Hikvision DS-2CD2127G2-SU Bruksanvisning

Hikvision övervakningskamera DS-2CD2127G2-SU

Läs nedan 📖 manual på svenska för Hikvision DS-2CD2127G2-SU (132 sidor) i kategorin övervakningskamera. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/132
Network Camera
User Manual
Network Camera User Manual
i
Legal Informaon
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website
( ). hps://www.hikvision.com/
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
Network Camera User Manual
ii
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Network Camera User Manual
iii
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol
Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided,
could result in equipment damage, data loss, performance
degradaon, or unexpected results.
Note
Provides addional informaon to emphasize or supplement
important points of the main text.
Network Camera User Manual
iv
Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulaons
● The device should be used in compliance with local laws, electrical safety regulaons, and re
prevenon regulaons.
Transportaon
● Keep the device in original or similar packaging while transporng it.
Power Supply
● The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and
the Limited Power Source. Refer to the appropriate documentaon for detailed informaon.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect mulple devices to one power adapter, to avoid over-heang or re hazards
caused by overload.
System Security
● The installer and user are responsible for password and security conguraon and its sengs.
Baery
● Improper use or replacement of the baery may result in explosion hazard.
● Replace with the same or equivalent type only. Dispose of used baeries in conformance with
the local codes.
Maintenance
● If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Using Environment
● Make sure the running environment meets the requirement of the device. The operang
temperature shall be -30°C to 60°C (-22°F to 140°F), and the operang humidity shall be 95% or
less, no condensing.
● When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
● Do not expose the device to high electromagnec radiaon or dusty environments.
● For indoor-only device, place it in a dry and well-venlated environment.
● Do not aim the lens at the sun or any other bright light.
Network Camera User Manual
v
Emergency
● If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the
power cable, and contact the service center.
Time Synchronizaon
● Set up camera me manually for the rst me access if the local me is not synchronized with
that of the network. Visit the camera via Web browse/client soware and go to me sengs
interface.
Network Camera User Manual
vi
Contents
Chapter 1 System Requirement .................................................................................................. 1
Chapter 2 Device Acvaon and Accessing ................................................................................. 2
2.1 Acvate the Device via SADP ................................................................................................ 2
2.2 Acvate the Device via Browser ........................................................................................... 2
2.3 Login ....................................................................................................................................... 3
2.3.1 Plug-in Installaon ..................................................................................................... 3
2.3.2 Admin Password Recovery 4........................................................................................
2.3.3 Illegal Login Lock 5........................................................................................................
Chapter 3 Live View .................................................................................................................... 6
3.1 Live View Parameters ............................................................................................................ 6
3.1.1 Enable and Disable Live View .................................................................................... 6
3.1.2 Adjust Aspect Rao .................................................................................................... 6
3.1.3 Live View Stream Type ............................................................................................... 6
3.1.4 Select the Third-Party Plug-in .................................................................................... 6
3.1.5 Light 7............................................................................................................................
3.1.6 Count Pixel .................................................................................................................. 7
3.1.7 Start Digital Zoom 7......................................................................................................
3.1.8 Auxiliary Focus ............................................................................................................ 7
3.1.9 Lens Inializaon 7.......................................................................................................
3.1.10 Quick Set Live View .................................................................................................. 8
3.1.11 Lens Parameters Adjustment................................................................................... 8
3.1.12 Conduct 3D Posioning ............................................................................................ 9
3.2 Set Transmission Parameters................................................................................................ 9
3.3 Set Smooth Streaming ......................................................................................................... 10
Chapter 4 Video and Audio ....................................................................................................... 12
4.1 Video Sengs ...................................................................................................................... 12
4.1.1 Stream Type .............................................................................................................. 12
4.1.2 Video Type ................................................................................................................ 13
4.1.3 Resoluon ................................................................................................................. 13
Network Camera User Manual
vii
4.1.4 Bitrate Type and Max. Bitrate .................................................................................13
4.1.5 Video Quality ............................................................................................................ 13
4.1.6 Frame Rate ...............................................................................................................13
4.1.7 Video Encoding ......................................................................................................... 14
4.1.8 Smoothing................................................................................................................. 15
4.2 ROI ........................................................................................................................................ 16
4.2.1 Set ROI ...................................................................................................................... 16
4.2.2 Set Face Tracking ROI ............................................................................................... 17
4.2.3 Set Target Tracking ROI ............................................................................................ 17
4.2.4 Set License Plate Tracking ROI ................................................................................. 17
4.3 Display Info. on Stream ....................................................................................................... 18
4.4 Audio Sengs ...................................................................................................................... 18
4.4.1 Audio Encoding ......................................................................................................... 18
4.4.2 Audio Input ............................................................................................................... 18
4.4.3 Audio Output ............................................................................................................ 18
4.4.4 Environmental Noise Filter ...................................................................................... 19
4.5 Two-way Audio .................................................................................................................... 19
4.6 Display Sengs ................................................................................................................... 19
4.6.1 Scene Mode .............................................................................................................. 20
4.6.2 Image Parameters Switch ........................................................................................ 23
4.6.3 Video Standard ......................................................................................................... 23
4.6.4 Local Video Output ................................................................................................... 23
4.7 OSD ......................................................................................................................................23
4.8 Set Privacy Mask .................................................................................................................. 24
4.9 Overlay Picture .................................................................................................................... 24
4.10 Set Target Cropping ........................................................................................................... 25
Chapter 5 Video Recording and Picture Capture ........................................................................ 26
5.1 Storage Sengs ................................................................................................................... 26
5.1.1 Set New or Unencrypted Memory Card .................................................................. 26
5.1.2 Set FTP ......................................................................................................................28
5.1.3 Set NAS .....................................................................................................................29
Network Camera User Manual
viii
5.1.4 eMMC Protecon ..................................................................................................... 29
5.1.5 Set Cloud Storage ..................................................................................................... 30
5.2 Video Recording ..................................................................................................................30
5.2.1 Record Automacally ............................................................................................... 30
