Hikvision DS-2CE12DF0T-LFS Bruksanvisning

Hikvision övervakningskamera DS-2CE12DF0T-LFS

Läs nedan 📖 manual på svenska för Hikvision DS-2CE12DF0T-LFS (29 sidor) i kategorin övervakningskamera. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/29
2MP Color Smart Hybrid Vu
Light Audio Fixed
B let & Turret Cameraul
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS-2CE10DF0T-LFS
DS-2CE10DF0T-L SPF
Type CameraII
DS-2CE12DF0T-LFS
Type III Camera
DS-2CE70DF0T-L SPF
Type IV Camera
DS-2CE70DF0T-L SMF
Type V Camera
DS-2CE72DF0T-LFS
This manual may contain several technical mistakes or
prinng errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or update
the products or procedures described in the manual.
010 004 20230322
Iniaves on the Use of Video Products
Thank you for choosing Hikvision products.
Technology aects every aspect of our life. As a high-tech
company, we are increasingly aware of the role
technology plays in improving business efciency and
quality of life, but at the same me, the potenal harm of
its improper usage. For example, video products are
capable of recording real, complete and clear images. This
provides a high value in retrospect and preserving real-
me facts. However, it may also result in the infringement
of a third party’s legitimate rights and interests if
improper distribuon, use and/or processing of video
data takes place. With the philosophy of “Technology for
the Good”, Hikvision requests that every end user of
video technology and video products shall comply with all
the applicable laws and regulaons, as well as ethical
customs, aiming to jointly create a beer community.
Please read the following initiaves carefully:
1. Everyone has a reasonable expectaon of privacy,
and the installaon of video products should not be
in conict with this reasonable expectation.
Therefore, a warning noce shall be given in a
reasonable and eecve manner and clarify the
monitoring range, when installing video products in
public areas. For non-public areas, a third party’s
rights and interests shall be evaluated when
installing video products, including but not limited
to, installing video products only aer obtaining the
consent of the stakeholders, and not installing
highly-invisible video products.
2. The purpose of video products is to record real
acvies within a specic time and space and under
specic condions. Therefore, every user shall rst
reasonably dene his/her own rights in such specic
scope, in order to avoid infringing on a third pa ’rty s
portraits, privacy or other legimate rights.
3. During the use of video products, video image data
derived from real scenes will connue to be
generated, including a large amount of biological
data (such as facial images), and the data could be
further applied or reprocessed. Video products
themselves could not disnguish good from bad
regarding how to use the data based solely on the
images captured by the video products. The result
of data usage depends on the method and purpose
of use of the data controllers. Therefore, data
controllers shall not only comply with all the
applicable laws and regulations and other
normave requirements, but also respect
internaonal norms, social morality, good morals,
common practices and other non-mandatory
requirements, and respect individual privacy,
portrait and other rights and interests.
4. The rights, values and other demands of various
stakeholders should always be considered when
processing video data that is connuously
generated by video products. In this regard, product
security and data security are extremely crucial.
Therefore, every end user and data controller, shall
undertake all reasonable and necessary measures
to ensure data security and avoid data leakage,
improper disclosure and improper use, including
but not limited to, seing up access control,
selecng a suitable network environment (the
Internet or Intranet) where video products are
connected, establishing and constantly opmizing
network security.
Video products have made great contribuons to the
improvement of social security around the world, and we
believe that these products will also play an acve role in
more aspects of social life. Any abuse of video products in
violaon of human rights or leading to criminal acvies
are contrary to the original intent of technological
innovaon and product development. Therefore, each
user shall establish an evaluaon and tracking mechanism
of their product applicaon to ensure that every product
is used in a proper and reasonable manner and with good
faith.
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd.
All rights reserved.
About this Manual
The Manual includes instrucons for using and managing
the Product. Pictures, charts, images and all other
informaon hereina are for descripon and er
explanaon only. The informaon contained in the
Manual is subject to change, without noce, due to
rmware updates or other reasons. Please find the latest
version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance
of professionals trained in supporng the Product.
Trademarks
and other Hikvision’s trademarks and
logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the
properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS AND “WITH ALL FAULTS AND ERRORS”. ”
HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT
BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE
USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY RISKS, AND
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER
ATTACK, VIRUS INFECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH
ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU
ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,
OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED
END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Informaon
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European standards
listed under the Direcve 2014/30/EU (EMCD), Direcve
2001/95/EC (GPSD) Direcve 2011/65/EU (RoHS)and .
20 2/1 19/EU (WEEE directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecon
points. For more informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collection point. For
