IFM DI5010 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM DI5010 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Installation instructions
Compact speed monitor
DIA
701092 / 03 09 / 2007
UK
UK
UK
UK
UK
2
1 Functions and features
The Compact speed monitor detects without contact whether a minimum speed is
reached and signals underspeed by means of a switching signal.
Nominal sensing range (Sn) 10 mm; Preset speed adjustable, see type label.
2 Installation
E
A
BC
D
F
A
B
C
³F
³2 x A
½ x Sn
D
E
Fix the unit by means of a mounting device and secure it by means of the nuts
provided so that it cannot work loose. Flush installation.
Adhere to the above dimensions to ensure a correct function.
3 Electrical connection
Disconnect power.
Connect the unit according to the indications on the type label.
Note: insert a miniature fuse according to the technical data sheet, if specified.
Recommendation: check the safe functioning of the unit after a short circuit.
3
UK
4 Adjustment
1
2
LEDs
Green LED: output switched (actual
speed > preset speed)
Yellow LED (optional for 2-wire AC/DC):
sensor damped
multiturn potentiometer
preset value
1.
2.
Keep the speed to be monitored in the plant on a constant level.
The yellow LED must flash (damping pulses are detected).
Start the adjustment according to A or B when the start-up delay* (AÜ see type
label) has elapsed.
A
Green LED lit
B
Green LED not lit
Turn the pot clockwise until the LED goes
off.
Turn the pot slowly anticlockwise until the
LED is lit.
Turn the pot slowly anticlockwise until the
LED is let.
On delivery: pot at the right end stop (except DI5011 = approx. 30 pulses/min).
5 Operation
The operation is maintenance-free. Ensure the following for a correct function:
Keep the sensing face and the open space free of metal deposits and foreign
bodies.
Do not operate units with high field intensity (e.g. walkie-talkies) at close range
to the speed monitor.
*) The start-up delay (AÜ) suppresses an error signal as long as the machine is in
the process of starting and has not yet reached its nominal speed. After applica-
tion of the operating voltage the start-up delay is active only once.
If the drive is often turned on and off, couple the supply voltage of the drive and
the monitor. By doing so, the start-up delay is active every time the drive is turned
on.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: DI5010
Färg på produkten: Zwart
Vikt: 58 g
Bredd: 32 mm
Djup: 69.5 mm
Höjd: 26 mm
Snäll: Voorlicht
Husmaterial: Aluminium
Typ lampa: LED
Internationell säkerhetskod (IP): IPX4
På / Av knapp: Ja
Typ av strömkälla: Batterij/Accu
Medföljande kablar: Micro-USB
Vattentät: Ja
Drifttid: 4.5 uur
Indikation på lågt batteri: Ja
Lichtstroom: 650 lm
Dammtålig: Ja
LED färg: Wit
Fäste med klämma: Ja
USB-laddningsuttag: Ja
Lätt att installera: Ja
Laddning via USB: Ja
Väderbeständig: Ja
Batteriteknik: Lithium-Ion (Li-Ion)
Batterityp: Lithium-Ion-Polymeer
Laddbart batteri: Ja
Antal ljuseffekter: 6
Ljuslägen: Blinking light, Continuous light
Axelremsmaterial: Silicone
Drifttid (blixt): 20 uur
Antal LED-lampor: 1
Lätt applicering: Day, Night
Ljusflöde (frontljus): 650 lm
Drifttid (kontinuerligt ljus): 4.5 uur

Behöver du hjälp?

Om du behöver hjälp med IFM DI5010 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer