Hikvision DS-2CE16C2T-IT1 Bruksanvisning

Hikvision övervakningskamera DS-2CE16C2T-IT1

Läs nedan 📖 manual på svenska för Hikvision DS-2CE16C2T-IT1 (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

TVI Bullet &Turret Camera

User Manual

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual may contain several technical

incorrect places or printing errors, and the content

is subject to change without notice. The updates

will be added to the new version of this manual.

We will readily improve or update the products or

procedures described in the manual.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

0100001050912

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/E C (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

High performance CM OS sensor and high

resolution bring high-quality image;

Low illumination;

Support auto white balance, auto gain control,

electronic shutter control;

Unit transmission control;

Advanced 3-axis design meets different

installation requirements;

Adopt EXIR LED.

1 Introduction

1.1 Product Features

1.2 Overview

UD.6L0201D2097A01

2012/19/E U (W EEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/E C, the EM C Directive 2004/108/EC ,

the RoH S Directive 2011/65/E U.

1.2.1 Overview of Type I Camera

TURBO HD

Type

Type I

Model

DS-2CE16C XT-IT

1.2.2 Overview of Type II Camera

Type II DS-2CE16C XT-ITX

DS-2CE56C XT-ITX

Privacy Notice

Surveillance laws vary by jurisdiction. Check all

relevant laws in your jurisdiction before using this

product for surveillance purposes to ensure that

your use of this product conforms.

1.2.3 Overview of Type III Camera

Type II I

2 Installation

Before you start:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

Industry Canada ICES-003 Compliance

This device meets the CAN I CE S-3 (A)/NMB-3(A)

standards requirements.

TVI Cable

Power Cable

Camera Bracket

IR LED

Lens

Camera

Figure -1 Overview of Type1 I Camera

Camera

Enclosure

Mounting Base

TVI Cable

Power Cable

Figure 1-3 Overview of Type III Camera

Figure 1-2 Overview of Type II Camera

This manual is applicable to the models below (X

indicates certain character(s), e.g.: DS-2CE16C XT-

ITX can b DS-2C E16C0T-IT DS-2C E16C0T-IT

e P/ M M)

3.Connect the corresponding power cable and

video cable.

4.Fix the camera to the ceiling with the supplied

fixing screws.

Figure 2-2 Fix the Camera to the Ceiling

Figure 2-1 The Drill Template

Steps:

1.Drill the screw holes in the ceiling according

to the supplied drill template, as shown in

Figure 2-1.

2.Hammer the supplied expansion screws into the

screw holes.

2.1 Installation of Type I & Type II

Camera

l The installation of Type I and Type I I cameras are

the same, here we take the installation of Type I

.camera as an example

l Type I and Type II cameras support wall-mounting,

ceiling-mounting, and gang box installation

methods.

2.1.1 Ceiling Mounting

Cable Hole

Template

Screw Hole

3-F 4(0.157")

Screw Hole

5. Adjust the surveillance angle by loosening the 3

adjusting screws.

6. Tighten the fixing screws and the fixing ring to

fix the camera.

2.1.2 Wall Mounting

Steps:

1.Drill the screw holes in the wall according to the

supplied drill template, as shown in Figure 2-1.

2.Hammer the supplied expansion screws into the

screw holes.

3.Connect the corresponding power cable and

video cable.

4.Fix the camera to the wall with the supplied screws.

Figure 2-3 Fix the Camera to the Wall

5. Adjust the surveillance angle by loosening the 3

adjusting screws.

6. Tighten the fixing screws and the fixing ring to

fix the camera.

2.1.3 Installation with Gang Box

Steps:

1.Attach the supplied drill template to the ceiling/

wall according , as shown in Figure 2-4.

Figure 2-4 Drill Template with Gang Box

2.Take apart the gang box and fix the camera to the

cover of the gang box with the supplied 3 PM4

screws.

Figure 2-5 Fix the Camera with Gang Box Cover

Figure 2-6 Fix the Gang Box to the Wall/Ceiling

3.Drill the screw holes in the ceiling/wall according

to the supplied drill template.

4.Hammer the supplied 3 expansion screws into the

screw holes.

Figure 2-7 Fix the Camera to Gang Box

5.Connect the corresponding power cable and

video cable.

6.Fix the camera to the ceiling with the supplied

fixing screws.

Figure 2-8 Adjust the Surveillance Angle

7.Loosen the screws and trim ring to adjust the

surveillance angle.

8. Fix the camera by tightening the screws and trim

ring.

2.2 Installation of Type III Camera

Screw Hole

1.Drill the screw holes in the ceiling according to the

supplied drill template, as shown in Figure 2-9.

2.Hammer the supplied expansion screws into the

screw holes.

Steps:

Figure 2-9 The Drill Template

3.Fix the mounting base to the ceiling with 2 PA4

screws, as shown in Figure 2-10.

Figure 2-10 Fix the Mounting Base to the Ceiling

4.Connect the corresponding power cable and

video cable.

5.Secure the camera to the mounting base.

6.Adjust the camera according to the figure below

to get an optimum angle.

360°

0-75°

Figure 2-11 3-axis Adjustment

2.2.2 Wall Mounting

2.2.1 Ceiling Mounting

Bracket Plate

1. Install the wall mounting bracket onto the wall,

as shown in Figure 2-12.

2.Fix the bracket plate onto the bracket with the

supplied screws, as shown in Figure 2-12.

Steps:

Figure 2-12 Install the Bracket and Mounting Base

3. Install the mounting base onto the bracket plate

with 2 M4 screws, as shown in Figure 2-13.

Figure 2-10 Fix the Camera with the Bracket

M4 Screw

Mounting Base

Bracket Plate

Figure 2-13 Install Mounting Base

4.Connect the corresponding power cable and

video cable.

5.Secure the camera to the mounting base.

6.Adjust the camera according to Figure 2-11 to

get an optimum angle.

Produktspecifikationer

Varumärke:	Hikvision
Kategori:	övervakningskamera
Modell:	DS-2CE16C2T-IT1
Färg på produkten:	Black, Wood colour
Bredd:	17.2 mm
Djup:	38.9 mm
Höjd:	355.6 mm
Snäll:	Rekrail
Husmaterial:	Hout
Certifiering:	Greenguard
Hållbarhetscertifikat:	RoHS
Antal per paket:	1 stuk(s)
Para:	14 "
Rackkapacitet:	8U
Harmoniserad systemkod (HS):	85389099