5.2.2 Record Manually ......................................................................................................32
5.2.3 Set Lite Storage ......................................................................................................... 32
5.2.4 Playback and Download Video ................................................................................ 32
5.3 Capture Conguraon ......................................................................................................... 33
5.3.1 Capture Automacally ............................................................................................. 33
5.3.2 Capture Manually ..................................................................................................... 34
5.3.3 Set Timing Wake ....................................................................................................... 34
5.3.4 View and Download Picture .................................................................................... 34
Chapter 6 Event and Alarm ....................................................................................................... 36
6.1 Basic Event ........................................................................................................................... 36
6.1.1 Set Moon Detecon ............................................................................................... 36
6.1.2 Set Video Tampering Alarm ..................................................................................... 38
6.1.3 Set PIR Alarm ............................................................................................................ 39
6.1.4 Set Excepon Alarm ................................................................................................. 40
6.1.5 Set Alarm Input ........................................................................................................40
6.1.6 Set Video Quality Diagnosis ..................................................................................... 41
6.1.7 Set Vibraon Detecon ............................................................................................ 41
6.2 Smart Event .........................................................................................................................42
6.2.1 Detect Audio Excepon ............................................................................................ 42
6.2.2 Set Defocus Detecon .............................................................................................. 43
6.2.3 Detect Scene Change ................................................................................................ 43
6.2.4 Set Face Detecon .................................................................................................... 43
6.2.5 Set Video Loss ........................................................................................................... 44
6.2.6 Set Intrusion Detecon ............................................................................................ 44
6.2.7 Set Line Crossing Detecon .....................................................................................45
6.2.8 Set Region Entrance Detecon ................................................................................ 46
6.2.9 Set Region Exing Detecon .................................................................................... 47
Network Camera User Manual
ix
6.2.10 Set Unaended Baggage Detecon ...................................................................... 49
6.2.11 Set Object Removal Detecon ............................................................................... 49
6.2.12 Draw Area ............................................................................................................... 51
6.2.13 Set Size Filter .......................................................................................................... 51
Chapter 7 Network Sengs ...................................................................................................... 52
7.1 TCP/IP ..................................................................................................................................52
7.1.1 Mulcast ................................................................................................................... 53
7.1.2 Mulcast Discovery .................................................................................................. 54
7.2 SNMP ...................................................................................................................................54
7.3 Set SRTP ............................................................................................................................... 54
7.4 Port Mapping ....................................................................................................................... 55
7.4.1 Set Auto Port Mapping............................................................................................. 55
7.4.2 Set Manual Port Mapping ........................................................................................ 55
7.4.3 Set Port Mapping on Router .................................................................................... 56
7.5 Port....................................................................................................................................... 57
7.6 Access to Device via Domain Name .................................................................................... 58
7.7 Access to Device via PPPoE Dial Up Connecon ................................................................ 58
7.8 Wireless Dial ........................................................................................................................ 59
7.8.1 Set Wireless Dial ....................................................................................................... 59
7.8.2 Set Allowlist .............................................................................................................. 60
7.9 Wi-Fi ..................................................................................................................................... 60
7.9.1 Connect Device to Wi-Fi ........................................................................................... 61
7.10 Set Network Service .......................................................................................................... 61
7.11 Set Open Network Video Interface................................................................................... 62
7.12 Set ISUP .............................................................................................................................. 63
7.13 Set Alarm Server ................................................................................................................ 63
7.14 Access Camera via Hik-Connect ........................................................................................ 63
7.14.1 Enable Hik-Connect Service on Camera ................................................................64
7.14.2 Set Up Hik-Connect ................................................................................................65
7.14.3 Add Camera to Hik-Connect ..................................................................................66
Network Camera User Manual
x
Chapter 8 Arming Schedule and Alarm Linkage ......................................................................... 67
8.1 Set Arming Schedule ...........................................................................................................67
8.2 Linkage Method Sengs..................................................................................................... 67
8.2.1 Trigger Alarm Output ............................................................................................... 67
8.2.2 FTP/NAS/Memory Card Uploading .........................................................................68
8.2.3 Send Email ................................................................................................................ 69
8.2.4 Nofy Surveillance Center ....................................................................................... 70
8.2.5 Trigger Recording ..................................................................................................... 70
8.2.6 Flashing Light ............................................................................................................ 70
8.2.7 Audible Warning ....................................................................................................... 70
Chapter 9 System and Security ................................................................................................. 72
9.1 View Device Informaon ....................................................................................................72
9.2 Search and Manage Log ...................................................................................................... 72
9.3 Simultaneous Login ............................................................................................................. 72
9.4 Import and Export Conguraon File ................................................................................. 72
9.5 Export Diagnose Informaon .............................................................................................. 72
9.6 Reboot.................................................................................................................................. 73
9.7 Restore and Default ............................................................................................................73
9.8 Upgrade ...............................................................................................................................73
9.9 View Open Source Soware License .................................................................................. 74
9.10 Wiegand ............................................................................................................................. 74
9.11 Metadata ........................................................................................................................... 74
9.12 Time and Date ...................................................................................................................74
9.12.1 Synchronize Time Manually ................................................................................... 74
9.12.2 Set NTP Server ........................................................................................................ 75
9.12.3 Synchronize Time by Satellite ................................................................................ 75
9.12.4 Set DST .................................................................................................................... 75
9.13 Set RS-485 .......................................................................................................................... 76
9.14 Set RS-232 .......................................................................................................................... 76
