Honeywell Performance HB74 Bruksanvisning

Honeywell övervakningskamera Performance HB74

Läs nedan 📖 manual på svenska för Honeywell Performance HB74 (1 sidor) i kategorin övervakningskamera. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

www.honeywellvideo.com

+1.800.796.CCTV (North America only)

HVSsupport@honeywell.com

Document 800-11943 - Rev A - 05/2012

The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting

from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to

incorporate such changes.

FCC Compliance Statement

Information to the user: This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

CAUTION Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Canadian Compliance Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.

WARNING This device is configured for 12 VDC operation only. Do NOT connect to higher

voltage. Use only with NRTL approved 12 VDC power supplies. To prevent potential ground

loop issues a separate PSU should be used for each camera. A multiple output PSU may be

used if the multiple output PSU has isolated and protected (2A MAX) outputs.

Warranty and Service

Subject to the terms and conditions listed on the Product warranty, during the warranty period

Honeywell will repair or replace, at its sole option, free of charge, any defective product returned

prepaid.

In the event you have a problem with any Honeywell product, please call Customer Service at

1.800.796.CCTV (North America only) for assistance or to request a Return Merchandise

Authorization (RMA) number.

Be sure to have the model number, serial number, and the nature of the problem available for the

technical service representative.

Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to

Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may

be refused.

Safety Instructions

BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW ALL INSTRUCTIONS.

AFTER INSTALLATION, retain the safety and operating instructions for future reference.

CAUTION The light emitted from the near-infrared light emitting diodes (LEDs) provides

illumination over a wide area. This light is not considered a risk to the unshielded human eye.

However, as with any light source, it is recommended that normal precautions be taken to avoid

unnecessary exposure. For example, avoid stairing into the beam or viewing directly with optical

instruments at close range.

NOTE IR LEDs could be warm after prolonged use.

This camera should be installed by qualified personnel only.

Please ensure that your installation area can safely support the weight of the camera.

Do not touch the camera lens, dome or bezel (front glass plate).

Do not drop the camera or subject it to physical shock.

Do not use a strong or abrasive detergent when cleaning the camera.

Do not disassemble the camera other than to make initial adjustments.

Please ensure that your installation area can support the weight of the camera.

Operating Conditions

Do not aim the camera towards an extreme light source to prevent damaging the CCD.

Only use the camera where temperatures are within the limits shown in the specifications

section. Be especially careful to provide ventilation when operating under high temperatures.

CAUTION THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE

CONSTITUTING A RISK OF

ELECTRIC SHOCK IS PRESENT

WITHIN THE UNIT.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THIS SYMBOL INDICATES THAT

IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS

ACCOMPANY THIS UNIT.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

Camera Dimensions

As surroundings darken, it

switches automatically from

color to black-and-white mode

to enhance sensitivity.

Key Features

1/3" Interline Transfer CCD

Discreet, bullet-style camera with 12 IR LEDs

Built in, fixed lens (f=3.8 mm)

Smart IR for even distribution of the IR

Standard resolution color: 420 TVL

Easy to install mounting bracket

Weatherproof housing with IP66 rating

Equalization valve

IR LED visible range of 45 ft. (15m),

depending on scene reflectance

12 VDC input

Package Includes

Performance Series

Standard Resolution IR Bullet Camera

HB74

Operating Guide

Specifications

Video Signal Specifications

Video Standard: NTSC

Scanning System: 525 lines/60 lines

Image Sensor: 1/3” High Sensitivy CCD

Number of Pixels (HxV): 510 x 492

Minimum Illumination 0 lux night, operates in complete darkness

Horizontal Resolution: 420 TVL

Video Output: 1.0 Vp-p, 75 Ohms

Sync System: 12 VDC: Internal

S/N Ratio: 50 dB or more (AGC off)

Automatic Electronic Shutter: 1/60-1/120,000 s

Lens Type (IR Corrected): Built in Fixed Lens (f=3.8 mm)

IR LEDs: 850 nm, 12 LEDs

IR Illumination Distance: 45 ft (13.7m)

White Balance: Auto

Electrical Specifications

Input Voltage: 12 VDC

Power Consumption: 3.6 W (max) / 300 mA with IR LEDs on

Mechanical Specifications

Dimensions: See Diagrams

Weight: 1.3 lb (0.6 kg)

Construction: Housing: Brushed and anodized aluminum with sunshield

Finish: Brushed and anodized aluminum

Connector: Main Video: BNC connector

Power Input: 12 VDC ± 10%

Environmental Specifications

Temperature: Operating: 14°F to 122°F (-10°C to 50°C)

Storage: -4°F to 140°F (-20°C to 60°C)

Relative Humidity: 0% to 95%, non-condensing

Rating: IP66

Accessories — Power Supply

HPT12DC500 12 VDC/500 mA Plug-in Regulated 2.1 mm

Coaxial Plug UL Listed/CSA Certified

Regulatory

Emissions: FCC, Part 15B, Class A

Immunity: EN 50130-4

Document 800-11943 - Rev A - 05/2012

Manual L-wrench

Sunshield

screw Mounting bracket

screws

One camera

4.84 (123.0 mm)”

2.58 (65.6 mm)”2.82 (71.6 mm)”

2.68 (68.0 mm)”

3.98 (101.3 mm)”

3.83 (97.3 mm)”

1.96 (50.0 mm)”

Produktspecifikationer

Varumärke:	Honeywell
Kategori:	övervakningskamera
Modell:	Performance HB74
Färg på produkten:	Zwart
Vikt:	16 g
Bredd:	35 mm
Djup:	50 mm
Höjd:	10 mm
Förpackningens vikt:	15.1 g
Förpackningens bredd:	90 mm
Djuppackning:	125 mm
Förpackningshöjd:	15 mm
Hållbarhetscertifikat:	RoHS
Nettovikt:	20 g
Antal per paket:	1 stuk(s)
Anslutning(ar):	LP4, SATA
Anslutning 1:	SATA (15-pin)
Anslutning 2:	LP4 (4-pin)