Honeywell 5107 Bruksanvisning

Läs nedan 📖 manual på svenska för Honeywell 5107 (8 sidor) i kategorin Valv. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Models 5103-5108 / 5112-5113
STEEL SECURITY SAFE
Read this manual carefully and never store it inside the safe!
1
Models 5103-5108 / 5112-5113
Steel Security Safe with Digital Lock
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer
Assistance Department by telephone.
Store will not accept returned products without prior authorization. You must first
contact our consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter
800 860 1677 to complete - - your call. (Toll Free)
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
PRODUCT OVERVIEW
2
SETUP & OPERATION
STEP 1 . INSTALL BATTERIES
1. Use the Override Key to Unlock & Open the safe door.
2. Remove battery compartment (A) cover on inside door.
3. Insert 4 “AA” batteries (included).
Ensure the batteries are installed in the correct direction, with
regard to polarity (+ and - ) See diagram.
4. Replace the battery cover.
5. Do not close door before testing digital lock.
STEP 2 . TEST DIGITAL LOCK
LOCK SAFE
1. Enter the factory preset pass code: “1”- “5” “9”
2. Immediately after entering the code, press the “lock” key.
3. Lock bolts should extend into the locked position.
UNLOCK SAFE
1. Enter the factory preset pass code: “1”- 5” “9”
2. Immediately after entering the code, press the “lock key.
3. Lock bolts should recede into the unlocked position.
STEP 3 . LOCK SAFE WITH A NEW PASS CODE
1. Close the safe door and hold it closed.
2. 6 digit) passEnter a new (3- . code followed by “lock”
3. Motorized lock will return door to closed position.
4. The LED will display “CLOSED” for 3 seconds followed by
the active code entered as a reminder.
NOTE: The lock design allows for a new user code each time that the safe is locked
STEP 4. OPEN SAFE WITH NEW PASS CODE
1. nter the new passTo open safe e code that was used to
lock the safe followed by “lock”.
2. The motorized lock will unlock LED will the door and the
display “OPENED”.
PRIVACY MODE:
To prevent the LED displaying the pass code entered, press “clear” prior to entering a code.
LOCK SOUND:
To turn “beep” sound On or Off, press the “CLEAR” button twice.
OPEN SAFE WITH OVERRIDE KEY
1. Remove override key cover with small screwdriver.
2. Insert override key and turn left to unlock safe.
3. Pull door open using key as handle.

Produktspecifikationer

Varumärke: Honeywell
Kategori: Valv
Modell: 5107

Behöver du hjälp?

Om du behöver hjälp med Honeywell 5107 ställ en fråga nedan och andra användare kommer att svara dig




Valv Honeywell Manualer

Valv Manualer

Nyaste Valv Manualer