9.15 Power Consumpon Mode ............................................................................................... 76
9.16 External Device .................................................................................................................. 77
Network Camera User Manual
xi
9.16.1 Supplement Light Sengs ..................................................................................... 77
9.16.2 Heater ..................................................................................................................... 78
9.17 Security .............................................................................................................................. 78
9.17.1 Authencaon........................................................................................................ 78
9.17.2 Set IP Address Filter ............................................................................................... 79
9.17.3 Set HTTPS ................................................................................................................ 80
9.17.4 Set QoS.................................................................................................................... 80
9.17.5 Set IEEE 802.1X ....................................................................................................... 80
9.17.6 Control Timeout Sengs ....................................................................................... 81
9.17.7 Search Security Audit Logs ..................................................................................... 81
9.17.8 Security Reinforcement .........................................................................................81
9.17.9 SSH .......................................................................................................................... 82
9.18 Cercate Management ................................................................................................... 82
9.18.1 Create Self-signed Cercate ................................................................................82
9.18.2 Create Cercate Request ..................................................................................... 82
9.18.3 Import Cercate ................................................................................................... 83
9.18.4 Install Server/Client Cercate ............................................................................. 83
9.18.5 Install CA Cercate ............................................................................................... 83
9.18.6 Enable Cercate Expiraon Alarm ...................................................................... 84
9.19 User and Account .............................................................................................................. 84
9.19.1 Set User Account and Permission .......................................................................... 84
9.19.2 Simultaneous Login ................................................................................................ 85
9.19.3 Online Users ...........................................................................................................85
Chapter 10 Allocate VCA Resource ............................................................................................ 86
10.1 Switch Smart Mode ........................................................................................................... 86
10.2 Face Capture ...................................................................................................................... 87
10.2.1 Set Face Capture ..................................................................................................... 88
10.2.2 Overlay and Capture .............................................................................................. 88
10.2.3 Face Capture Algorithms Parameters .................................................................... 89
10.2.4 Set Shield Region .................................................................................................... 91
10.3 Road Trac ........................................................................................................................ 91
Network Camera User Manual
xii
10.3.1 Set Vehicle Detecon ............................................................................................. 91
10.3.2 Set Mixed-Trac Detecon Rule ........................................................................... 93
10.3.3 Uploading Pictures Sengs ................................................................................... 93
10.3.4 Camera Sengs...................................................................................................... 93
10.3.5 Import or Export Blocklist & Allowlist ................................................................... 94
10.4 Mul-Target-Type Detecon ............................................................................................ 94
10.4.1 Set Mul-Target-Type Detecon Rule ................................................................... 94
10.4.2 Overlay and Capture .............................................................................................. 95
10.4.3 Mul-Target-Type Detecon Algorithm Parameters ............................................ 95
10.4.4 Set Shield Region .................................................................................................... 97
10.5 Face Counng .................................................................................................................... 97
10.5.1 Set Face Counng Detecon Rule .........................................................................97
10.5.2 Overlay and Capture .............................................................................................. 98
10.5.3 Face Counng Algorithm Parameters ...................................................................99
10.5.4 View Face Counng Result ................................................................................... 100
10.6 Queue Management ....................................................................................................... 100
10.6.1 Set Regional People Queuing-Up ......................................................................... 100
10.6.2 Set Waing Time Detecon ................................................................................. 101
10.6.3 Queue Management Stascs ............................................................................102
10.7 Counng ........................................................................................................................... 103
10.7.1 Set Counng ......................................................................................................... 103
10.7.2 View Counng Stascs ......................................................................................104
10.8 Hard Hat Detecon .......................................................................................................... 105
10.8.1 Set Hard Hat Detecon ........................................................................................ 105
10.9 Face Comparison and Modeling .....................................................................................105
10.9.1 Face Comparison .................................................................................................. 106
10.9.2 Face Modeling ...................................................................................................... 108
Chapter 11 Open Plaorm .......................................................................................................... 1
11.1 Set Open Plaorm ............................................................................................................... 1
Network Camera User Manual
xiii
Chapter 12 Smart Display ........................................................................................................... 3
Chapter 13 Set EPTZ ................................................................................................................... 4
13.1 Patrol.................................................................................................................................... 4
13.2 Auto-Tracking ...................................................................................................................... 4
Chapter 14 Paern Linkage 6........................................................................................................
14.1 Set Paern Linkage 6.............................................................................................................
A. Device Command ................................................................................................................... 7
B. Device Communicaon Matrix 8...............................................................................................
Network Camera User Manual
1
Chapter 1 System Requirement
Your computer should meet the requirements for proper vising and operang the product.
Operang System
Microso Windows XP SP1 and above version
CPU
2.0 GHz or higher
RAM
1G or higher
Display
1024×768 resoluon or higher
Web Browser
For the details, see Plug-in Installaon
Network Camera User Manual
2
Chapter 2 Device Acvaon and Accessing
To protect the security and privacy of the user account and data, you should set a login password
to acvate the device when access the device via network.
Note
Refer to the user manual of the soware client for the detailed informaon about the client
soware acvaon.
2.1 Acvate the Device via SADP
Search and acvate the online devices via SADP soware.
Before You Start
Access www.hikvision.com to get SADP soware to install.
Steps
1. Connect the device to network using the network cable.
2. Run SADP soware to search the online devices.
3. Check from the device list, and select device. Device Status Inacve
4. Create and input the new password in the password eld, and conrm the password.
Cauon
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including upper case leers, lower case leers, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, reseng the password monthly or weekly can
beer protect your product.
5. Click . OK
Device Status Acve changes into .
6. Oponal: Change the network parameters of the device in . Modify Network Parameters
2.2 Acvate the Device via Browser
You can access and acvate the device via the browser.
Steps
1. Connect the device to the PC using the network cables.
2. Change the IP address of the PC and device to the same segment.
Network Camera User Manual
3
Note
The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from
192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of
the PC to 192.168.1.100.
3. Input in the browser. 192.168.1.64
4. Set device acvaon password.
Cauon
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
5. Click . OK
6. Input the acvaon password to log in to the device.
7. Oponal: Go to Conguraon → Network to change the IP address of the → Basic → TCP/IP
device to the same segment of your network.
2.3 Login
Log in to the device via Web browser.
2.3.1 Plug-in Installaon
Certain operaon systems and web browser may restrict the display and operaon of the camera