more informaon, see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
Warning
This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instrucon
These instrucons are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precauon measure is divided into “Warnings” and
“Cauons”.
Warnings: Serious injury or death may occur if any of the
warnings are neglected.
Cauons: Injury or equipment damage may occur if any
of the cauons are neglected.
Warnings
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauons Follow these
precauons to prevent
potenal injury or
material damage.
In the use of the device, you must be in strict
compliance with the electrical safety regulations of the
naon and region.
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950-1 IEC62368-1 and
standard. Refer to technical specicaons for detailed
informaon.
Do not connect mulple devices to one power adapter
to avoid over-heang or a re hazard caused by
overload.
Make sure that the plug isrmly connected to the
power socket.
Make sure that the device is rmly xed if wall
mounng or ceiling mounng is adopted.
If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cord, and
then contact the service center.
Never aempt to disassemble the camera by
unprofessional personal.
Cauons
Do not drop the camera or subject it to physical shock.
Do not touch senor modules with ngers.
Do not place the camera in extremely hot, cold (the
operang temperature shall be -40°C to 60°C), dusty or
damp locaons, and do not expose it to high
electromagnetic radiation.
If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
Do not aim the camera at the sun or extra bright places.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnec
radiaon or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulaon, good ventilaon is
required for the operang environment.
Keep the camera away from liquid while in use for non-
water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
The beam of the light at the distance of 200 mm is
classied as Risk Group 1 (RG1). Possible hazardous
opcal radiaon emitted from this product.
DO NOT stare at operang light source. May be harmful
to the eyes.
Wear appropriate eye protecon turn on the or
supplement light only at a safe distance (0.3 or in m)
the area that is not directly exposed to the light when
installing or maintaining the device.
Mark Descripon
Table 0-1 Mark Description
Mark
1 Introducon
1.1 Product Features
The main features are as follows:
High performance CMOS sensor
OSD menu with congurable parameters
24-hour color image
Smart light
3-axis adjustment
1.2 Overview
1.2.1 Overview of Type I Camera
Power Cord
Video Cable
Switch Buon
Bracket
Main Body
Lens
Microphone
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch buon for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS
1.2.2 Overview of Type Camera II
Power Cord
Video Cable
Switch Buon
Bracket
Main Body
Lens
Microphone
Figure 1-2 Overview of Type II Camera
Note:
Press and hold the switch buon for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.3 Overview of Type III Camera
DC12VIN
Video Cable
Switch Buon
Power Cord
Base
Gang Box
Enclosure
Main Body
Microphone
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch buon for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.4 Overview of Type Camera IV
Enclosure
Base
Set Screw
Main Body
Video Cable
Switch Buon
Power Cord
DC12VIN
Microphone
Figure 1-4 Overview of Type IV Camera
Note:
Press and hold the switch buon for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.5 Overview of Type V Camera
Enclosure
Base
Gang Box
Main
Body
Power Cord
Switch Buon
Video Cable
Microphone
Figure 1-5 Overview of Type V Camera
Note:
Press and hold the switch buon for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
2 Installaon
Before you start
Make sure that the device in the package is in good
condion and all the assembly parts are included.
Make sure that all the related equipment is power-o
during the installaon.
Check the specicaon of the products for the
installaon environment.
Check whether the power supply is matched with your
power output to avoid damage.
Make sure the wall is strong enough to withstand three
mes the weight of the camera and the mount.
If the product does not funcon properly, contact your
dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installaon of Type I Camera
2.1.1 Ceiling/Wall Mounng
Before you start:
Ceiling mounng and wall mounng are similar. Following
steps take ceiling mounng as an example.
Steps:
Figure 2-4 Drill Template for Juncon Box
3. (Oponal) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the juncon box.
5. Align the screw holes of the camera with those on the
juncon box cover. Aach the camera to the juncon
box with three PM4 screws. cover × 10
Figure 2-5 Attach Camera Junction Box C to over
6. Secure the juncon box body on the wall with three
PA4 × screws (supplied).25
Figure 2-6 Secure Juncon Box on Wall
7. Route the cables through the boom cable hole or
side cable hole of the juncon box and connect the
cables.
8. Fix the juncon box cover its body with three PM3on
× L6 screws that come with the juncon box16 .
Figure 2-7 Fix Juncon Box Cover on I ts
Body
9. Repeat steps 6 7 of to 2.1.1 Ceiling/Wall Mounting to
adjust the angle and nish the installation.
2.1.3 Wall Mounng with Wall Mount
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Take apart the wall mount.
Main Body
Cover
Figure 2-8 Take Apart Wall Mount
2. Paste the drill template (supplied) to the place where
you want to install the camera.
3. Drill the screw holes with a 5.5 mm drill and insert the
supplied wall plugs.
Figure 2-9 Drill Templa for Wall Mountte
4. Attach the main body of the wall mount to the wall
and secure it with three PA4 × 25 screws (supplied).
Figure 2-10 Secure Main Body to Wall
5. (Oponal) Drill the cable hole, when the cables are
routed through the wall.
6. Secure the camera to the cover of the wall mount with
three PM4 × 13 screws and three M4 screws.
PM4 × 13 screw
M screw4
Figure 2-11 Secure Camera to Wall Mount Cover
7. Route the cables through the cable hole of the wall
