisning
Läs nedan 📖 manual på svenska för Gigabyte AORUS RGB SLI HB Bridge (4 sidor) i kategorin moderkort. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
AORUS RGB SLI HB Bridge
Installation Guide/安裝指南
Hardware Installation/硬體安裝
5-pin LED_C header cable x 1/5-pin LED_C x 1AORUS RGB SLI HB Bridge 插座連接線
Steps:
Attach the AORUS RGB SLI HB Bridge to the SLI connectors
of the two graphics cards as shown. Please note the
orientation of the bridge from the image on the left.
步驟：
將 依圖示安裝至AORUS RGB SLI HB Bridge 2張顯示卡
上方的SLI金手指部份。請注意左圖內的安裝方向。
2-Way SLI Bridge
A 5-pin LED_C header cable included
Compatible with NVIDIA® GeForce GTX 1070 and 1080 series graphics cards
1 slot PCIe spacing
AORUS Logo LED illumination
2-Way SLI 橋接器
內附一條 插座連接線5-pin LED_C
支援 NVIDIA® GeForce GTX 1070 1080 及 系列顯示卡
1 slot PCIe 間距
AORUS Logo LED 亮燈顯示
Product Speci cations/fi產品規格
12WE6-ARSLIBR-10AR
按鈕 功能說明
主要功能切換鈕
(5種功能切換)
• 恒亮模式：可用"下一個"/"上一個"按鈕切換 種顏色20
• 亮度調整：可用"增加"/"減少 按鈕切換" 10段亮度
• 閃爍模式：可用"下一個"/"上一個 按鈕切換 種閃爍效果 單次閃爍、兩" 5 --
次閃爍、呼吸、所有顏色流輪切換、隨機
• 同步模式：與主機板上的 燈色彩LED /行為同步( )註
• 關閉LED
下一個/增加鈕 在恒亮 閃爍模式時可切換顏色/ /閃爍效果，亮度調整模式時可增加亮度
上一個/減少鈕 在恒亮 閃爍模式時可切換顏色/ /閃爍效果，亮度調整模式時可減少亮度
A. Controlling the lighting effects with the buttons on the bridge
A. 使用橋接器按鈕控制 顯示模式LED
Steps:
Enter the operating system and enable SLI mode with the NVIDIA® Control Panel, and you are ready to use
the three buttons on the SLI bridge to control the lighting effects of the LEDs on the bridge.
步驟：
請進入作業系統，使用NVIDIA®控制面板啟動SLI模式，即可使用橋接器上的按鈕控制橋接器燈號。
Button Description
Options Button
(Toggles between 5
functions)
• Static mode: Use the "Next" or "Previous" button to switch between 20 colors.
• Brightness adjustment: Use the "Add" or "Minus" button to switch between 10
levels of brightness.
• fl Flash mode: Use the "Next" or "Previous" button to switch between 5 ashing
effects: Single Flash, Double Flash, Breath, Cycling through all colors,
Random
• Sync mode: Sync the br idge LED c olor and activit y with t hat of the
motherboard's integrated LEDs. (Note)
• Turn the LEDs off.
Next/Add Button Change the bridge LED color (Static mode), switch ashing effects (Flash mode), fl
or increase brightness.
Previous/Minus Button Change the bridge LED color (Static mode), switch ashing effects (Flash mode), fl
or decrease brightness.
Previous/Minus button
上一個/減少鈕
Next/Add button
下一個/增加鈕
Options button
主要功能切換鈕
(Note) The Sync mode is only supported when working with the GIGABYTE RGB Fusion application (see next page).
( ) 註 同步模式只有在使用技嘉 應用程式時才能支援RGB Rusion (見下頁說明)。
There are two ways to control the lighting effects of the LEDs on the bridge:
您可以使用下列方法來控制橋接器上的 顯示模式：LED
B. Controlling the lighting effects with the GIGABYTE RGB Fusion app
B. 使用技嘉 軟體控制橋接器RGB Fusion LED顯示模式
Step 1:
Before powering on the system, plug the white plug of the
included 5-pin LED_C header cable into the corresponding
header on the side of the bridge. Then plug the other end
into the LED_C header on the motherboard (the arrow
marking on the plug must align with the 12V of the header).
Turn on the system and enter the operating system to
enable SLI mode with the NVIDIA® Control Panel.
Step 2:
Refer to the instructions on the previous page and toggle the Options button to select Sync mode.
步驟二：
參考前頁說明，使用主要功能切換鈕將橋接器 顯示模式設定為「同步模式」。LED
Step 3:
Make sure the GIGABYTE APP Center is installed from the motherboard driver disk. On the desktop, click the
App Center icon in the noti cation area to access the App Center. Launch the RGB Fusion application. fi
步驟三：
請確認主機板光碟片裡的技嘉App Center程式已安裝完成。請至桌面的通知區域點選App Center
圖示開啟 程式，並啟動 程式。App Center RGB Fusion
Step 4:
Go to the Advanc ed screen, click the 5-pin LED_C
header icon and use the Calibration option to ne-tune fi
the LED display color. Return to the Basic screen, select
a lighting mode. The LEDs on the bridge will be synced
with the LEDs on the motherboard. The bridge supports
the following lighting modes: Pulse, Color Cycle, Static,
Flash, and Intelligent.
步驟四：
進入「進階模式」設定畫面，點選5-pin LED_C針腳圖
示，再使用「校正」功能調校 顯示色彩。接著可LED
回到「基本模式」設定畫面，可與主機板上的 燈LED
依所選擇的模式同步。橋接器可支援顯示模式包括
呼吸、自動、恆亮、閃爍及監控。
步驟一：
開機前請將橋接器所附的 連接線白色插頭端接5- pin
至橋接器側邊的插座，再將另一端連接至主機板上的
LED_C插座(插頭的箭頭必須對準插座的12V)。開機後
進入作業系統使用NVIDIA®控制面板啟動SLI模式。
•It is recommended that you use the GIGABYTE RGB Fusion app to control the lighting effects of the SLI bridge to
ensure proper operation. In case you are using a third-party app, e.g. the NVIDIA
® LED Visualizer, make sure the LED
effects is set to "On" (or static mode), and note that Flash and Breath modes are not supported with the app.
•為確保橋接器能正常運作，建議您使用技嘉 軟體來控制此橋接器的亮燈模式。若您安RGB Fu sion
裝例如 NVIDIA® LED Visualizer 等第三方的軟體，請確認該軟體有關橋接器 的設定為恆亮模式，LED
並且不支援該軟體的閃爍及呼吸模式。
Produktspecifikationer
| Varumärke: | Gigabyte |
| Kategori: | moderkort |
| Modell: | AORUS RGB SLI HB Bridge |
Behöver du hjälp?
Om du behöver hjälp med Gigabyte AORUS RGB SLI HB Bridge ställ en fråga nedan och andra användare kommer att svara dig
moderkort Gigabyte Manualer
27 Oktober 2024
19 Oktober 2024
18 Oktober 2024
17 Oktober 2024
6 Oktober 2024
6 Oktober 2024
4 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
moderkort Manualer
- moderkort Asus
- moderkort Sharkoon
- moderkort Asrock
- moderkort Supermicro
- moderkort Evga
- moderkort Intel
- moderkort MSI
- moderkort ECS
- moderkort NZXT
- moderkort Foxconn
- moderkort Biostar
Nyaste moderkort Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
21 Oktober 2024
20 Oktober 2024
18 Oktober 2024