funcon. You should install plug-in or complete certain sengs to ensure normal display and
operaon. For detailed restricted funcon, refer to the actual device.
Operang System
Web Browser
Operaon
Windows
● Internet Explorer 8+
● Google Chrome 57 and
earlier version
● Mozilla Firefox 52 and
earlier version
Follow pop-up prompts to
complete plug-in installaon.
● Google Chrome 57+
● Mozilla Firefox 52+
Click to
download and install plug-in.
Network Camera User Manual
4
Operang System
Web Browser
Operaon
Mac OS
● Google Chrome 57+
● Mozilla Firefox 52+
● Mac Safari 16+
Plug-in installaon is not
required.
Go to Conguraon →
Network Advanced →
Sengs Network Service →
to enable WebSocket or
Websockets for normal view.
Display and operaon of
certain funcons are
restricted. For example,
Playback and Picture are not
available. For detailed
restricted funcon, refer to
the actual device.
Note
The camera only supports Windows and Mac OS system and do not support Linux system.
2.3.2 Admin Password Recovery
If you forget the admin password, you can reset the password by clicking on the Forget Password
login page aer compleng the account security sengs.
You can reset the password by seng the security queson or email.
Note
When you need to reset the password, make sure that the device and the PC are on the same
network segment.
Security Queson
You can set the account security during the acvaon. Or you can go to Conguraon → System
→ User Management Account Security Sengs, click , select the security queson and input your
answer.
You can click and answer the security queson to reset the admin password Forget Password
when access the device via browser.
Email
You can set the account security during the acvaon. Or you can go to Conguraon → System
→ User Management Account Security Sengs, click , input your email address to receive the
vericaon code during the recovering operaon process.
Network Camera User Manual
5
2.3.3 Illegal Login Lock
It helps to improve the security when accessing the device via Internet.
Go to , and enable Conguraon → System → Security → Security Service Enable Illegal Login
Lock Illegal Login Aempt Locking Duraon. and are congurable.
Illegal Login Aempt
When your login aempts with the wrong password reach the set mes, the device is locked.
Locking Duraon
The device releases the lock aer the seng duraon.
Network Camera User Manual
6
Chapter 3 Live View
It introduces the live view parameters, funcon icons and transmission parameters setngs.
3.1 Live View Parameters
The supported funcons vary depending on the model.
3.1.1 Enable and Disable Live View
This funcon is used to quickly enable or disable live view of the channel.
● Click to start the live view.
● Click to stop the live view.
3.1.2 Adjust Aspect Rao
Steps
1. Click . Live View
2. Click to select the aspect rao.
● refers to 4:3 window size.
● refers to 16:9 window size.
● refers to original window size.
● refers to self-adapve window size.
● refers to original rao window size.
3.1.3 Live View Stream Type
Select the live view stream type according to your needs. For the detailed informaon about the
stream type selecon, refer to . Stream Type
3.1.4 Select the Third-Party Plug- in
When the live view cannot display via certain browsers, you can change the plug-in for live view
according to the browser.
Steps
1. Click . Live View
2. Click to select the plug-in.
When you access the device via Internet Explorer, you can select Webcomponents or
QuickTime.When you access the device via the other browsers, you can select Webcomponents,
Network Camera User Manual
7
QuickTime, VLC or MJPEG.
3.1.5 Light
Click to turn on or turn o the illuminator.
3.1.6 Count Pixel
It helps to get the height and width pixel of the selected region in the live view image.
Steps
1. Click to enable the funcon.
2. Drag the mouse on the image to select a desired rectangle area.
The width pixel and height pixel are displayed on the boom of the live view image.
3.1.7 Start Digital Zoom
It helps to see a detailed informaon of any region in the image.
Steps
1. Click to enable the digital zoom.
2. In live view image, drag the mouse to select the desired region.
3. Click in the live view image to back to the original image.
3.1.8 Auxiliary Focus
It is used for motorized device. It can improve the image if the device cannot focus clearly.
For the device that supports ABF, adjust the lens angle, then focus and click ABF buon on the
device. The device can focus clearly.
Click to focus automacally.
Note
● If the device cannot focus with auxiliary focus, you can use , then use auxiliary Lens Inializaon
focus again to make the image clear.
● If auxiliary focus cannot help the device focus clearly, you can use manual focus.
3.1.9 Lens Inializaon
Lens inializaon is used on the device equipped with motorized lens. The funcon can reset lens
when long me zoom or focus results in blurred image. This funcon varies according to dierent
models.
Manual Lens Inializaon
Network Camera User Manual
8
Click to operate lens inializaon.
Auto Lens Inializaon
Go to to enable this funcon. You Conguraon → System → Maintenance → Lens Correcon
can set the arming schedule, and the device will correct lens automacally during the
congured me periods.
3.1.10 Quick Set Live View
It oers a quick setup of PTZ, display sengs, OSD, video/audio and VCA resource sengs on live
view page.
Steps
1. Click to show quick setup page.
2. Set PTZ, display sengs, OSD, video/audio and VCA resource parameters.
– For PTZ sengs, see . Lens Parameters Adjustment
– For display sengs, see . Display Sengs
– For OSD sengs, see . OSD
– For audio and video sengs, see Video and Audio.
– For VCA sengs, see . Allocate VCA Resource
Note
The funcon is only supported by certain models.
3.1.11 Lens Parameters Adjustment
It is used to adjust the lens focus, zoom and iris.
Zoom
● Click , and the lens zooms in.
● Click , and the lens zooms out.
Focus
● Click , then the lens focuses far and the distant object gets clear.
● Click , then the lens focuses near and the nearby object gets clear.
PTZ Speed
Slide to adjust the speed of the pan/lt movement.
Iris
● When the image is too dark, click to enlarge the iris.
● When the image is too bright, click to stop down the iris.
Network Camera User Manual
9
PTZ Lock
PTZ lock means to disable the zoom, focus and PTZ rotaon funcons of the corresponding
channel, so that to reduce the target missing caused by PTZ adjustment.
Go to , check , and click . Conguraon → PTZ Enable PTZ Lock Save
3.1.12 Conduct 3D Posioning
3D posioning is to relocate the selected area to the image center.
Steps
1. Click to enable the funcon.
2. Select a target area in live image.
– Le click on a point on live image: the point is relocated to the center of the live image. With
no zooming in or out eect.
– Hold and drag the mouse to a lower right posion to frame an area on the live: the framed
area is zoomed in and relocated to the center of the live image.
– Hold and drag the mouse to an upper le posion to frame an area on the live: the framed
area is zoomed out and relocated to the center of the live image.
3. Click the buon again to turn o the funcon.
3.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network condions. In dierent
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1. Go to . Conguraon → Local
2. Set the transmission parameters as required.
Protocol
TCP
TCP ensures complete delivery of streaming data and beer video quality, yet the real-me
transmission will be aected. It is suitable for the stable network environment.
UDP
UDP is suitable for the unstable network environment that does not demand high video
uency.
MULTICAST
MULTICAST is suitable for the situaon that there are mulple clients. You should set the
mulcast address for them before selecon.
Network Camera User Manual
10
Note
For detailed informaon about mulcast, refer to . Mulcast
HTTP
HTTP is suitable for the situaon that the third-party needs to get the stream from the
device.
Play Performance
Shortest Delay
The device takes the real-me video image as the priority over the video uency.
Balanced
The device ensures both the real-me video image and the uency.
Fluent
The device takes the video uency as the priority over teal-me. In poor network
environment, the device cannot ensures video uency even the uency is enabled.
Custom
You can set the frame rate manually. In poor network environment, you can reduce the
frame rate to get a uent live view. But the rule informaon may cannot display.
3. Click . OK
3.3 Set Smooth Streaming
It is a funcon to tackle the latency and network congeson caused by unstable network condion,
and keep the live view stream on the web browser or the client soware smooth.
Before You Start
Add the device to your client soware and select NPQ protocol in client soware before
conguring the smooth streaming funcon.
Be sure that the is selected as and the is selected as before Bitrate Type Constant SVC OFF
enabling the funcon. Go to Conguraon → Video/Audio → Video to set the parameters.
Steps
1. Go to the sengs page: Conguraon → Network → Advanced Sengs Smooth Streaming → .
2. Check . Enable Smooth Streaming
3. Select the mode for smooth streaming.
Auto
Network Camera User Manual
11
Resoluon Priority
Error Correcon
4. Save the sengs.
Network Camera User Manual
12
Chapter 4 Video and Audio
This part introduces the configuration of video and audio related parameters.
4.1 Video Settings
This part introduces the settings of video parameters, such as, stream type, video encoding, and
resolution.
Go to setting page: . Configuration → Video/Audio → Video
4.1.1 Stream Type
For device supports more than one stream, you can specify parameters for each stream type.
Main Stream
The stream stands for the best stream performance the device supports. It usually offers the
best resolution and frame rate the device can do. But high resolution and frame rate usually
means larger storage space and higher bandwidth requirements in transmission.
Sub Stream
The stream usually offers comparatively low resolution options, which consumes less bandwidth
and storage space.
Other Streams
Steams other than the main stream and sub stream may also be offered for customized usage.
Set Custom Video
You can set up additional video streams if required. For custom video streams, you can preview
them, but cannot record or play back them.
Steps
Note
● The function is only supported by certain camera models.
● After restoring the device (not restore to default settings), quantity of custom video streams
and their names are kept, but the related parameters are restored.
1. Click to add a stream.
2. Change the stream name as needed.
Network Camera User Manual
13
Note
Up to 32 letters and symbols (except &, <, >, ', or ") are allowed for the stream name.
3. Customize the stream parameters (resolution, frame rate, max. bitrate, video encoding).
4. Optional: Add stream description as needed.
5. Optional: If a custom stream is not needed, click to delete it.
6. Click . Save
4.1.2 Video Type
Select the content (video and audio) that should be contained in the stream.
Video
Only video content is contained in the stream.
Video & Audio
