Honeywell 5852 Bruksanvisning
Läs nedan 📖 manual på svenska för Honeywell 5852 (10 sidor) i kategorin Valv. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/10
Model / Modèl / Modelo 5851 & 5852
STEEL DRAWER AND SHELF SAFE
COFFRE-FORT DE TIROIR EN ACIER
COFFRE-FORT AVEC TIROIR ET ÉTAGÈRE EN ACIER
Read this manual carefully and never store it inside the safe!
Lire attentivement ce manuel et ne jamais le garder à l’intérieur du coffre-fort !
¡Lea este manual cuidadosamente y nunca lo guarde dentro de la caja fuerte!
1
Model 5851 & 5852
Steel Drawer and Shelf Safe
PACKAGE CONTENTS
1 – Steel Drawer Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
1
– Removable Steel Shelf
1
– Foam Floor Mat
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your
safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without
prior authorization. You must first contact our
consumer assistance department.
US/Canada
1-877-354-5457 (Toll Free)
Australia
0011-800-5325-7000 (Toll Free)
Germany
00-800-5325-7000 (Toll Free)
PRODUCT OVERVIEW
A - Safe Cabinet Body
B - Safe Door Assembly
C - Electronic Digital Keypad
D - Safe Entry Lever
E - Override Key Cover
F - Serial Number Label
G - Light On / Off Switch
H - Reset Button
I - Battery Cover
2
SETUP
STEP 1. OPEN SAFE DOOR
All new safes are shipped with the door unlocked. If the door has become locked during
shipping, open it with the override key as follows:
USING THE OVERRIDE KEY:
1. Remove Override key cover.
2. Insert override key and turn left to unlock safe.
3. Lift Lever towards you
4. Lift Safe door upwards until it locks in place
STEP 2. INSTALL BATTERIES
1. Remove battery cover on inside door.
2. Insert 4 “AA” batteries (included).
3. Replace the battery cover.
4. Do not close door before testing digital lock.
5. Insert batteries in the correct direction (See diagram)
STEP 3. TEST DIGITAL LOCK
1. With door open, make sure lever is in the locked position.
2. Enter the preset pass code: “1”-“5”–“9”-“B”.
3. Lift lever within 5 seconds.
4. Lock bolts should recede into the unlocked position.
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press reset button inside door.
2. Ready light flashes along with a beep.
3. Enter new code (3 to 8 digits) followed by “A” or “B”.
4. Safe will beep and ready light will turn off.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. Make sure lever is fully in the closed position
2. Enter your new code followed by “A” OR “B”.
3. Pull lever towards you and lift door open fully
TO CLOSE THE SAFE
1. Lower door by lever into closed position.
2. Turn door entry knob to left to engage the lock
bolts and lock safe.
NOTE: Safe will not operate if lever is not fully in the locked position.
3
SECURE LOCKOUT PERIODS
If a wrong code is entered three times in a row, the digital keypad will begin a five-minute
secure lockout period. During this secure lockout period the keypad will become disabled.
Once the lockout period has ex using the correct pass code. pired, the safe can be unlocked
You may use the override key to open safe, but keypad will complete the full lockout period.
OVERRIDE ACCESS KEY
If the pass code is unavailable or your keypad fails due to dead batteries or other malfunction,
you can open the safe using the override access key (see STEP 1. in the SETUP section).
REPLACING BATTERIES
Note: The pass code will not be erased if the batteries become weak or are removed.
To replace the batteries please follow the instructions in STEP 2. in the SETUP section. If your
batteries are completely dead and you cannot open the safe by using the digital keypad, use
the override access key to open safe and access the battery compartment.
NOTE: It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries. Weak or dead
batteries should be removed promptly. Also remove batteries if the safe will not be in use for an
extended period of time.
IF YOU FORGET THE PASSCODE
1.
Use the override access key to open safe. Refer to STEP 1 in the SETUP section.
2.
Program a new pass code. Refer to STEP 4 in the SETUP section.
LOCATING SAFE IDENTIFICATION NUMBERS
SERIAL NUMBER
Located on lower right corner on front of safe.
Do Not Remove Safe I.D. Tags!
KEY NUMBER
4 Digit Number etched on the metal collar located around
the key hole.
4
ORDERING NEW / REPLACEMENT KEYS
The following information is required to order keys:
1. PROOF OF OWNERSHIP (1 of 2 Options Below)
SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY!
