Hikvision DS-2CD2742FWD-IZS Bruksanvisning

Hikvision övervakningskamera DS-2CD2742FWD-IZS

Läs nedan 📖 manual på svenska för Hikvision DS-2CD2742FWD-IZS (165 sidor) i kategorin övervakningskamera. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/165

User Manual of Network Camera

User Manual

UD.6L0201D1919A01

Network Camera

User Manual of Network Camera

User Manual

Any and all information, including, among others, wordings, pictures, graphs are the

properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries

(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be

“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of Hikvision. Unless

otherwise stipulated, Hikvision does not make any warranties, guarantees or

representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Network Camera (V5.3.0).

The Manual includes instructions for using and managing the product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

ﬁrmware updates or other reasons. Please ﬁnd the latest version in the company

website ( ). http://overseas.hikvision.com/en/

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of

Hikvision in various jurisdictions. Other trademarks and logos mentioned below are

the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,

User Manual of Network Camera

FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF

THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN

CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT

IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE

LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS

PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the

limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance

User Manual of Network Camera

This device meets the CAN ICES-3 (A)/NMB- A) standards requirements. 3(

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are

neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are

neglected.

Warnings llow these safeguards to Fo

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings:

 Please adopt the power adapter which can meet the safety extra low voltage

(SELV) standard. And source with 12 V or 24 VDC AC (depending on models)

according to the IEC60950-1 and Limited Power Source standard.

 To reduce the risk of ﬁre or electrical shock, do not expose this product to rain or

moisture.

 This installation should be made by a qualiﬁed service person and should conform

to all the local codes.

 Please install blackouts equipment into the power supply circuit for convenient

supply interruption.

 Please make sure that the ceiling can support more than 50(N) Newton gravities if

the camera is ﬁxed to the ceiling.

 If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the camera yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

User Manual of Network Camera

Cautions:

 Make sure the power supply voltage is correct before using the camera.

 Do not drop the camera or subject it to physical shock.

 Do not touch sensor modules with ﬁngers. If cleaning is necessary, use a clean

cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an

extended period of time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera lens at the strong light such as sun or incandescent lamp.

The strong light can cause fatal damage to the camera.

 The sensor may be burned out by a laser beam, so when any laser equipment is

being used, make sure that the surface of the sensor not be exposed to the laser

beam.

 Do not place the camera in extremely hot, cold temperatures (the operating

temperature should be between -30°C ~ 60°C, or -40°C ~ 60°C if the camera

model has an “H” in its suffix), dusty or damp environment, and do not expose it

to high electromagnetic radiation.

 To avoid heat accumulation, good ventilation is required for a proper operating

environment.

 Keep the camera away from water and any liquid.

 While shipping, the camera should be packed in its original packing.

 Improper use or replacement of the battery may result in hazard of explosion.

Please use the manufacturer recommended battery type.

Notes:

For the camera supports IR, you are required to pay attention to the following

precautions to prevent IR reﬂection:

 Dust or grease on the dome cover will cause IR reﬂection. Please do not remove

the dome cover ﬁlm until the installation is ﬁnished. If there is dust or grease on

the dome cover, clean the dome cover with clean soft cloth and isopropyl alcohol.

 Make certain the installation location does not have reﬂective surfaces of objects

too close to the camera. The IR light from the camera may reﬂect back into the

lens causing reﬂection.

 The foam ring around the lens must be seated ﬂush against the inner surface of

the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera

body so that the foam ring and the dome cover are attached seamlessly.

User Manual of Network Camera

Chapter 2 Network Connection

Note:

 You shall acknowledge that the use of the product with Internet access might be

under network security risks. For avoidance of any network attacks and

information leakage, please strengthen your own protection. If the product does

not work properly, please contact with your dealer or the nearest service center.

 To ensure the network security of the network camera, we recommend you to

have the network camera assessed and maintained termly. You can contact us if

you need such service.

Before you start:

 If you want to set the network camera via LAN (Local Area Network), please a

refer to Section 2.1 Setting the Network Camera over the LAN.

 If you want to set the network camera via WAN (Wide Area Network), please a

refer to Section 2.2 Setting the Network Camera over the WAN.

