Hager EE870 Bruksanvisning
Hager
Rörelsedetektor
EE870
Läs nedan 📖 manual på svenska för Hager EE870 (4 sidor) i kategorin Rörelsedetektor. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
+ 90°/- 30°
+/-80°
Description
Detection zone
Installation
Setting
Shutters
1
2
Connection by PIN system
(4 plug-in pins)
α = 220/360°
The optimal height of installation is 2.5 m.
The detection field must remain free.
2,5 m
LED A LED B
Accessories for corner xing
8 m 16 m Ø 6 m
16 m
4 m
Plate for wall xing
Swivelling detection head
Vertical adjustment
Setting potentiometers
Fixed time
(length of time
of lighting)
Luminosity Sensitivity
(modification
of the range)
Caution!
This device is to be installed only by a professional
electrician tter according to local applicable
installation standards.
Do not plug in or unplug this product when it is live.
DETECTOR 220/360°
EE870 White
EE871 Charcoal
ACCESSORY FOR
CORNER FIXING
EE855 White
EE856 Charcoal
6E7582.C1
6E7582.C
EE87.
izMotion detectors comfort 220/360°
For use in Australia and New Zealand
Operating precautions
In order to obtain optimal detection conditions, it is recommended that the following advice:
- the detection is sensitive to solar radiation and bad weather. Detection performance is optimal up to
35 °C and above 40 °C.
- It is preferable to maintain à distance of 1 m. between a light source and the detector.
When mounting on a box, make sure that you do not distort the wall plate through excessive tightening
of the screws.
Montage
Surface-mounting or ceiling-mounted :
- x the wall plate using the screws provided
- connect the wall plate terminal block (see cabling plans in annex)
- fully insert the detector on the wall plate
- tighten the screws to ensure the product is sealed.
For corner xing, the wall plate is to be xed between the accessory and the detector.
Cable entry (breakable partitions) are possible:
- by the back (box mounting) or by the bottom.
LN S'
60 mm
N
L
S'
Ateha raceways
ref. ATA 12200
or ATA 63000
Wiring and connections (provide installation with xed wiring)
Action Settings Potentiometer
Use Auto settings
(factory) or set by
the remote control
to switch the light
automatically for a
given time.
Auto Settings
Put the Lux potentiometer on
“auto test”.
The settings are predefined:
Lux = o
(operating at night only)
time = 3 min,
sensitivity = max.
Remote control settings
(Manual Settings inhibited).
Automatically switch
on the light for a
defined time.
Installer settings
Control a timer, a bell
etc.
Impuls V
Auto settings are usable with
time = 1s. (cannot be changed)
Test and validate the
detection zone.
Test mode
Move the potentiometer to 2
“auto test”. On this position, the
remote control can be used.
Adjust the sensitivity. Allows setting the range
to avoid disturbance.
“Normal” operation (on/off)
The lighting is activated whenever the level of
luminosity dened by the potentiometer 2 is
judged to be insufcient and a movement is
detected.
After detection, the light stays on for the length
of time predened by the potentiometer 1.
The xed timing is reset after each detection.
Please note: when the potentiometer is on “auto
test”, the settings are predened.
Control by timer
An impulse is generated every 10 s whenever the
level of luminosity is judged to be insufcient and
a movement is detected when the potentiometer
1 is on .V
This pulse mode is not suitable for connections to
power devices (except at low power loads).
Using the remote control (option,
ref. EE806)
The detector receives instructions from the remote
control when the Lux potentiometer is on the “auto
test” position.
If the potentiometer is put on another value, the
local setting resumes.
The LED B of the detector lights up to confirm the
signal with the remote control.
It flashes quickly for 2 s when an instruction is
received and 5 s for a reset.
When an instruction is not authorised, the LED
lights up for 1 s.
The available settings are:
- fixed time
- level of luminosity
- sensitivity
- on / off
- holidays (simulation of presence)
- activation of the detection A.
Testing and validating
the detection zone
Put the potentiometer on Test mode and if 2
necessary, use the shutters to define the detection
zone.
The Test mode is available for 3 min. Every
movement detected switches on the light for 1s.
After 3 min without detection of movement, the
product returns to normal operation.
Limiting the detection zone
You can limit the detection zone by using the
shutters provided or by tilting the head.
Product presentation
and operating principles
This detector allows automatic control of a
light source for a dened length of time when a
movement is detected in the surveillance zone.
The LED A indicates a movement. It is inhibited by
default except in Test mode.
Settings and Test
The detectors have 2 modes of operation:
Fixed time and Control by timer.
Power supply
The detector switches the light on for 40 s.
After 40 s, it activates the Normal mode.
6E7582.C2
6E7582.C3
+ 90°/- 30°
+/-80°
Beschrijving
Detectiezone
Installatie
Instelling
Afdekplaten
1
2
Aansluiting d.m.v. PEN-systeem
(4 insteekbare pennen)
α = 220/360°
De optimale montagehoogte bedraagt 2,5 m.
