IFM E30104 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM E30104 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Installation Instructions
Protective cover
E30101 / E30104
706012/00 05/2011
UK
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen • Germany
http://www.ifm.com • e-mail: info@ifm.com
2
C
BD
A
A: label; B: ventilation strip; C: O-ring; D: protective cover
Program the sensor before mounting the protective cover. After mounting the
programming buttons will no longer be accessible.
Mounting
Make sure that the interior of the protective cover and the sensor head are
clean. Slightly grease the O-ring with paste.
The paste must be suitable and approved for the application and compatible
with the O-ring.
Slip the protective cover onto the sensor head. Turn it so that the display of the
sensor remains visible.
NOTE: The protective cover must not be slipped over the type label of the sen-
sor. This affects the sealing effect. Reposition the type label, if necessary.
Remove the ventilation strip to ensure sealing.
Removal / Remounting
Slightly turn the cover and remove it.
Insert the ventilation strip before remounting (between the O-ring and the wall
of the protective cover). Use the original strip or a stable plastic strip with a
strength of max. 0.4 mm.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: E30104

Behöver du hjälp?

Om du behöver hjälp med IFM E30104 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer