Hikvision DS-2CE16E8T-IT3F Bruksanvisning

Hikvision övervakningskamera DS-2CE16E8T-IT3F

Läs nedan 📖 manual på svenska för Hikvision DS-2CE16E8T-IT3F (16 sidor) i kategorin övervakningskamera. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

TURBO HD

H8T Series Bullet Camera

User Manual

Thank you for purchasing our product. If there are any

quesons, or requests, do not hesitate to contact the

dealer.

This manual applies to the models below:

Type

Model

Type I Camera

DS- -2CE16H8T ITF

Type CameraII

DS- - 2CE16H8T IT1F

DS- - 2CE16H8T IT3F

DS- - 2CE16H8T IT5F

This manual may contain several technical incorrect

places or prinng errors, and the content is subject to

change without noce. The updates will be added to

the new version of this manual. We will readily improve

or update the products or procedures described in the

manual.

0100001080730

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

FCC compliance: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protecon

against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful interference to

radio communicaons. Operaon of this equipment in a

residenal area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules.

Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operaon.

EU Conformity Statement

This product and if applicable the - -

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Direcve

20 /3 U, the EMC Direcve 201 30/EU.14 5/E 4/

20 2/1 19/EU (WEEE direcve): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new

equipment, or dispose of it at designated collecon

points. For more informaon see: www.recyclethis.info.

2006/66/EC (battery directive): This

product contains a baery that cannot be

disposed of as unsorted municipal waste in

the European Union. See the product

documentaon for specic baery

informaon. The baery is marked with this symbol,

which may include leering to indicate cadmium (Cd),

lead (Pb), or mercury (Hg). For proper recycling, return

the baery to your supplier or to a designated

collecon point. For more informaon see:

www.recyclethis.info.

Industry Canada ICES 003 Compliance-

This device meets the CAN ICES 3 (A)/NMB 3(A) - -

standards requirements.

Warning

This is a class A product. In a domesc environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

Safety Instrucon

These instrucons are intended to ensure that user can

use the product correctly to avoid danger or property

loss.

The precauon measure is divided into “Warnings” and

“Cauons”.

Warnings: Serious injury or death may occur if any of

the warnings are neglected.

Cauons: Injury or equipment damage may occur if any

of the cauons are neglected.

Warnings

 In the use of the device, you must be in strict

compliance with the electrical safety regulaons of

the naon and region.

 Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12

VDC according to the IEC60950 1 standard. Refer to -

technical specicaons for detailed informaon.

 Do not connect mulple devices to one power

adapter to avoid over heang or a re hazard caused -

by overload.

 Make sure that the plug is rmly connected to the

power socket.

 Make sure that the device is rmly xed if wall

mounng or ceiling mounng is adopted.

 If smoke, odor or noise rise from the device, turn o

the power at once and unplug the power cord, and

then contact the service center.

 Never aempt to disassemble the camera by

unprofessional personal.

Cauons

 Do not drop the camera or subject it to physical

shock.

 Do not place the camera in extremely hot, cold (the

operang temperature shall be °C to 60°C), dusty -40

or damp locaons, and do not expose it to high

electromagnec radiaon.

 Do not touch senor modules with ngers.

 If cleaning is necessary, use clean cloth with a bit of

ethanol and wipe it gently.

 Do not aim the camera at the sun or extra bright

places.

 The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that

the surface of sensor will not be exposed to the laser

beam.

 Do not expose the device to high electromagnec

radiaon or extremely hot, cold, dusty or damp

environment.

 To avoid heat accumulaon, good venlaon is

required for the operang environment.

Warnings Follow

these safeguards to

prevent serious injury

or death.

Cauons Follow these

precauons to prevent

potenal injury or

material damage.

Produktspecifikationer

Varumärke:	Hikvision
Kategori:	övervakningskamera
Modell:	DS-2CE16E8T-IT3F
Färg på produkten:	Zwart
Bredd:	482.6 mm
Djup:	412.75 mm
Höjd:	44.45 mm
Förpackningens vikt:	5170 g
Förpackningens bredd:	635 mm
Djuppackning:	660.4 mm
Förpackningshöjd:	127 mm
Snäll:	Ladeblok
Husmaterial:	Staal
Maximal viktkapacitet:	23 kg
Certifiering:	Greenguard
Hållbarhetscertifikat:	RoHS
Antal per paket:	1 stuk(s)
Rackkapacitet:	1U
Harmoniserad systemkod (HS):	85389099
Installationsdjup (max):	520.7 mm
Installationsdjup (min):	393.7 mm