Hisense HWFY1014 Bruksanvisning

Läs nedan 📖 manual på svenska för Hisense HWFY1014 (7 sidor) i kategorin tvättmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
3
ensure
Important: Transport bolts which are not removed can cause damage to
the appliance.
Screw off all transportation bolts for approx. 30mm with wrench following the
direction of arrow shown (not fully screw it off).
Push four transportation bolts on horizontal direction inward and loose
transportation bolt.
30
2. Remove transport bolts
Double sided tape
Right-angle impression
Before installing the noise-reduction bottom
plate, align and paste the acoustic absorption
wool with and along the right-angle impression
on bottom plate (this procedure is unnecessary
for some of the models without acoustic
absorption wool).
Remove surface paper on
double sided tape at four sides
of the bottom plate.
Incline the machine to an angle of 40° and let
the side with right-angle notch face towards
front of the washing machine, as shown in the
figure. Insert the side with oblique-angle notch
between two foot screws at back of the
washing machine completely in place. Then,
install the bottom plate and ensure that it
contacts with bottom of the washing machine
closely.
Press the double sided tape
on four sides manually to
secure the noise-reduction
palte to the machine body
firmly.
B:
If the water inlet hose is not already installed, it must be screwed to the
appliance.The blue marked hose is only for cold water. Depending on the model,
the hot water hose marked with red should also be connected, for models having
dual inlets.
5 Connect the water supply inlet hose.
Pump
6

Produktspecifikationer

Varumärke: Hisense
Kategori: tvättmaskin
Modell: HWFY1014

Behöver du hjälp?

Om du behöver hjälp med Hisense HWFY1014 ställ en fråga nedan och andra användare kommer att svara dig




tvättmaskin Hisense Manualer

tvättmaskin Manualer

Nyaste tvättmaskin Manualer