Video content and audio content are contained in the composite stream.
4.1.3 Resolution
Select video resolution according to actual needs. Higher resolution requires higher bandwidth
and storage.
4.1.4 Bitrate Type and Max. Bitrate
Constant Bitrate
It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The
compression speed is fast, but mosaic may occur on the image.
Variable Bitrate
It means that the device automatically adjust the bitrate under the set . The Max. Bitrate
compression speed is slower than that of the constant bitrate. But it guarantees the image
quality of complex scenes.
4.1.5 Video Quality
When is set as Variable, video quality is configurable. Select a video quality according Bitrate Type
to actual needs. Note that higher video quality requires higher bandwidth.
4.1.6 Frame Rate
The frame rate is to describe the frequency at which the video stream is updated and it is
Network Camera User Manual
14
measured by frames per second (fps).
A higher frame rate is advantageous when there is movement in the video stream, as it maintains
image quality throughout. Note that higher frame rate requires higher bandwidth and larger
storage space.
4.1.7 Video Encoding
It stands for the compression standard the device adopts for video encoding.
Note
Available compression standards vary according to device models.
H.264
H.264, also known as MPEG-4 Part 10, Advanced Video Coding, is a compression standard.
Without compressing image quality, it increases compression ratio and reduces the size of video
file than MJPEG or MPEG-4 Part 2.
H.264+
H.264+ is an improved compression coding technology based on H.264. By enabling H.264+, you
can estimate the HDD consumption by its maximum average bitrate. Compared to H.264, H.264+
reduces storage by up to 50% with the same maximum bitrate in most scenes.
When H.264+ is enabled, is configurable. The device gives a recommended Max. Average Bitrate
max. average bitrate by default. You can adjust the parameter to a higher value if the video quality
is less satisfactory. Max. average bitrate should not be higher than max. bitrate.
Note
When H.264+ is enabled, , , and are not configurable. Video Quality I Frame Interval Profile SVC
H.265
H.265, also known as High Efficiency Video Coding (HEVC) and MPEG-H Part 2, is a compression
standard. In comparison to H.264, it offers better video compression at the same resolution, frame
rate and image quality.
H.265+
H.265+ is an improved compression coding technology based on H.265. By enabling H.265+, you
can estimate the HDD consumption by its maximum average bitrate. Compared to H.265, H.265+
reduces storage by up to 50% with the same maximum bitrate in most scenes.
When H.265+ is enabled, is configurable. The device gives a recommended Max. Average Bitrate
max. average bitrate by default. You can adjust the parameter to a higher value if the video quality
Network Camera User Manual
15
is less satisfactory. Max. average bitrate should not be higher than max. bitrate.
Note
When H.265+ is enabled, , , and are not configurable. Video Quality I Frame Interval Profile SVC
I-Frame Interval
I-frame interval defines the number of frames between 2 I-frames.
In H.264 and H.265, an I-frame, or intra frame, is a self-contained frame that can be independently
decoded without any reference to other images. An I-frame consumes more bits than other
frames. Thus, video with more I-frames, in other words, smaller I-frame interval, generates more
steady and reliable data bits while requiring more storage space.
SVC
Scalable Video Coding (SVC) is the name for the Annex G extension of the H.264 or H.265 video
compression standard.
The objective of the SVC standardization has been to enable the encoding of a high-quality video
bitstream that contains one or more subset bitstreams that can themselves be decoded with a
complexity and reconstruction quality similar to that achieved using the existing H.264 or H.265
design with the same quantity of data as in the subset bitstream. The subset bitstream is derived
by dropping packets from the larger bitstream.
SVC enables forward compatibility for older hardware: the same bitstream can be consumed by
basic hardware which can only decode a low-resolution subset, while more advanced hardware
will be able decode high quality video stream.
MPEG4
MPEG4, referring to MPEG-4 Part 2, is a video compression format developed by Moving Picture
Experts Group (MPEG).
MJPEG
Motion JPEG (M-JPEG or MJPEG) is a video compression format in which intraframe coding
technology is used. Images in a MJPEG format is compressed as individual JPEG images.
Profile
This function means that under the same bitrate, the more complex the profile is, the higher the
quality of the image is, and the requirement for network bandwidth is also higher.
4.1.8 Smoothing
It refers to the smoothness of the stream. The higher value of the smoothing is, the better fluency
Network Camera User Manual
16
of the stream will be, though, the video quality may not be so satisfactory. The lower value of the
smoothing is, the higher quality of the stream will be, though it may appear not fluent.
4.2 ROI
ROI (Region of Interest) encoding helps to discriminate the ROI and background information in
video compression. The technology assigns more encoding resource to the region of interest, thus
to increase the quality of the ROI whereas the background information is less focused.
4.2.1 Set ROI
ROI (Region of Interest) encoding helps to assigns more encoding resource to the region of interest,
thus to increase the quality of the ROI whereas the background information is less focused.
Before You Start
Please check the video coding type. ROI is supported when the video coding type is H.264 or
H.265.
Steps
1. Go to . Configuration → Video/Audio → ROI
2. Check . Enable
3. Select . Stream Type
4. Select in to draw ROI region. Region No. Fixed Region
1) Click . Drawing
2) Click and drag the mouse on the view screen to draw the fixed region.
3) Click . Stop Drawing
Note
Select the fixed region that needs to be adjusted and drag the mouse to adjust its position.
5. Input the and . Region Name ROI Level
6. Click . Save
Note
The higher the ROI level is, the clearer the image of the detected region is.
7. Optional: Select other region No. and repeat the above steps if you need to draw multiple fixed
regions.
Network Camera User Manual
17
4.2.2 Set Face Tracking ROI
When the face tracking function is enabled in ROI and the face appears in the live picture, the
image of the face is clearer than that of the surrounding area.
Steps
1. Go to the ROI setting page: Configuration → Video/Audio ROI → .
2. Check . Enable Face Tracking
3. Select in . ROI Level Dynamic Region
Note
ROI level means the image quality enhancing level. The larger the value is, the better the image
quality would be.
4. Click . Save
4.2.3 Set Target Tracking ROI
The moving target is clearer than other areas in live image or recordings after enabling the
function.
Before You Start
Go to to complete the smart tracking settings. Configuration → PTZ → Smart Tracking
Steps
1. Go to . Configuration → Video/Audio → ROI
2. Check . Enable Target Tracking
3. Set for target tracking. The higher the value is, the clearer the target is. ROI Level
4. Click . Save
4.2.4 Set License Plate Tracking ROI
When the license plate tracking ROI function is enabled and the license plate appears in the live
picture, the image of the license plate is clearer than that of the surrounding area.
Steps
1. Go to the ROI setting page: Configuration → Video/Audio ROI → .
2. Check . Enable License Plate Tracking
3. Select in . ROI Level Dynamic Region
Note
ROI level means the image quality enhancing level. The larger the value is, the better the image
quality would be.
4. Click . Save
Network Camera User Manual
18
4.3 Display Info. on Stream
The information of the objects (e.g. human, vehicle, etc.) is marked in the video stream. You can
set rules on the connected rear-end device or client software to detect the events including line
crossing, intrusion, etc.
Steps
1. Go to the setting page: Configuration → Video/Audio → Display Info. on Stream.
2. Check . Enable Dual-VCA
3. Click . Save
4.4 Audio Settings
It is a function to set audio parameters such as audio encoding, environment noise filtering.
Go to the audio settings page: . Configuration → Video/Audio → Audio
4.4.1 Audio Encoding
Select the audio encoding compression of the audio.
4.4.2 Audio Input
Note
● Connect the audio input device as required.
● The audio input display varies with the device models.
LineIn
Set to when the device connects to the Audio Input LineIn
audio input device with the high output power, such as MP3,
synthesizer or active pickup.
MicIn
Set to when the device connects to the Audio Input MicIn
audio input device with the low output power, such as
microphone or passive pickup.
4.4.3 Audio Output
Note
Connect the audio output device as required.
It is a switch of the device audio output. You can adjust the output volume as required. When it is
disabled, all the device audio cannot output. The audio output display varies with the device
Network Camera User Manual
19
modes.
4.4.4 Environmental Noise Filter
Set it as OFF or ON. When the funcon is enabled, the noise in the environment can be ltered to
some extent.
4.5 Two-way Audio
It is used to realize the two-way audio funcon between the monitoring center and the target in
the monitoring screen.
Before You Start
● Make sure the audio input device (pick-up or microphone) and audio output device (speaker)
connected to the device is working properly. Refer to specicaons of audio input and output
devices for device connecon.
● If the device has built-in microphone and speaker, two-way audio funcon can be enabled
directly.
Steps
1. Clic . k Live View
2. Click on the toolbar to enable two-way audio funcon of the camera.
3. Click and select , move the slider to adjust the volume.
4. Click , disable the two-way audio funcon.
4.6 Display Sengs
It oers the parameter sengs to adjust image features.
Go to . Conguraon → Image → Display Sengs
Click to restore sengs. Default
Network Camera User Manual
20
4.6.1 Scene Mode
There are several sets of image parameters predened for dierent installaon environments.
Select a scene according to the actual installaon environment to speed up the display sengs.
Image Adjustment
By adjusng the , , and , the image can be best Brightness Saturaon, Hue Contrast Sharpness
displayed.
Exposure Sengs
Exposure is controlled by the combinaon of iris, shuer, and photo sensibility. You can adjust
image eect by seng exposure parameters.
In manual mode, you need to set Exposure Time Gain Slow Shuer, and .
Focus
It oers opons to adjust the focus mode and the minimum focus distance.
Focus Mode
Auto
The device focuses automacally as the scene changes. If you cannot get a well-focused
image under auto mode, reduce light sources in the image and avoid ashing lights.
Semi-auto
The device focuses once aer the PTZ and lens zooming. If the image is clear, the focus does
not change when the scene changes.
Manual
You can adjust the focus manually on the live view page.
Min. Focus Distance
