Honda HRG416XB Bruksanvisning

Honda Gräsklippare HRG416XB

Läs nedan 📖 manual på svenska för Honda HRG416XB (113 sidor) i kategorin Gräsklippare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/113

3 EN

D) MAINTENANCE AND STORAGE

1) Keep all nuts and screws tight to be sure the machine is always in safe working

condition. Routine maintenance is essential for safety and for maintaining a high

performance level.

2) Check the stone-guard and grass catcher frequently for wear or deterioration.

3) Be careful during adjustment of the machine to prevent entrapment of the fingers

between moving cutting-means and fixed parts of the machine.

4) Always allow the machine to cool down before storing.

5) When servicing the cutting-means be aware that, even though the power sources

is switched off, the cutting-means can still be moved.

6) For safety reasons, never use the machine when it has worn or damaged parts.

Parts must be replaced and not repaired. Use original spare parts. Parts that are

not of the same quality can damage the equipment and impair your safety.

7) To reduce fire hazards, keep machine and in particular, the motor, free of grass,

leaves, or excessive grease. Never leave containers with cut grass inside a

storage area.

8) To clean the grass catcher, use water from a hose. Do not use high pressure

washer.

9) Correct storage is essential for maintaining the life of the product. If possible,

avoid storage areas with high humidity which could cause rust or corrosion.

10) End of season storage: Remove battery pack and store both machine and battery

pack in a dry safe place away from direct sunlight. Do not place objects on top of

the machine.

11) When storing for extended periods, thoroughly clean the product beforehand.

E) GENERAL PRECAUTIONS

1) Any repairs must be done at your servicing dealer. Turn off the isolator key and

remove it from the machine if the machine begins to vibrate abnormally, then

contact your servicing dealer for inspection.

2) Keep both hands on the grip during start up.

3) Parts subject to wear must only be replaced at your servicing dealer.

4) Never use the machine if the battery pack is damaged or worn.

5) Do not touch the cutting-means until the isolator key is removed from the machine

and that the cutting-means is completely still.

6) Before transport or storage ensure machine is clean and free from debris, if

necessary clean with a soft, dry brush.

7) Do not use forced water and avoid wetting the motor or the electrical components.

Do not use harsh products for cleaning the chassis.

8) Keeping the underside of the machine clean will improve performance. Always

keep the battery pack attaching area clean.

9) Store the isolator key safely and keep it away from children.

F) ADDITIONAL WARNINGS

1) WARNING - DANGER! Moisture and electricity are not compatible:

- always handle and connect battery pack in dry conditions.

- never allow battery pack to contact wet areas (puddles or wet grass).

2) Wear work gloves for disassembling and reassembling cutting-means.

3) Keep the cutting-means balanced during sharpening. All work on the

cutting-means (disassembly, sharpening, balancing, reassembly and/or

replacing) are demanding jobs that require special skills as well as special tools.

For safety reasons, these jobs are best carried out at your servicing dealer.

4) Recommendations for optimal handling of the battery pack and charger.

WARNING - Do not attempt to charge non rechargeable batteries with the

charger.

- for your safety, ensure the isolator key and operator controls are in the off

position before inserting battery pack. Inserting the battery pack into machine

that have the switch on can be dangerous.

- insert the battery pack until the locking mechanism clicks. To remove the battery

pack, operate battery cover opening lever.

5) Rechargeable batteries are to be removed from the machine before being

charged.

G) TRANSPORTATION AND HANDLING

1) Whenever the machine is to be handled, lifted, transported or tilted you must:

- wear sturdy work gloves.

- grasp the machine at the points that offer a safe grip, taking account of the

weight and its distribution.

- use an appropriate number of people for the weight of the machine and the

characteristics of the vehicle or the place where it must be placed or collected.

2) During transport, fasten the machine securely with cables or chains.

3) Ensure that isolator key and the battery pack are removed from the machine

before transporting the machine or folding handle.

Produktspecifikationer

Varumärke:	Honda
Kategori:	Gräsklippare
Modell:	HRG416XB
Vikt:	34000 g
Bredd:	437 mm
Djup:	132 mm
Höjd:	648 mm
Processorfrekvens:	0 GHz
Processorfamilj:	Intel® Xeon® E5 v2 familie
Ethernet LAN:	Ja
Antal USB 2.0-portar:	4
VGA (D-Sub) port(ar):	1
Antal Ethernet LAN (RJ-45)-portar:	3
Nätförsörjning:	1280 W
Processoruttag:	LGA 2011 (Socket R)
Systembuss:	9.6 GT/s
Maximalt internminne:	1500 GB
Typ av optisk enhet:	Nee
Kompatibla operativsystem:	32 bit Window OS, 32 bit Linux OS, 64 bit Window OS, 64 bit Linux OS, VMware OS *, Citrix.
Bostadstyp:	Rack (3U)
Redundant strömförsörjning:	Ja
ETC:	Ja
Minnesplatser:	24
Antal installerade processorer:	2
Chipset moderkort:	Intel® C602J
Seriell port(ar):	2
LAN-kontroller:	Intel® X540
Typer av RAID:	0, 1,5, 10
Antal SATA III-kontakter:	6
Drifttemperatur (TT):	10 - 35 °C
Relativ luftfuktighet i drift (VV):	8 - 90 procent
BIOS-typ:	UEFI
Antal SAS-portar:	8