mount and connect the cables.
8. Insert one end of the wall mount cover diagonally into
the wall mount body, and then snap the other end of
the cover upward on the body.
Step 1
Step 2
Main Body
Cover
Figure 2-12 Secure Cover to Body
9. Lock the cover to the body with one PA3 × 8 screw.
Figure 2-13 Lock Cover to Body
10. Repeat steps 6 to 7 of 2.1.1 Ceiling/Wall Mounng to
adjust the angle and nish the installation.
2.2 Installaon of Type II Camera
2.2.1 Ceiling/Wall Mounng
Before you start:
Ceiling mounng and wall mounng are similar. Following
steps take ceiling mounng as an example.
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Oponal) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Screw
Hole Screw
Hole
Screw
Hole
template
Cable
Hole
Figure 2-14 Drill Template
3. (Oponal) Drill the cable hole, when the cables are
routed through the ceiling.
4. Align the screw holes in the bracket to the ceiling, and
secure the camera with three PA4 × 25 screws
(supplied).
Figure 2-15 Secure Camera to Ceiling
5. Connect the power cord and video cable.
6. Power on the camera to check whether the image on
the monitor is goen from the opmum angle. If not,
adjust the camera according to the figure below.
Rotaon Position
[0° to 360°] Tilt Position
[0° to 180°]
Pan Position
[0° to 360°]
Trim Ring
Screw
Thumbscrew
Figure 2-16 3-Axis Adjustment
1). Loosen the trim ring to adjust the pan posion [0°
to 360°].
2). Loosen the thumbscrew to adjust the lt posion
[0° 180°].to
3). Loosen the screw to adjust the rotaon posion
[0° 360°].to
7. Tighten the trim ring and screws to nish the
installaon.
2.2.2 Ceiling/Wall Mounng With Juncon Box
For installaon with juncon box, refers to 2.1.2
Ceiling/Wall Mounting with Juncon Box.
2.2.3 Wall Mounng With Wall Mount
For installaon with wall mount, refers to 2.1.3 Wall
Mounting with Wall Mount.
2.3 Installaon of Type III Camera
2.3.1 Ceiling/Wall Mounng
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Oponal) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Figure 2-17 Drill Template
3. Attach the gang box to the ceiling and secure it with
three PA4 × 25 screws (supplied).
Figure 2- Aach Gang Box to Ceiling 18
4. Fit the camera to the gang box. on
Figure 2- Fit Camera onto Gang Box 19
5. Turn the camera clockwise unl it snaps into the gang
box.
Figure 2- Snap Camera into Gang Box 20
6. Connect the power cord and video cable.
7. Power on the camera to check whether the image on
the monitor is gotten from the opmum angle. If not,
adjust the camera according to the figure below.
Rotaon Poson
[0° to 360°]
Figure 2- 3-Axis Adjustment 21
1). Rotate the enclosure to adjust the pan posion [0°
to 360°].
2). Move the main body up and down to adjust the
tilt posion [0° to 75°].
3). Rotate the main body to adjust the rotaon
posion [0° 360°].to
2.3.2 Ceiling/Wall Mounng with Junction Box
Before you start:
You need to purchase a juncon box in advance.
Steps:
1. Loosen screws to take apart the juncon box.
2. Paste the drill template for juncon box to the place
where you want to install the camera.
3. (Oponal) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Figure 2-22 Drill Template for Juncon Box
4. (Oponal) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the juncon box body on the ceiling with three
PA4 × 25 screws that come with the junction box.
Figure 2- Secure Juncon Box Body 23
6. Route the cables through the boom cable hole or
the side cable hole of the juncon box.
7. Combine the juncon box cover with its body and
secure it with three PM3 × 13 screws.
Type II Wall Mount
Steps:
1. Take apart the wall mount.
Main Body
Cover
Figure 2-29 Take Apart Wall Mount
2. Paste the drill template (supplied) to the place where
you want to install the camera.
3. Drill the screw holes with a 5.5 mm drill and insert the
supplied wall plugs.
Figure 2-30 Drill Template for Wall Mount
4. Attach the main body of the wall mount to the wall
and secure it with three PA4 × 25 screws (supplied).
Figure 2-31 Secure Main Body to Wall
5. (Oponal) Drill the cable hole, when the cables are
routed through the wall.
6. Secure the camera to the cover of the wall mount with
three PM4 × 13 screws and three M4 screws.
PM 4 × 13 screw
M screw4
Figure 2-32 Secure Camera to Wall Mount Cover
7. Route the cables through the cable hole of the wall
mount and connect the cables.
8. Insert one end of the wall mount cover diagonally into
the wall mount body, and then snap the other end of
the cover upward on the body.
Figure 2-37 Secure Base to Ceiling
6. Align the screw hole with the triangle mark to install
the camera back to the base and secure . it
Triangle
Mark
Figure 2- Install Camera Back 38
7. Connect the power cord and video cable.
8. Power on the camera to check whether the image on
the monitor is gotten from the opmum angle. If not,
adjust the camera according to the figure below.
Rotation Posion
[0° to °]360
Tilt Position
[0° to °]75
Pan Posion
[0°to °]360
Figure 2- 3-Axis Adjustment 39
1). Rotate the enclosure to adjust the pan posion [0°
to 360°].
2). Move the main body up and down to adjust the
tilt posion [0° to 75°].
3). Rotate the main body to adjust the rotaon
posion [0° 360°].to
9. Tighten the set screw to nish the installaon.
Note:
If you need to adjust the angle aer installaon,
loosen the set screw rst and then repeat step 8 to 9.
Set Screw
Figure 2- Loosen the Set Screw 40
2.4.2 Ceiling/Wall Mounng with Junction Box
Before you start:
You need to purchase a juncon box in advance.
Figure 2-45 Finish Installaon
2.4.3 Wall Mounng with Wall Mount
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you want
to install the wall mount.
2. Use four M6 expansion bolts to x the wall mount
onto the wall.
Figure 2- Fix Wall Mount 46
3. Loosen the set screw.
4. Rotate the camera to align the triangle mark with the
screw hole, and disassemble the camera.
Triangle
Mark
Figure 2- Dissemble Camera 47
5. Use M4 × 10 screws to x the base onto the wall
mount.
Figure 2- Fix the Base onto the Wall Mount 48
6. Repeat steps 6 to 9 of 2.4.1 Ceiling/Wall Mounng to
adjust the angle and nish the installation.

Produktspecifikationer

Varumärke: Hikvision
Kategori: övervakningskamera
Modell: DS-2CE12DF0T-LFS

Behöver du hjälp?

Om du behöver hjälp med Hikvision DS-2CE12DF0T-LFS ställ en fråga nedan och andra användare kommer att svara dig


övervakningskamera Hikvision Manualer

Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025
Hikvision

Hikvision THC-T127-PTLTS Bruksanvisning

7 Januari 2025
Hikvision

Hikvision DS-2CE16U0T-LF Bruksanvisning

19 December 2024
Hikvision

Hikvision DS-2CE10KF3T-LSYE Bruksanvisning

19 December 2024
Hikvision

Hikvision DS-2CE10KF3T-LS Bruksanvisning

19 December 2024
Hikvision

Hikvision DS-2CE76U0T-LMF Bruksanvisning

19 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LSYE Bruksanvisning

19 December 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Philips

Philips B120E Bruksanvisning

16 Januari 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025
Speco Technologies

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025
ZKTeco

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025
Speco Technologies

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025
TP Link

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025
Lorex

Lorex LNZ43P4A Bruksanvisning

8 Januari 2025
Lorex

Lorex C221NA Bruksanvisning

8 Januari 2025
Lorex

Lorex C221NC Bruksanvisning

8 Januari 2025
Kguard

Kguard QRT-501 Bruksanvisning

7 Januari 2025