2.1 Setting the Network Camera over the LAN

Purpose:

To view and conﬁgure the camera via LAN, you need to connect the network a

camera in the same subnet with your computer, and install the SADP or iVMS-4200

software to search and change the IP of the network camera.

Note: For the detailed introduction of SADP, please refer to Appendix 1.

2.1.1 Wiring over the LAN

The following ﬁgures show the two ways of cable connection of network camera a

and computer: a

Purpose:

 To test the network camera, you can directly connect the network camera to the

computer with a network cable as shown in Figure 2-1.

User Manual of Network Camera

 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a

router.

Figure 2-1 Connecting Directly

Figure 2-2 Connecting via a Switch or Router a

2.1.2 Activating the Camera

You are required to activate the camera ﬁrst by setting a strong password for it before

you can use the camera.

Activation via Web Browser, Activation via SADP, and Activation via Client Software

are all supported.

 Activation via Web Browser

Steps:

1. Power on the camera, and connect the camera to the network.

2. Input the IP address into the address bar of the web browser, and click Enter to

enter the activation interface.

Notes:

 The default IP address of the camera is 192.168.1.64.

 For the camera enables the DHCP by default, you need to activate the camera

via SADP software. Please refer to the following chapter for Activation via SADP.

User Manual of Network Camera

Figure 2-4 SADP Interface

3. Create a password and input the password in the password field, and confirm the

password.

STRONG PASSWORD RECOMMENDED– We highly recommend

you create a strong password of your own choosing (using a minimum

of 8 characters, including upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product.

And we recommend you reset your password regularly, especially in the

high security system, resetting the password monthly or weekly can

better protect your product.

4. Click to save the password. OK

You can check whether the activation is completed on the popup window. If activation

failed, please make sure that the password meets the requirement and try again.

5. Change the device IP address to the same subnet with your computer by either

modifying the IP address manually or checking the checkbox of Enable DHCP.

User Manual of Network Camera

Figure 2-5 Modify the IP Address

6. Input the password and click the button to activate your IP address Save

modiﬁcation.

 Activation via Client Software

The client software is versatile video management software for multiple kinds of

devices.

Get the client software from the supplied disk or the oﬀicial website, and install the

software according to the prompts. Follow the steps to activate the camera.

Steps:

1. Run the client software and the control panel of the software pops up, as shown in

the ﬁgure below.

User Manual of Network Camera

Figure 2-6 Control Panel

2. Click the icon to enter the Device Management interface, as Device Management

shown in the ﬁgure below.

Figure 2-7 Device Management Interface

User Manual of Network Camera

3. Check the device status from the device list, and select an inactive device.

4. Click the button to pop up the Activation interface. Activate

5. Create a password and input the password in the password ﬁeld, and conﬁrm the

password.

STRONG PASSWORD RECOMMENDED– We highly recommend

you create a strong password of your own choosing (using a minimum of

8 characters, including upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product.

We recommend you reset your password regularly, especially in the high

security system, resetting the password monthly or weekly can better

protect your product.

Figure 2-8 Activation Interface (Client Software)

6. Click button to start activation. OK

7. Click the Modify Netinfo button to pop up the Network Parameter Modiﬁcation

interface, as shown in the ﬁgure below.

User Manual of Network Camera

2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2

for detailed IP address conﬁguration of the network camera.

3. Save the static IP in the router.

4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary

according to the diﬀerent routers. Please call the router manufacturer for

assistance with port mapping.

Note: Refer to Appendix 2 for detailed information about port mapping.

5. Visit the network camera through a web browser or the client software over the

internet.

Figure 2-10 Accessing the Camera through Router with Static IP

 Connecting the network camera with static IP directly

You can also save the static IP in the camera and directly connect it to the internet

without using a route Refer to Section 2.1.2 for detailed IP address conﬁguration of r.

the network camera.

Figure 2-11 Accessing the Camera with Static IP Directly

2.2.2 Dynamic IP Connection

Before you start:

Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect

the network camera a modem or a router. to

 Connecting the network camera via a router

Steps:

User Manual of Network Camera

6. Install the plug-in before viewing the live video and operating the camera. Please

follow the installation prompts to install the plug- . in

Figure 3-2 Download and Install Plug- in

Figure 3-3 Install Plug-in (1)

Figure 3-4 Install Plug-in (2)

Note: You may have to close the web browser to install the plug-in. Please reopen the

User Manual of Network Camera

web browser and log in again after installing the plug-in.

