Hitachi CP-DH300 Bruksanvisning

Hitachi Beamer CP-DH300

Läs nedan 📖 manual på svenska för Hitachi CP-DH300 (60 sidor) i kategorin Beamer. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/60
Projector
CP-DH300
User Manual
Thank you for purchasing this product. Please
read this manual before you operate your
projector. Save it for future reference.
1
Table of contents
Important safety
instructions .......................2
Introduction......................4
Projector features ................................. 4
Shipping contents.................................5
Projector exterior view.........................6
Controls and functions .........................7
Positioning your
projector..........................10
Choosing a location............................ 10
Projection dimensions........................ 11
Connection ......................12
Connecting a computer or monitor .... 13
Connecting Video source devices ...... 14
Operation........................17
Starting up the projector..................... 17
Using the menus................................. 18
Utilizing the password function ......... 19
Switching input signal........................21
Adjusting the projected image ........... 22
Magnifying and searching for details. 23
Selecting the aspect ratio ................... 24
Optimizing the image.........................26
Setting the presentation timer ............ 29
Hiding the image................................ 30
Locking control keys.......................... 30
Freezing the image............................. 30
Operating in a high altitude
environment ....................................... 31
Shutting down the projector...............31
Menu operation .................................. 32
Maintenance ...................42
Care of the projector.......................... 42
Lamp information .............................. 43
Troubleshooting .............48
Specifications..................49
Projector specifications...................... 49
Dimensions ........................................ 50
Timing chart ...................................... 51
Regulation Statements...55
FCC statement ................................... 55
ICES-003 ........................................... 55
WEEE................................................ 55
Copyright information...57
Warranty and
after-service ....................58
Entries and graphical symbols expla-
nation
The following entries and graphical symbols are
used for the manuals and the product as follows,
for safety purpose. Please know their meanings
beforehand, and heed them.
WARNING: This entry warns of a risk of
serious personal injury or even death.
CAUTION: This entry warns of a risk of
personal injury or physical damage.
2
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that you
follow the instructions mentioned in this manual and marked on the product.
Safety Instructions
WARNING
1. Please read this manual before you operate your projector. Save it for future
reference.
2. Do not look straight at the projector lens during operation. The intense light beam
may damage your eyes.
3. Refer servicing to qualified service personnel.
4. Always open the lens shutter or remove the lens cap when the projector lamp is
on.
5. In some countries, the line voltage is NOT stable. This projector is designed to operate
safely within a mains voltage between 100 to 240 volts AC, but could fail if power
cuts or surges of ±10 volts occur. In areas where the mains voltage may fluctuate
or cut out, it is recommended that you connect your projector through a power
stabilizer, surge protector or uninterruptible power supply (UPS).
6. Do not block the projection lens with any objects when the projector is under
operation as this could cause the objects to become heated and deformed or even
cause a fire. To temporarily turn off the lamp, press BLANK on the projector or
remote control.
7. The lamp becomes extremely hot during operation. Allow the projector to cool for
approximately 45 minutes prior to removing the lamp assembly for replacement.
8. Never replace the lamp assembly or any electronic components unless the projector is
unplugged.
9. Do not place this product on an unstable cart, stand, or table. The product may fall,
sustaining serious damage.
10. Do not attempt to disassemble this projector. There are dangerous high voltages inside
which may cause death if you should come into contact with live parts. The only user
serviceable part is the lamp which has its own removable cover.
Under no circumstances should you ever undo or remove any other covers. Refer
servicing only to suitably qualified professional service personnel.
11. Do not place this projector in any of the following environments.
- Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls
and free flow of air around the projector.
- Locations where temperatures may become excessively high, such as the inside of a
car with all windows rolled up.
- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical
components, shortening the projector's life span and darkening the picture.
- Locations near fire alarms
- Locations with an ambient temperature above 40°C / 104°F
- Locations where the altitudes are higher than 3050 m (10007 feet).

Produktspecifikationer

Varumärke: Hitachi
Kategori: Beamer
Modell: CP-DH300

Behöver du hjälp?

Om du behöver hjälp med Hitachi CP-DH300 ställ en fråga nedan och andra användare kommer att svara dig




Beamer Hitachi Manualer

Beamer Manualer

Nyaste Beamer Manualer