Halifax FTHP930 Bruksanvisning

Halifax Fläktkåpa FTHP930

Läs nedan 📖 manual på svenska för Halifax FTHP930 (4 sidor) i kategorin Fläktkåpa. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
Revised 10/2019
Receiving and Storage
Once equipment is received, check for both obvious and hidden damage. If damage is found, record all
necessary informaon on the bill of lading and le a claim with the nal carrier. Check to be sure that
all parts of the shipment, including accessories, are accounted for.
UNPACKING
Verify that all required parts and the correct quanty of each item have been received. If any items are
missing, report shortages to your representave to obtaining missing parts. Somemes it is not possi-
ble that all items for the unit be shipped together due to availability of transportaon and truck space.
Conrmaon of shipment(s) must be limited to only items on the bill of lading. Filters are typically
shipped in the hood, but somemes are shipped on a separate skid in their original packaging. Do not
remove factory packaging or install lters unl just prior to commissioning. Remove all other shipping/
packing materials.
WARNING!!
Installaon of this unit should only be performed by a qualied professional.
Please read the instrucons thoroughly before installing or servicing this equipment.
LISTING
This hood is listed to ANSI UL710 and CAN/ULC S646-10 and built to the “NFPA 96” Naonal Fire
Protecon Associaon Standard
WARRANTY
This equipment is warranted to be free from defects in materials and workmanship, under normal use
and service, for a period of 24 months from date of shipment – See full Installaon Instrucons for
Details.
INSTALLATION
It is necessary to install and operate this unit with the airow (CFM) designed for the size of hood,
lters and installaon based on the informaon provided.
SITE PREPERATION
1. To safely li equipment into the nal installed posion you must make sure the area of installaon
is clear. Make sure you have enough room aer installaon to service unit easily.
2. Verify the locaon that the hood will be installed so there is
nothing to interfere when installing
the unit.
3. Review your plans and specicaons for your project.
4. Conrm and verify the supports will support the weight of the
hood and fan mounted on top of the truck.
5. If installing light xtures
a. Have electrician following wiring diagram as noted in full
Installaon Manual
6. Weld Duct connecon on top of Hood at area which does not
interfere with bracing inside truck
7. Cut hole in Hood at duct connecon – See Figure #1, Item #7
8. To cut the hole properly in the roof of truck – See Figure #1
a. Li hood in the locaon where it will be mounted, ensuring
there is adequate room available to install the hood and all
ductwork to comply with proper clearances from combusble
material (Item # 1)
b. Bring duct in contact with top of truck (Item # 5)
c. Mark locaon of duct on truck roof
d. Lower hood back down
e. Cut hole in roof of truck (Item # 7)
9. Mount Roof Curb with Curb plate on top of truck
(Items # 3 & 4)
10. See aached instrucons for using Concession Hood Bolt Kit to
complete hood aachment
11. Curb Plate securing
a. Cut Curb Plate hole where duct meets plate to ensure ght t
b. Secure Curb Plate to top of Roof Curb
12. Install and secure fan on top of Roof Curb (Item # 2)
13. Wire power to Fan
14. Use Sealant around roof curb and any holes which were made during the installaon process
IMC, NFPA96 and local authories having jurisdicon may call for a minimum clearance (typically
18 inches for type 1, grease rated hoods) between the cooking hood(s), exhaust ducts, and building
materials which are combusble. However, IMC and NFPA96 do outline acceptable clearance
reducon methods; most local jurisdicng authories will accept the clearance reducon methods
approved in the manufacturer’s UL lisng for Type 1, grease rated hoods.

Produktspecifikationer

Varumärke: Halifax
Kategori: Fläktkåpa
Modell: FTHP930

Behöver du hjälp?

Om du behöver hjälp med Halifax FTHP930 ställ en fråga nedan och andra användare kommer att svara dig


Fläktkåpa Halifax Manualer

Halifax

Halifax FTHI740K Bruksanvisning

27 Oktober 2024
Halifax

Halifax LEXHP1848 Bruksanvisning

8 September 2024
Halifax

Halifax LBSHP1223 Bruksanvisning

8 September 2024
Halifax

Halifax HRHP648 Bruksanvisning

7 September 2024
Halifax

Halifax LPSHP1648 Bruksanvisning

4 September 2024
Halifax

Halifax ODHP1236 Bruksanvisning

4 September 2024
Halifax

Halifax FTHI1040A Bruksanvisning

4 September 2024
Halifax

Halifax LEXHP648 Bruksanvisning

4 September 2024
Halifax

Halifax PSPHP1048 Bruksanvisning

4 September 2024
Halifax

Halifax SCHP548 Bruksanvisning

4 September 2024

Fläktkåpa Manualer

Nyaste Fläktkåpa Manualer

Neff

Neff D61MAC1X0B Bruksanvisning

27 Oktober 2024
Klarstein

Klarstein 10033709 Bruksanvisning

27 Oktober 2024
Hoover

Hoover HDTI6500/1X Bruksanvisning

27 Oktober 2024
Heinner

Heinner HTCH-440FS Bruksanvisning

27 Oktober 2024
ATAG

ATAG WG411V Bruksanvisning

27 Oktober 2024
Broan

Broan BKDB136WW Bruksanvisning

27 Oktober 2024
XO

XO R30SC Bruksanvisning

26 Oktober 2024
IKEA

IKEA DATID HW570 Bruksanvisning

24 Oktober 2024
Candy

Candy CDG6MB Bruksanvisning

24 Oktober 2024
Miele

Miele da 219 1 Bruksanvisning

24 Oktober 2024