Havis C-SM-SA Bruksanvisning

Havis Bilsats C-SM-SA

Läs nedan 📖 manual på svenska för Havis C-SM-SA (5 sidor) i kategorin Bilsats. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

C-SM_INST_ -10 9

INSTALL INSTRUCTIONS C-SM SERIES

ANGLED HEAVY DUTY CONSOLE & ACCESSORIES

TOOLS REQUIRED:

Standard socket set w/ 6”extension

Metric socket set w/ 6” extension

Standard wrench set

Metric wrench set

Torx bit set w/ driver

Slide ¼” nuts into extrusion.

This can be done on inside of

console at top of extrusion.

Tunnel Plate (C-TMW-xx)

(Part # varies depending on vehicle type)

Pentex Printer

Mount

( )C-PMS

Console Extension

(C-SM-600, 800 or

1200)

Angled Heavy Duty

Console

(C- - )SM 830 or 1225

Keyboard/Laptop

Platform

( ) C-SM-SA-1

Monitor Platform

(C-SM-MMP)

C-SM_INST_ -10 9

Always!

¾ Read all instructions before installing any Havis, Inc. products.

¾ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

¾ Use hardware provided with install kit

SUB ASSEMBLY:

1. Install Tunnel Mount into vehicle. (See Tunnel Mount

specific install instructions.)

2. Determine desired height of console and console

accessories prior to mounting in vehicle.

INSTALLATION:

1. ADJUST CONSOLE HEIGHT: (See Figure #1)

• To adjust height remove carriage bolts on side

of console.

• Mount necessary accessories to side of console.

(Monitor platform, keyboard/laptop platform,

printer, etc. See instructions below.)

• With all accessories and height determined, re-attach

carriage bolts and nuts to console.

2. ATTACH MONITOR PLATFORM: (See Figure #2)

• Mounting platform attaches to side of console using

supplied carriage bolts and serrated nuts.

• Monitor mounting platform will mount to front row of

holes on console.

• Attach C-UMM-101 and C-MM-XXX brackets to

monitor platform prior to attaching to console.

Note: Prior to mounting accessories to side of Angled Heavy Duty console

be sure to adjust height.

3. ATTACH KEYBOARD/LAPTOP PLATFORM:

(See Figure #3)

• Mounting platform attaches to side of console using supplied

• carriage bolts and serrated nuts.

• When using platform for a keyboard, mount on rear rows

of holes on console.

• When using platform for a laptop, you have the option of using

any row of holes for desired height.

• Attach tilt / swivel, keyboard/laptop mount to swing arm assembly.

RE: C-MD-202, C-KBM-101 (sold separate)

Note: Prior to mounting accessories to side of Angled Heavy Duty console be sure to adjust height.

Height Adjustment

Figure #1

Figure #2

Mounts to sides of

Console

Figure #3

Mounts to sides of

Console

C-SM_INST_ -10 9

4. ATTACH PENTEX PRINTER BRACKET: (See Figure #4)

• Printer bracket attaches to front side of console.

• When mounted properly, printer housing will slide toward passenger side seat.

• Attach to Angled Heavy Duty console using supplied screws and Keps nuts.

5. MOUNT CONSOLE TO TUNNEL PLATE:

• Slide ¼-20 x ¾” bolts into slots of Tunnel Plate.

• Place Angled Heavy Duty console over ¼” bolts.

• Position console and attach to Tunnel using ¼-20 serrated nuts.

6. (C-SM-600, 800, 1200 see Figure 5) ATTACH CONSOLE EXTENSION:

• With Angled Heavy Duty console attached to Tunnel, position and attach 6” console

extension. **A spare plastic end cap is provided in case you choose not to attach

consoles together. Simply peel and stick to console end plate if desired.

• Slide (2) ¼-20 x ¾” hex head bolts into slots of Tunnel Plate.

• Place console extension and bolt down using ¼-20 serrated nuts.

• Connect opposite end-to-end plate of Angled Heavy Duty housing. (Slot to slot).

Adjust height as desired.

• Wire and install control heads and accessories.

Mounts to

Angled Heavy

Duty console

Mounting

Hardware

Figure #4 Figure #5

Tunnel Plate

Hardware

A spare plastic end

cap is provided in

case you choose not

to attach consoles

together

Produktspecifikationer

Varumärke:	Havis
Kategori:	Bilsats
Modell:	C-SM-SA
Färg på produkten:	Zwart
Inbyggd display:	Ja
Vikt:	2000 g
Bredd:	185 mm
Djup:	165 mm
Höjd:	100 mm
Kraftkälla:	AC
Temperatur (min):	150 °C
Certifiering:	CE, WEEE, GS: TÜV Rheinland
Temperatur (max):	450 °C
Displayteknik:	LCD
Antal kanaler:	- kanalen
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 Hz
Bakgrundsbelyst display:	Ja
Värmekraft:	48 W
Inkluderar lödkolv:	Ja