Hoshizaki KM-1601SAJ3 Bruksanvisning

Hoshizaki Ismaskin KM-1601SAJ3

Läs nedan 📖 manual på svenska för Hoshizaki KM-1601SAJ3 (73 sidor) i kategorin Ismaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/73

Models

KM-1301SAJ/3, SWJ/3, SRJ/3

KM-1601SAJ/3, SWJ/3, SRJ/3

KM-1900SAJ/3, SWJ/3, SRJ/3

KM-2200SWJ3, SRJ3

KM-2600SWJ3, SRJ3

Modular Crescent Cuber

Service Manual

Number: 73216

Issued: 10-27-2017

Revised: 3-14-2018

hoshizakiamerica.com

WARNING

Only qualied service technicians should install and service the appliance. To

obtain the name and phone number of your local Hoshizaki Certied Service

Representative, visit www.hoshizaki.com. No installation or service should be

undertaken until the technician has thoroughly read this Service Manual. Likewise,

the owner/manager should not proceed to operate the appliance until the installer

has instructed them on its proper operation. Failure to install, operate, and

maintain the appliance in accordance with this manual will adversely affect safety,

performance, component life, and warranty coverage and may result in costly water

damage. Proper installation is the responsibility of the installer. Product failure or

property damage due to improper installation is not covered under warranty.

Hoshizaki provides this manual primarily to assist qualied service technicians in the

installation, maintenance, and service of the appliance.

Should the reader have any questions or concerns which have not been satisfactorily

addressed, please call, send an e-mail message, or write to the Hoshizaki Technical

Support Department for assistance.

Phone: 1-800-233-1940; (770) 487-2331

Fax: 1-800-843-1056; (770) 487-3360

E-mail: techsupport@hoshizaki.com

618 Highway 74 South

Peachtree City, GA 30269

Attn: Hoshizaki Technical Support Department

NOTE: To expedite assistance, all correspondence/communication MUST include the

following information:

• Model Number

• Serial Number

• Complete and detailed explanation of the problem.

CONTENTS

Important Safety Information 6 .................................................................................................

I. Construction and Water/Refrigeration Circuit Diagram 8 .......................................................

A. KM Construction............................................................................................................ 8

1. Air-Cooled Models (SAJ/3) 8 .......................................................................................

2. Water-Cooled Models (SWJ/3) 9 ................................................................................

3. Remote Models (KM-1301SRJ/3 and KM-1601SRJ/3) .......................................... 10

4. Remote Models (KM-1900SRJ/3, KM-2200SRJ3, KM-2600SRJ3) ........................11

B. Bin Control .................................................................................................................. 12

1. Single Bin Control .................................................................................................. 12

2. Stacked Bin Control ............................................................................................... 12

C. Water/Refrigeration Circuit Diagram ............................................................................ 13

1. Air-Cooled Models (SAJ/3) ..................................................................................... 13

2. Water-Cooled Models (SWJ/3) .............................................................................. 14

3. Remote Models (SRJ/3) ........................................................................................ 15

II. Sequence of Operation and Service Diagnosis ............................................................... 16

A. Sequence of Operation Flow Chart ............................................................................. 16

1. Operation Flow Chart ............................................................................................ 16

2. Shutdown Flow Chart ............................................................................................ 17

3. Freeze-Time Correction Chart ............................................................................... 18

B. Service Diagnosis ....................................................................................................... 19

C. Freeze-Time Correction Cycle (90 min.) 26 .....................................................................

D. Control Board Check 28 ...................................................................................................

E. Bin Control Check 29 .......................................................................................................

1. Bin Control Check 29 ..................................................................................................

2. Bin Control Cleaning 30 ..............................................................................................

F. Float Switch Check and Cleaning 31 ................................................................................

1. Float Switch Check 31 ................................................................................................

2. Float Switch Cleaning 32 ............................................................................................

G. Thermistor Check ........................................................................................................ 33

H. Control Switch 33 .............................................................................................................

I. Diagnostic Tables .......................................................................................................... 34

J. Freeze-Up Check List 38 ..................................................................................................

IMPORTANT

This manual should be read carefully before the appliance is serviced. Read

the warnings and guidelines contained in this manual carefully as they provide

essential information for the continued safe use, service, and maintenance of the

appliance. Retain this manual for any further reference that may be necessary.

Produktspecifikationer

Varumärke:	Hoshizaki
Kategori:	Ismaskin
Modell:	KM-1601SAJ3
Färg på produkten:	Zwart
Vikt:	9000 g
Bredd:	220 mm
Djup:	481 mm
Höjd:	488 mm
Snäll:	PC
Vormfaktor:	Midi Tower
På-/-Av-knapp:	Ja
Ljudingångar:	Ja
Ljudutgång:	Ja
Material:	Plastic, Steel, Tempered glass
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ C:	1
Återställningsknapp:	Ja
Strömförsörjning ingår:	Nee
Antal 2,5" fack:	2
Antal 3,5" fack:	2
Strömförsörjningsplats:	Bodem
Antidammfilter:	Ja
Moderkortsformfaktorer som stöds:	ATX, Mini-ATX, Mini-ITX
Sidofönster:	Ja
Maximal CPU-kylarhöjd:	173 mm
Maximal grafikkortslängd:	395 mm
Maximal PSU-längd:	200 mm
Maximalt antal främre fläktar:	3
Främre fläktar som stödjer diametrar:	120,140 mm
Maximalt antal fläktar överst:	3
Toppfläktar som stöder diametrar:	120,140 mm
Max antal bakre fläktar:	1
Bakre fläktar stödjer diametrar:	120 mm
Installerade bakre fläktar:	1x 120 mm
Antal främre fläktar installerade:	3x 120 mm
Maximalt antal sidofläktar:	2
Sidofläktar som stödjer diametrar:	120 mm
Maximalt antal bottenfläktar:	2
Bottenfläktar som stöder diametrar:	120 mm