3.2 Accessing by Client Software

The product CD contains the iVMS-4200 client software. You can view the live video

and manage the camera with the software.

Follow the installation prompts to install the software. The control panel and live view

interface of iVMS-4200 client software are shown as below.

Figure 3-5 iVMS-4200 Control Panel

User Manual of Network Camera

Figure 3-6 iVMS-4200 Main View

Note: For detailed information about the software, please refer to the user manual of

the iVMS-4200.

User Manual of Network Camera

4. Check the checkbox to select the and the Network mode as Manage, Security

mode of the network is automatically shown when you select the wireless

network, please don’t change it manually.

Note: These parameters are exactly identical with those of the router.

5. Enter the key to connect the wireless network. The key should be that of the

wireless network connection you set on the router.

Wireless Connection in Ad-hoc Mode

If you choose the Ad-hoc mode, you don’t need to connect the wireless camera via a

router. The scenario is the same as you connect the camera and the PC directly with a

network cable.

Steps:

1. Choose Ad-hoc mode.

Figure 4-3 -Fi Setting- Wi Ad-hoc

2. Customize a SSID for the camera.

3. Choose the Security Mode of the wireless connection.

Figure 4-4 Security Mode- Ad-hoc Mode

4. able the wireless connection function for your PC. En

5. On the PC side, search the network and you can see the SSID of the camera

listed.

User Manual of Network Camera

Figure 5-4 Setting a Preset

2. Use the PTZ control buttons to move the lens the desired position. to

• Pan the camera to the right or left.

• Tilt the camera up or down.

• Zoom in or out.

• Refocus the lens.

3. Click to ﬁnish the setting of the current preset.

4. You can click to delete the preset.

Note: Up to 16 presets can be conﬁgured for the Network Mini PT Camera.

 Calling a Preset:

This feature enables the camera to point to a speciﬁed preset scene manually or when

an event takes place.

For the deﬁned preset, you can call it at any time to the desired preset scene.

In the PTZ control panel, select a deﬁned preset from the list and click to call the

preset.

Or you can place the mouse on the presets interface, and call the preset by typing the

preset No. to call the corresponding presets.

Figure 5-5 Calling a Preset

User Manual of Network Camera

5.4.3 Setting / Calling a Patrol

Note:

No less than 2 presets have to be conﬁgured before you set a patrol.

Steps:

1. Click to enter the patrol conﬁguration interface.

2. Select a path No., and click to add the conﬁgured presets.

3. Select the preset, and input the patrol duration and patrol speed.

4. Click OK to save the ﬁrst preset.

5. Follow the steps above to add the other presets.

Figure 5-6 Add Patrol Path

6. Click to save a patrol.

7. Click to start the patrol, and click to stop it.

8. (Optional) Click to delete a patrol.

Produktspecifikationer

Varumärke:	Hikvision
Kategori:	övervakningskamera
Modell:	DS-2CD2742FWD-IZS

Behöver du hjälp?

Om du behöver hjälp med Hikvision DS-2CD2742FWD-IZS ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

övervakningskamera Hikvision Manualer

Hikvision DS-2CE56C0T-IRPF Bruksanvisning

5 April 2025

Hikvision DS-2CE10DF8T-FSLN Bruksanvisning

5 April 2025

Hikvision DS-2CD2141G1 Bruksanvisning

5 April 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025

Hikvision THC-T127-PTLTS Bruksanvisning

7 Januari 2025

Hikvision DS-2CE16U0T-LF Bruksanvisning

19 December 2024

Hikvision DS-2CE10KF3T-LSYE Bruksanvisning

19 December 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Technaxx TX-192 Bruksanvisning

28 Januari 2025

Bosch AutoDome 800 Bruksanvisning

25 Januari 2025

Wisenet XNV-8080R Bruksanvisning

25 Januari 2025

Philips B120E Bruksanvisning

16 Januari 2025

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025

Lorex LNZ43P4A Bruksanvisning

8 Januari 2025