When the distance between the scene and lens is shorter than the Min. Focus Distance, the lens
does not focus.
Day/Night Switch
Day/Night Switch funcon can provide color images in the day mode and black/white images in
the night mode. Switch mode is congurable.
Day
The image is always in color.
Night
The image is always black/white
Network Camera User Manual
21
Auto
The camera switches between the day mode and the night mode according to the illuminaon
automacally.
Scheduled-Switch
Set the and the to dene the duraon for day mode. Start Time End Time
Triggered by alarm input
Two trigger modes are available: and . For example, if the trigger mode is , the Day Night Night
image turns black and white when the device receives alarm input signal.
Note
Day/Night Switch funcon varies according to models.
Grey Scale
You can choose the range of the as [0-255] or [16-235]. Grey Scale
Rotate
When enabled, the live view will rotate 90 ° counterclockwise. For example, 1280 × 720 is rotated
to 720 × 1280.
Enabling this funcon can change the eecve range of monitoring in the vercal direcon.
Lens Distoron Correcon
For device equipped with motorized lens, image may appear distorted to some extent. Enable this
funcon to correct the distoron.
Note
● This funcon is only supported by certain device equipped with motorized lens.
● The edge of image will be lost if this funcon is enabled.
BLC
If you focus on an object against strong backlight, the object will be too dark to be seen clearly.
BLC (backlight compensaon) compensates light to the object in the front to make it clear. If BLC
mode is set as , you can draw a red rectangle on the live view image as the BLC area. Custom
WDR
The WDR (Wide Dynamic Range) funcon helps the camera provide clear images in environment
with strong illuminaon dierences.
When there are both very bright and very dark areas simultaneously in the eld of view, you can
Network Camera User Manual
22
enable the WDR funcon and set the level. WDR automacally balances the brightness level of the
whole image and provides clear images with more details.
Note
When WDR is enabled, some other funcons may be not supported. Refer to the actual interface
for details.
HLC
When the bright area of the image is over-exposed and the dark area is under-exposed, the HLC
(High Light Compression) funcon can be enabled to weaken the bright area and brighten the dark
area, so as to achieve the light balance of the overall picture.
White Balance
White balance is the white rendion funcon of the camera. It is used to adjust the color
temperature according to the environment.
DNR
Digital Noise Reducon is used to reduce the image noise and improve the image quality. Normal
and modes are selectable. Expert
Normal
Set the DNR level to control the noise reducon degree. The higher level means stronger
reducon degree.
Expert
Set the DNR level for both space DNR and me DNR to control the noise reducon degree. The
higher level means stronger reducon degree.
Defog
You can enable the defog funcon when the environment is foggy and the image is misty. It
enhances the subtle details so that the image appears clearer.
EIS
Increase the stability of video image by using jier compensaon technology.
Mirror
When the live view image is the reverse of the actual scene, this funcon helps to display the
image normally.
Select the mirror mode as needed.
Network Camera User Manual
23
Note
The video recording will be shortly interrupted when the funcon is enabled.
4.6.2 Image Parameters Switch
The device automacally switches image parameters in set me periods.
Go to image parameters switch seng page: Conguraon → Image → Image Parameters Switch,
and set parameters as needed.
Set Switch
Switch the image parameters to the scene automacally in certain me periods.
Steps
1. Check . Enable
2. Select and congure the corresponding me period and the scene.
Note
For the scene conguraon, refer to . Scene Mode
3. Click . Save
4.6.3 Video Standard
Video standard is an ability of a video card or video display device that denes the amount of
colors that are shown and the resoluon. The two most common video standard used are NTSC
and PAL. In NTSC, 30 frames are transmied each second. Each frame is made up of 525 individual
scan lines. In PAL, 25 frames are transmied each second. Each frame is made up of 625 individual
scan lines. Select video signal standard according to the video system in your country.
4.6.4 Local Video Output
If the device is equipped with video output interfaces, such as BNC, CVBS, HDMI, and SDI, you can
preview the live image directly by connecng the device to a monitor screen.
Select the output mode as ON/OFF to control the output.
4.7 OSD
You can customize OSD (On-screen Display) informaon such as device name, me/date, font,
color, and text overlay displayed on video stream.
Go to OSD seng page: Conguraon → Image OSD Sengs → . Set the corresponding
Network Camera User Manual
24
parameters, and click to take eect. Save
Character Set
Select character set for displayed informaon. If Korean is required to displayed on screen, select
EUC- GBKKR. Otherwise, select .
Displayed Information
Set camera name, date, week, and their related display format.
Text Overlay
Set customized overlay text on image.
OSD Parameters
Set OSD parameters, such as , , , and . Display Mode OSD Size Font Color Alignment
4.8 Set Privacy Mask
The funcon blocks certain areas in the live view to protect privacy. No maer how the device
moves, the blocked scene will never be seen.
Steps
1. Go to privacy mask seng page: Configuration → Image → Privacy Mask.
2. Check . Enable Privacy Mask
3. Click . Drag the mouse in the live view to draw a closed area. Draw Area
Drag the corners of
the area
Drag the area
Click Clear All
4. Click . Stop Drawing
5. Click . Save
Note
Up to 4 areas are supported for seng.
4.9 Overlay Picture
Overlay a customized picture on live view.
Before You Start
The picture to overlay has to be in BMP format with 24-bit, and the maximum picture size is 128 ×
Network Camera User Manual
25
128 pixel.
Steps
1. Go to picture overlay seng page: Conguraon → Image → Picture Overlay.
2. Click to select a picture, and click . Browse Upload
The picture with a red rectangle will appear in live view aer successfully uploading.
3. Check . Enable Picture Overlay
4. Drag the picture to adjust its posion.
5. Click . Save
4.10 Set Target Cropping
You can crop the image, transmit and save only the images of the target area to save transmission
bandwidth and storage.
Steps
1. Go to . Conguraon → Video/Audio → Target Cropping
2. Check and set as the . Enable Target Cropping Third Stream Stream Type
Note
Aer enabling target cropping, the third stream resoluon cannot be congured.
3. Select a . Cropping Resoluon
A red frame appears in the live view.
4. Drag the frame to the target area.
5. Click . Save
Note
● Only certain models support target cropping and the funcon varies according to dierent
camera models.
● Some funcons may be disabled aer enabling target cropping.
Network Camera User Manual
26
Chapter 5 Video Recording and Picture Capture
This part introduces the operations of capturing video clips and snapshots, playback, and
downloading captured files.
5.1 Storage Settings
This part introduces the configuration of several common storage paths.
5.1.1 Set New or Unencrypted Memory Card
Before You Start
Insert a new or unencrypted memory card to the device. For detailed installation, refer to Quick
Start Guide of the device.
Steps
1. Go to Configuration → Storage → Storage Management HDD Management → .
2. Select the memory card.
Note
If an button appears, you need to unlock the memory card first. See Unlock Detect Memory
Card Status for details.
3. Click to initialize the memory card. Format
When the of memory card turns from to , the memory card is ready Status Uninitialized Normal
for use.
4. Optional: Encrypt the memory card.
1) Click . Encrypted Format
2) Set the encryption password.
3) Click . OK
When the turns to , the memory card is ready for use. Encryption Status Encrypted
Note
Keep your encryption password properly. Encryption password cannot be found if forgotten.
5. Optional: Define the of the memory card. Input the percentage for storing different Quota
contents according to your needs.
6. Click . Save
Network Camera User Manual
27
Detect Memory Card Status
The device detects the status of Hikvision memory card. You receive notifications when your
memory card is detected abnormal.
Before You Start
The configuration page only appears when a Hikvision memory card is installed to the device.
Steps
1. Go to Configuration → Storage → Storage Management Memory Card Detection → .
2. Click to check the and of your memory card. Status Detection Remaining Lifespan Health Status
Remaining Lifespan
It shows the percentage of the remaining lifespan. The lifespan of a memory card may be
influenced by factors such as its capacity and the bitrate. You need to change the memory
card if the remaining lifespan is not enough.
Health Status
It shows the condition of your memory card. There are three status descriptions: good, bad,
and damaged. You will receive a notification if the health status is anything other than good
when the and are set. Arming Schedule Linkage Method
Note
It is recommended that you change the memory card when the health status is not "good".
3. Click to set the permission of reading and writing to the memory card. R/W Lock
1. Add a LockSelect the as ON. Lock Switch
2. Enter the password.
3. Click Save
Unlock
● If you use the memory card on the device that locks it, unlocking will be done automatically
and no unlocking procedures are required on the part of users.
● If you use the memory card (with a lock) on a different device, you can go to HDD
Management to unlock the memory card manually. Select the memory card, and click
Unlock. Enter the correct password to unlock it.
1. Remove the LockSelect the as OFF. Lock Switch
2. Enter the password in . Password Settings
3. Click . Save
Note
● Only admin user can set the . R/W Lock
● The memory card can only be read and written when it is unlocked.
● If the device, which adds a lock to a memory card, is restored to the factory settings, you can
go to to unlock the memory card. HDD Management
Network Camera User Manual
28
4. Set and . See and Arming Schedule Linkage Method Set Arming Schedule Linkage Method
Settings for details.
5. Click . Save
5.1.2 Set FTP
You can congure the FTP server to save images which are captured by events or a med snapshot
task.
Before You Start
Get the FTP server address rst.
Steps
1. Go to . Conguraon → Network → Advanced Sengs → FTP
2. Congure FTP sengs.
FTP Protocol
FTP and SFTP are selectable. The les uploading is encrypted by using SFTP protocol.
Server Address and Port
The FTP server address and corresponding port.
User Name and Password
The FTP user should have the permission to upload pictures.
If the FTP server supports picture uploading by anonymous users, you can check Anonymous
to hide your device informaon during uploading.
Directory Structure
The saving path of snapshots in the FTP server.
Picture Filing Interval
For beer picture management, you can set the picture ling interval from 1 day to 30 days.
