Hitachi C 5YC Bruksanvisning

Hitachi Sågmaskin C 5YC

Läs nedan 📖 manual på svenska för Hitachi C 5YC (12 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

Dustless Circular Saw

Model C 5YC

Handling Instructions

Note:

Before using this Electric Power Tool, carefully read through these

HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is

recommended that these INSTRUCTIONS be kept readily available

as an important reference when using this power tool.

GENERAL OPERATIONAL PRECAUTIONS

WARNING! When using electric tools, basic safety

precautions should always be followed to reduce the

risk of fire, electric shock and personal injury, including

the following.

Read all these instructions before operating this product

and save these instructions.

For safe operations:

1. Keep work area clean. Cluttered areas and benches

invite injuries.

2. Consider work area environment. Do not expose

power tools to rain. Do not use power tools in

damp or wet locations. Keep work area well lit.

Do not use power tools where there is risk to cause

fire or explosion.

3. Guard against electric shock. Avoid body contact

with earthed or grounded surfaces. (e.g. pipes,

radiators, ranges, refrigerators).

4. Keep children and infirm persons away. Do not let

visitors touch the tool or extension cord. All visitors

should be kept away from work area.

5. Store idle tools. When not in use, tools should be

stored in a dry, high or locked up place, out of reach

of children and infirm persons.

6. Do not force the tool. It will do the job better and

safer at the rate for which it was intended.

7. Use the right tool. Do not force small tools or

attachments to do the job of a heavy duty tool. Do

not use tools for purposes not intended; for example,

do not use circular saw to cut tree limbs or logs.

8. Dress properly. Do not wear loose clothing or

jewelry, they can be caught in moving parts. Rubber

gloves and non-skid footwear are recommended

when working outdoors. Wear protecting hair

covering to contain long hair.

9. Use eye protection. Also use face or dust mask if

the cutting operation is dusty.

10. Connect dust extraction equipment.

If devices are provided for the connection of dust

extraction and collection facilities ensure these are

connected and properly used.

11. Do not abuse the cord. Never carry the tool by the

cord or yank it to disconnect it from the receptacle.

Keep the cord away from heat, oil and sharp edges.

12. Secure work. Use clamps or a vise to hold the work.

It is safer than using your hand and it frees both

hands to operate tool.

13. Do not overreach. Keep proper footing and balance

at all times.

14. Maintain tools with care. Keep cutting tools sharp

and clean for better and safer performance. Follow

instructions for lubrication and changing

accessories. Inspect tool cords periodically and if

damaged, have it repaired by authorized service

center. Inspect extension cords periodically and

replace, if damaged. Keep handles dry, clean, and

free from oil and grease.

15. Disconnect tools. When not in use, before servicing,

and when changing accessories such as blades,

bits and cutters.

16. Remove adjusting keys and wrenches. Form the

habit of checking to see that keys and adjusting

wrenches are removed from the tool before turning

it on.

17. Avoid unintentional starting. Do not carry a plugged-

in tool with a finger on the switch. Ensure switch is

off when plugging in.

18. Use outdoor extension leads. When tool is used

outdoors, use only extension cords intended for

outdoor use.

19. Stay alert. Watch what you are doing. Use common

sense. Do not operate tool when you are tired.

20. Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check

for alignment of moving parts, free running of

moving parts, breakage of parts, mounting and any

other conditions that may affect its operation. A

guard or other part that is damaged should be

properly repaired or replaced by an authorized

service center unless otherwise indicated in this

handling instructions. Have defective switches

replaced by an authorized service center. Do not

use the tool if the switch does not turn it on and off.

21. Warning

The use of any accessory or attachment, other than

those recommended in this handling instructions,

may present a risk of personal injury.

22. Have your tool repaired by a qualified person.

This electric tool is in accordance with the relevant

safety requirements. Repairs should only be carried

out by qualified persons using original spare parts.

Otherwise this may result in considerable danger

to the user.

PRECAUTIONS ON USING CIRCULAR SAW

1. Do not use saw blades which are deformed or

cracked.

2. Do not use saw blades made of high speed steel.

3. Do not use saw blades which do not comply with

the characteristics specified in these instructions.

4. Do not stop the saw blades by lateral pressure on

the side surface of disc.

5. Always keep the saw blade sharp.

6. Ensure that the lower guard moves smoothly and

freely.

7. Never use the circular saw with its lower guard

fixed in the open position.

8. Ensure that the retraction mechanism of the guard

system operates accurately.

9. Never operate the circular saw with grasping the

saw blade upside down or to the lateral direction.

10. Ensure that the material is free of foreign matters

such as nails.

11. For model C5YC, the saw blade’s diameters which

can be mounted are 125 mm or less.

12. Be careful of brake kickbac.

This circular saw incorporates an electric brake that

functions when the switch is released. As there is

some kickback when the brake functions, be sure to

hold the main body securely.

NAME OF PARTS

SPECIFICATIONS

Voltage (by areas)* (230 V, 240 V)

Cutting Depth 35 mm Max.

Power Input* 1010 W

Capacity 125 mm Max. Hole diam. 20 mm

Full Load Amp.* 4.7 A, 4.6 A

Dimensions (Length × Height × Width) 284 mm × 208 mm × 320 mm

No Load Speed 9600/min

Weight (without cord) 2.9 Kg

STANDARD ACCESSORIES

(1) Box wrench ............................................................... 1

(2) Guide .......................................................................... 1

(3) Dust bag .................................................................... 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

䡬Carbide Tipped Saw Blade (Dia. 125 mm) for the

gypsum board.

Optional accessories are subject to change without

notice.

Handle

Switch

Saw cover

Lever

Lower guard

Saw blade

Slide cover

Guide

Bevel piece

Inclined gauge

Wing bolt

Lock lever

Motor

Housing

Name plate

Gear cover

Brush holder

Brush cap

Clamp lever

Link

Wing bolt

Base

* Be sure to check the nameplate on product as it is subject to change by areas.

Produktspecifikationer

Varumärke:	Hitachi
Kategori:	Sågmaskin
Modell:	C 5YC
Typ av operation:	Draaiknop
Färg på produkten:	Wit
Antal effektnivåer:	2
Vikt:	1000 g
Bredd:	228 mm
Djup:	140 mm
Höjd:	240 mm
Snäll:	Ventilator elektrisch verwarmingstoestel
Tillgångar:	2000 W
Lämplig för:	Binnen
Justerbar termostat:	Ja
Överhettningsskydd:	Ja
Handvat(en):	Ja
Lätt att installera:	Ja
Dubbel isolering:	Ja
Avsluta:	Mat
Bärbar:	Ja
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 Hz
Lämplig för rumsvolymer upp till:	60 m³
Värmekraft:	2000 W
Placeringsalternativ:	Floor, Table
Värmeeffekt (min):	1000 W
Sommarventilation:	Ja
Anti-lutningsskydd:	Ja
Typ av termostatstyrning:	Mechanisch