Hoshizaki IM-500SAB Bruksanvisning

Hoshizaki Ismaskin IM-500SAB

Läs nedan 📖 manual på svenska för Hoshizaki IM-500SAB (39 sidor) i kategorin Ismaskin. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/39
Hoshizaki
“A Superior Degree
of Reliability”
www.hoshizaki.com
Model
IM-500SAA
Stackable Square Cuber
Hoshizaki America, Inc.
SERVICE MANUAL
Number: M029-897
Issued: 2-8-2013
Revised: 5-19-2014
2
WARNING
Only qualied service technicians should install and service the appliance. To
obtain the name and phone number of your local Hoshizaki Certied Service
Representative, visit www.hoshizaki.com. No service should be undertaken until
the technician has thoroughly read this Service Manual. Failure to service and
maintain the appliance in accordance with this manual will adversely affect safety,
performance, component life, and warranty coverage and may result in costly water
damage. Proper installation is the responsibility of the installer. Product failure or
property damage due to improper installation is not covered under warranty.
Hoshizaki provides this manual primarily to assist qualied service technicians in the
service of the appliance.
Should the reader have any questions or concerns which have not been satisfactorily
addressed, please call, send an e-mail message, or write to the Hoshizaki Technical
Support Department for assistance.
Phone: 1-800-233-1940; (770) 487-2331
Fax: 1-800-843-1056; (770) 487-3360
E-mail: techsupport@hoshizaki.com
HOSHIZAKI AMERICA, INC.
618 Highway 74 South
Peachtree City, GA 30269
Attn: Hoshizaki Technical Support Department
Web Site: www.hoshizaki.com
NOTE: To expedite assistance, all correspondence/communication MUST include the
following information:
• Model Number
• Serial Number
• Complete and detailed explanation of the problem.
3
CONTENTS
Important Safety Information ................................................................................................. 4
I. Construction and Water/Refrigeration Circuit Diagram ....................................................... 6
A. Construction .................................................................................................................. 6
B. Water/Refrigeration Circuit Diagram .............................................................................. 7
II. Sequence of Operation and Service Diagnosis ................................................................. 8
A. Sequence of Operation Flow Chart ............................................................................... 8
B. Sequence of Operation ................................................................................................. 9
1. Startup Cycle ............................................................................................................ 9
2. Harvest Cycle .......................................................................................................... 9
3. Freeze Cycle ............................................................................................................ 9
4. Shutdown ............................................................................................................... 10
C. Service Diagnosis Table ...............................................................................................11
D. Bin Control Check and Cleaning ................................................................................. 14
1. Bin Control Check .................................................................................................. 14
2. Bin Control Cleaning .............................................................................................. 15
E. Evaporator Thermistor Check ...................................................................................... 16
III. Controls and Adjustments ............................................................................................... 17
A. Control Switch ............................................................................................................. 17
B. Control Board .............................................................................................................. 17
1. Control Board Layout ............................................................................................. 18
C. Control Buttons ............................................................................................................ 19
D. Control Board Settings ................................................................................................ 20
E. Control Board Information Display .............................................................................. 23
F. Control Board Model Code Setting .............................................................................. 25
1. Control Board Replacement ................................................................................... 25
2. Checking or Changing the Control Board Model Code .......................................... 25
G. Error Codes ................................................................................................................ 27
H. Quick Adjustments ...................................................................................................... 28
1. Dimple Diameter .................................................................................................... 28
2. Ice Clarity .............................................................................................................. 29
IV. Refrigeration Circuit and Component Service Information.............................................. 30
A. Refrigeration Circuit Service Information .................................................................... 30
B. Component Service Information .................................................................................. 32
V. Maintenance .................................................................................................................... 34
VI. Preparing the Icemaker for Periods of Non-Use ............................................................. 35
VII. Disposal ......................................................................................................................... 36
VIII. Technical Information .................................................................................................... 37
A. Specication Data ....................................................................................................... 37
B. Performance Data ....................................................................................................... 38
C. Wiring Diagram ........................................................................................................... 39
IMPORTANT
This manual should be read carefully before the appliance is serviced. Read
the warnings and guidelines contained in this manual carefully as they provide
essential information for the continued safe use, service, and maintenance of the
appliance. Retain this manual for any further reference that may be necessary.

Produktspecifikationer

Varumärke: Hoshizaki
Kategori: Ismaskin
Modell: IM-500SAB

Behöver du hjälp?

Om du behöver hjälp med Hoshizaki IM-500SAB ställ en fråga nedan och andra användare kommer att svara dig




Ismaskin Hoshizaki Manualer

Ismaskin Manualer

Nyaste Ismaskin Manualer