Pictures captured in the same me interval will be saved in one folder named aer the
beginning date and ending date of the me interval.
Picture Name
Set the naming rule for captured pictures. You can choose in the drop-down list to Default
use the default rule, that is, IP address_channel number_capture me_event type.jpg (e.g.,
10.11.37.189_01_20150917094425492_FACE_DETECTION.jpg). Or you can customize it by
adding a to the default naming rule. Custom Prex
3. Check to enable uploading snapshots to the FTP server. Upload Picture
4. Check . Enable Automac Network Replenishment
Network Camera User Manual
29
Note
Upload to FTP/Memory Card/NAS Linkage Method Enable Automac Network in and
Replenishment should be both enabled simultaneously.
5. Click to verify the FTP server. Test
6. Click . Save
5.1.3 Set NAS
Take network server as network disk to store the record les, captured images, etc.
Before You Start
Get the IP address of the network disk rst.
Steps
1. Go to NAS seng page: . Conguraon → Storage → Storage Management → Net HDD
2. Click . Enter the server address and le path for the disk. HDD No.
Server Address
The IP address of the network disk.
File Path
The saving path of network disk les.
Mounng Type
Select le system protocol according to the operaon system.
Enter user name and password of the net HDD to guarantee the security if is SMB/CIFS
selected.
3. Click to check whether the network disk is available. Test
4. Click . Save
5.1.4 eMMC Protecon
It is to automacally stop the use of eMMC as a storage media when its health status is poor.
Note
The eMMC protecon is only supported by certain device models with an eMMC hardware.
Go to Conguraon → System →Maintenance → System Service for the sengs.
eMMC, short for embedded mulmedia card, is an embedded non-volale memory system. It is
able to store the captured images or videos of the device.
The device monitors the eMMC health status and turns o the eMMC when its status is poor.
Otherwise, using a worn-out eMMC may lead to device boot failure.
Network Camera User Manual
30
5.1.5 Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The plaorm requests picture
directly from the cloud for picture and analysis. The funcon is only supported by certain models.
Steps
Cauon
If cloud storage is enabled, the pictures are stored in the cloud storage server preferenally.
1. Go to Conguraon → Storage → Storage Management Cloud Storage → .
2. Check . Enable Cloud Storage
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
User Name and
Password
Picture Storage Pool
ID
4. Click to test the congured sengs. Test
5. Click . Save
5.2 Video Recording
This part introduces the operaons of manual and scheduled recording, playback, and
downloading recorded les.
5.2.1 Record Automacally
This funcon can record video automacally during congured me periods.
Before You Start
Select in event sengs for each record type except . See Trigger Recording Connuous Event and
Alarm for details.
Steps
1. Go to . Conguraon → Storage → Schedule Sengs → Record Schedule
2. Check . Enable
Network Camera User Manual
31
3. Select a record type.
Note
The record type is vary according to dierent models.
Connuous
The video will be recorded connuously according to the schedule.
Moon
When moon detecon is enabled and trigger recording is selected as linkage method, object
movement is recorded.
Alarm
When alarm input is enabled and trigger recording is selected as linkage method, the video is
recorded aer receiving alarm signal from external alarm input device.
Moon | Alarm
Video is recorded when moon is detected or alarm signal is received from the external
alarm input device.
Moon & Alarm
Video is recorded only when moon is detected and alarm signal is received from the
external alarm input device.
Event
The video is recorded when congured event is detected.
4. Set schedule for the selected record type. Refer to for the seng Set Arming Schedule
operaon.
5. Click to set the advanced sengs. Advanced
Overwrite
Enable to overwrite the video records when the storage space is full. Otherwise Overwrite
the camera cannot record new videos.
Pre-record
The me period you set to record before the scheduled me.
Post-record
The me period you set to stop recording aer the scheduled me.
Stream Type
Select the stream type for recording.
Note
When you select the stream type with higher bitrate, the actual me of the pre-record and
post-record may be less than the set value.
Network Camera User Manual
32
Recording Expiraon
The recordings are deleted when they exceed the expired me. The expired me is
congurable. Note that once the recordings are deleted, they can not be recovered.
6. Click . Save
5.2.2 Record Manua lly
Steps
1. Go to . Conguraon → Local
2. Set the and saving path to for recorded les. Record File Size
3. Click . Save
4. Click to start recording. Click to stop recording.
5.2.3 Set Lite Storage
Aer the lite storage is enabled, the frame rate and bitrate of the video stream can be reduced to
lengthen the storage me of the memory card when there is no moving object in the monitoring
scenario.
Steps
1. Go to Conguraon → Storage → Storage Management Lite Storage → .
2. Check and set the level. The higher the level is, the larger the frame rate and bitrate Enable
are, and the shorter the recommended storage me is.
3. Set the storage me. The device automacally calculates the bitrate and oers the
recommended storage me according to the memory card space and level. You are
recommended to set the storage me to the device recommended me.
Note
● If the lite storage is enabled, unformaed memory card will be formaed automacally.
● The displayed available space of the memory card is assigned by default according to
Percentage of Record Storage Storage Management Quota in → → . You can adjust it as
required.
● Only certain device models support the funcon.
5.2.4 Playback and Download Video
You can search, playback and download the videos stored in the local storage or network storage.
Steps
1. Click . Playback
2. Set search condion and click . Search
The matched video les showed on the ming bar.
Network Camera User Manual
33
3. Click to play the video les.
– Click to clip video les.
– Click to play video les in full screen. Press to exit full screen. ESC
Note
Go to , click to change the saving path of clipped video les. Conguraon → Local Save clips to
4. Click on the playback interface to download les.
1) Set search condion and click . Search
2) Select the video les and then click . Download
Note
Go to , click to change the saving path of Conguraon → Local Save downloaded les to
downloaded video les.
5.3 Capture Conguraon
The device can capture the pictures manually or automacally and save them in congured saving
path. You can view and download the snapshots.
5.3.1 Capture Automacally
This funcon can capture pictures automacally during congured me periods.
Before You Start
If event-triggered capture is required, you should congure related linkage methods in event
sengs. Refer to for event sengs. Event and Alarm
Steps
1. Go to Conguraon → Storage → Schedule Sengs → Capture → Capture Parameters.
2. Set the capture type.
Timing
Capture a picture at the congured me interval.
Event-Triggered
Capture a picture when an event is triggered.
3. Set the , , , and . Format Resoluon, Quality Interval Capture Number
4. Refer to for conguring schedule me. Set Arming Schedule
5. Click . Save
Network Camera User Manual
34
5.3.2 Capture Manually
Steps
1. Go to . Conguraon → Local
2. Set the and saving path to for snapshots. Image Format
JPEG
The picture size of this format is comparavely small, which is beer for network
transmission.
BMP
The picture is compressed with good quality.
3. Click . Save
4. Click near the live view or play back window to capture a picture manually.
5.3.3 Set Timing Wake
When the device is sleeping, it will wake up at the set me interval, and capture pictures and
upload them.
Steps
1. Go to , under Conguraon → System → System Sengs → Power Consumpon Mode Sleep
Schedule Sleep Capture Interval, click the me schedule to set .
2. Enter Conguraon → Event → Basic Event → Timing Wake.
3. Check . Enable
4. Select . Capture Types
5. For the linkage method sengs, see . Linkage Method Sengs
6. Click . Save
Result
The device will wake up at the set sleep capture interval, and capture pictures and upload them.
5.3.4 View and Download Picture
You can search, view and download the pictures stored in the local storage or network storage.
Steps
1. Click . Picture
2. Set search condion and click . Search
The matched pictures showed in the le list.
3. Select the pictures then click to download them. Download
Network Camera User Manual
35
Note
Go to , click to change the saving path of Conguraon → Local Save snapshots when playback
pictures.
Network Camera User Manual
36
Chapter 6 Event and Alarm
This part introduces the conguraon of events. The device takes certain response to triggered
alarm.
6.1 Basic Event
6.1.1 Set Moon Detecon
It helps to detect the moving objects in the detecon region and trigger the linkage acons.
Steps
1. Go to Conguraon → Event → Basic Event → Moon Detecon.
2. Check . Enable Moon Detecon
3. Oponal: Highlight to display the moving object in the image in green.
1) Check . Enable Dynamic Analysis for Moon
2) Go to . Conguraon → Local
3) Set to . Rules Enable
4. Select , and set rule region and rule parameters. Conguraon Mode
– For the informaon about normal mode, see . Normal Mode
– For the informaon about expert mode, see . Expert Mode
5. Set the arming schedule and linkage methods. For the informaon about arming schedule
sengs, see . For the informaon about linkage methods, see Set Arming Schedule Linkage
Method Sengs.
6. Click . Save
Expert Mode
You can congure dierent moon detecon parameters for day and night according to the actual
needs.
Steps
1. Select in . Expert Mode Conguraon
2. Set parameters of expert mode.
Scheduled Image Sengs
OFF
Image switch is disabled.
Auto-Switch
The system switches day/night mode automacally according to environment. It displays
Network Camera User Manual
37
colored image at day and black and white image at night.
Scheduled-Switch
The system switches day/night mode according to the schedule. It switches to day mode
during the set periods and switches to night mode during the other periods.
Sensitivity
The higher the value of sensivity is, the more sensive the moon detecon is. If scheduled
image sengs is enabled, the sensivity of day and night can be set separately.
3. Select an and click . Click and drag the mouse on the live image and then release Area Draw Area
the mouse to nish drawing one area.
Figure 6-1 Set Rules
Stop Drawing
Clear All
4. Click . Save
5. Oponal: Repeat above steps to set mulple areas.
Normal Mode
You can set moon detecon parameters according to the device default parameters.
Steps
1. Select normal mode in . Configuration
2. Set the sensivity of normal mode. The higher the value of sensivity is, the more sensive the
moon detecon is. If the sensivity is set to , moon detecon and dynamic analysis do not 0
take eect.
3. Click . Click and drag the mouse on the live video, then release the mouse to nsh Draw Area
drawing one area.