• Copy of sales receipt showing Store, Date & Product Description.
• Copy of your picture I.D. (Drivers license, passport, regular I.D.).
PRODUCT OWNERSHIP VERIFICATION FORM
If sales receipt is not available, contact us by email or telephone to request a
“Product Ownership Verification Form”.
2. ORDER INFORMATION
CONTACT INFORMATION
• Name & Shipping Address
• E-mail address (If Available)
• Telephone Number
• Best Time to Contact You
PRODUCT INFORMATION
• Safe Model #
• Safe Serial #
• Lock Key #
• Quantity of Keys Ordered
3. PAYMENT INFORMATION
AMOUNT DUE
• Per Key:
US/Canada - $12.00 (USD)
Australia - $15.00 (AUD)
Germany - €11.00 (EU)
• Express Delivery:
Contact us for Additional Charges
METHOD OF PAYMENT
• Telephone:
Visa or
MasterCard
• Mail:
Check or
Money Order
Subject to change without prior notification.
CONTACTING CONSUMER ASSISTANCE
EMAIL: LHLPCustomerService@LHLPinc.com
ADDRESS:
Consumer Assistance Dept.
LH Licensed Products, Inc.
860 East Sandhill Avenue
Carson, CA 90746 USA
TELEPHONE: US/Canada 1-877-354-5457 (Toll Free)
Australia 0011-800-5325-7000 (Toll Free)
Germany 00-800-5325-7000 (Toll Free)
CALL CENTER HOURS: US/Canada 7am – 5pm (PST) Mon - Fri
Australia 12am - 10am (AEST) Tue–Sat
Germany 4pm - 2am (CET) Mon–Fri
CALL BACK HOURS: Australia 12am – 3pm (AEST) Tue–Sat
Germany 4pm - 7am (CET) Mon–Fri
INTERNATIONAL CALL BACK HOURS:
If you need to speak with a consumer assistant and cannot contact us during the Call Center
hours above, please send an email or leave a telephone message, including your Name,
Telephone Number and the best time for us to contact you during the Call Back hours
above. Your call will be returned next working day.
5
MOUNTING KIT
You may bolt your safe to a wall or shelf for added theft protection.
To secure your safe to a wall or shelf:
1. Select a suitable and convenient location for your safe.
2. Empty the safe and remove the carpet.
3. Locate the predrilled holes on the inside of safe.
4. Place your safe in the desired location.
5. Line up the predrilled holes and mark the shelf or wall through the holes.
NOTE: It is not recommended to attempt to bolt to both shelf and wall.
6. Move the safe aside to clear marked spots for drilling.
7. Drill holes appropriate for hardware being used and the mounting surface.
INCLUDED: (2 each – bolts, washers and masonry anchors).
8. Place the safe back over the holes and install the fasteners as required.
9. Once completed, replace the carpet.
NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH
Licensed Products is not responsible for any costs incurred if the unit is to be replaced.
If you have any questions about mounting the safe, please check with your local home
center/hardware retailer or independent contractor.
Produktspecifikationer
| Varumärke: | Honeywell |
| Kategori: | Valv |
| Modell: | 5852 |
Behöver du hjälp?
Om du behöver hjälp med Honeywell 5852 ställ en fråga nedan och andra användare kommer att svara dig
Valv Honeywell Manualer
22 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
19 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
Valv Manualer
- Valv Philips
- Valv Abus
- Valv Salvus
- Valv Workzone
- Valv Nedis
- Valv Yale
- Valv SereneLife
- Valv Hard Head
- Valv Dometic
- Valv Master Lock
- Valv Perel
- Valv Burg-Wachter
- Valv SentrySafe
- Valv Phoenix
- Valv Olympia
- Valv Kidde
- Valv Topcraft
- Valv Barska
- Valv First Alert
- Valv Sygonix
- Valv Conrad
- Valv Fluke
- Valv Varo
- Valv Sentry
- Valv Filex
- Valv Kreator
- Valv Sistec
- Valv SMC
- Valv FireKing
- Valv Rottner Tresor
- Valv Olymp
- Valv Suncast
- Valv Protector
- Valv Homak Security
- Valv NOFIRE
- Valv Technomax
- Valv Kreator-Varo
- Valv M-Locks
- Valv Fichero
- Valv EasySafe
- Valv ROMA
- Valv Stamony
Nyaste Valv Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
20 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024