Het detectieveld moet vrij zijn.
2,5 m
LED A LED B
Toebehoren voor hoekmontage
8 m 16 m Ø 6 m
16 m
4 m
6E7582.C
EE87.
ziBewegingsmelders comfort
220/360°
Wandmontageplaat
Draaibare detectiekop
Verticale instelling
Instelpotentiometers
Lichtsterkte Gevoeligheid
(wijziging van het
bereik)
Tijdvertraging
(verlichtingsduur)
Opgelet!
Het toestel mag alleen door een elektroinstallateur
worden geïnstalleerd volgens de installatienormen
die van toepassing zijn in het land.
De contactpennen van het product niet vast- of
loskoppelen wanneer het onder spanning staat.
220/360°-
BEWEGINGSMELDER
EE870 Wit
EE871 Zwart
TOEBEHOREN VOOR
HOEKMONTAGE
EE855 Wit
EE856 Zwart
Produktspecifikationer
| Varumärke: | Hager |
| Kategori: | Rörelsedetektor |
| Modell: | EE870 |
Behöver du hjälp?
Om du behöver hjälp med Hager EE870 ställ en fråga nedan och andra användare kommer att svara dig
Rörelsedetektor Hager Manualer
31 December 2025
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
Rörelsedetektor Manualer
- Rörelsedetektor Philips
- Rörelsedetektor Honeywell
- Rörelsedetektor Abus
- Rörelsedetektor Alecto
- Rörelsedetektor ACME
- Rörelsedetektor Hikvision
- Rörelsedetektor Nedis
- Rörelsedetektor Yale
- Rörelsedetektor Lucide
- Rörelsedetektor Eminent
- Rörelsedetektor Blaupunkt
- Rörelsedetektor Optex
- Rörelsedetektor Schneider
- Rörelsedetektor Axis
- Rörelsedetektor Theben
- Rörelsedetektor Velleman
- Rörelsedetektor Techly
- Rörelsedetektor Vemer
- Rörelsedetektor Smartwares
- Rörelsedetektor Steren
- Rörelsedetektor Perel
- Rörelsedetektor Steinel
- Rörelsedetektor IFM
- Rörelsedetektor ESYLUX
- Rörelsedetektor Olympia
- Rörelsedetektor Devolo
- Rörelsedetektor Dahua Technology
- Rörelsedetektor Cotech
- Rörelsedetektor Arlo
- Rörelsedetektor Grothe
- Rörelsedetektor Merten
- Rörelsedetektor Goobay
- Rörelsedetektor Massive
- Rörelsedetektor Konig
- Rörelsedetektor Busch-Jaeger
- Rörelsedetektor D-Link
- Rörelsedetektor Swann
- Rörelsedetektor DESQ
- Rörelsedetektor Xavax
- Rörelsedetektor Marmitek
- Rörelsedetektor Orbis
- Rörelsedetektor Jung
- Rörelsedetektor DSC
- Rörelsedetektor HQ
- Rörelsedetektor Fibaro
- Rörelsedetektor Iget
- Rörelsedetektor Nexa
- Rörelsedetektor Satel
- Rörelsedetektor Wentronic
- Rörelsedetektor EQ3
- Rörelsedetektor Homematic IP
- Rörelsedetektor Vernier
- Rörelsedetektor Crestron
- Rörelsedetektor Chuango
- Rörelsedetektor ORNO
- Rörelsedetektor Berker
- Rörelsedetektor Extron
- Rörelsedetektor Maxsa
- Rörelsedetektor Kopp
- Rörelsedetektor Vimar
- Rörelsedetektor Kogan
- Rörelsedetektor XQ-Lite
- Rörelsedetektor Brinno
- Rörelsedetektor Legrand
- Rörelsedetektor Elgato
- Rörelsedetektor Intertechno
- Rörelsedetektor Schwaiger
- Rörelsedetektor Inovonics
- Rörelsedetektor V-Tac
- Rörelsedetektor Bitron
- Rörelsedetektor EQ-3
- Rörelsedetektor InLine
- Rörelsedetektor Suevia
- Rörelsedetektor EtiamPro
- Rörelsedetektor Pentatech
- Rörelsedetektor Joy-it
- Rörelsedetektor RAB
- Rörelsedetektor BEA
- Rörelsedetektor Tellur
- Rörelsedetektor Megatron
- Rörelsedetektor Ledvance
- Rörelsedetektor Gewiss
- Rörelsedetektor ALC
- Rörelsedetektor Avigilon
- Rörelsedetektor GEV
- Rörelsedetektor Pepperl+Fuchs
Nyaste Rörelsedetektor Manualer
9 Januari 2025
30 December 2025
30 December 2025
30 December 2025
27 December 2024
27 December 2024
26 December 2024
17 December 2024
17 December 2024
17 December 2024