Produktspecifikationer

Varumärke: Hikvision
Kategori: övervakningskamera
Modell: DS-2CD2127G2-SU

Behöver du hjälp?

Om du behöver hjälp med Hikvision DS-2CD2127G2-SU ställ en fråga nedan och andra användare kommer att svara dig


övervakningskamera Hikvision Manualer

Hikvision

Hikvision DS-2CE56C0T-IRPF Bruksanvisning

5 April 2025
Hikvision

Hikvision DS-2CE10DF8T-FSLN Bruksanvisning

5 April 2025
Hikvision

Hikvision DS-2CD2141G1 Bruksanvisning

5 April 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025
Hikvision

Hikvision THC-T127-PTLTS Bruksanvisning

7 Januari 2025
Hikvision

Hikvision DS-2CE16U0T-LF Bruksanvisning

19 December 2024
Hikvision

Hikvision DS-2CE10KF3T-LSYE Bruksanvisning

19 December 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Technaxx

Technaxx TX-192 Bruksanvisning

28 Januari 2025
Bosch

Bosch AutoDome 800 Bruksanvisning

25 Januari 2025
Wisenet

Wisenet XNV-8080R Bruksanvisning

25 Januari 2025
Philips

Philips B120E Bruksanvisning

16 Januari 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025
Speco Technologies

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025
ZKTeco

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025
Speco Technologies

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025
TP Link

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025
Lorex

Lorex LNZ43P4A Bruksanvisning

8 Januari 2025