IFM JN2100 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM JN2100 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Installation instructions
Inclination sensor JN
JN2100
JN2101
80254488/00 05/2016
UK
2
1 Functions and features
The 2-axis inclination sensor with CANopen interface enables angle levelling and
position detection of mobile machines.
Typical applications are, for example, the position detection of access platforms,
levelling of mobile cranes or set-up of mobile machines.
2-axis inclination sensors with a measuring range of:
JN2100: ±180° / 0...360°
JN2101: ±45°
2 Symbols used
Instructions
Important note
Non-compliance can result in malfunction or interference.
3 Installation
Disconnect the system from power before installation.
3.1 Fastening
Fasten the device using 4 M5 screws on a flat surface.
Screw material: steel or stainless steel.
3.2 Mounting surface
The housing must not be exposed to any torsional forces or mechanical stress.
Use compensating elements if there is no flat mounting surface available.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.
Disconnect the installation from power and connect the unit.
3
UK
The inclination sensors are fitted with two round 5-pole M12 connectors (A-coded).
The pin connection corresponds to CiA DR-303-1.
4
2 1
3
5
1: CAN_SHLD shield
2: CAN_V+ supply voltage 24 V DC
3: CAN_GND GND
4: CAN_H H bus cable
5: CAN_L L bus cable
M12 connector CAN-In
3
1 2
4
5
1: CAN_SHLD shield
2: CAN_V+ supply voltage 24 V DC
3: CAN_GND GND
4: CAN_H H bus cable
5: CAN_L L bus cable
M12 socket CAN-Out
5 Technical data
Detailed manuals, technical data and further information at www.ifm.com.
6 Maintenance, repair and disposal
The unit is maintenance-free.
Dispose of the device in accordance with the national environmental
regulations.
7 Approvals/standards
The CE declarations of conformity and approvals can be found at www.ifm.com.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: JN2100

Behöver du hjälp?

Om du behöver hjälp med IFM JN2100 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

IFM

IFM OT5012 Bruksanvisning

27 Oktober 2024
IFM

IFM SUH201 Bruksanvisning

26 Oktober 2024
IFM

IFM PI1003 Bruksanvisning

26 Oktober 2024
IFM

IFM AC1254 Bruksanvisning

21 Oktober 2024
IFM

IFM EVW027 Bruksanvisning

21 Oktober 2024
IFM

IFM EVC132 Bruksanvisning

20 Oktober 2024
IFM

IFM PT2400 Bruksanvisning

20 Oktober 2024
IFM

IFM O2D532 Bruksanvisning

20 Oktober 2024
IFM

IFM PA3027 Bruksanvisning

20 Oktober 2024
IFM

IFM TW2001 Bruksanvisning

18 Oktober 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer