IFM KI5037 Bruksanvisning

IFM Inte kategoriserad KI5037

Läs nedan 📖 manual på svenska för IFM KI5037 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/3
Operating instructions
(Safety-related part ATEX)
Capacitive NAMUR sensors
KI-2015-N/NI*
706138 / 00 01 / 2012
UK
2
Remarks for safe use in hazardous areas
Functions and features
• Use in hazardous areas according to the classification
II 1G
(group II, category 1G, apparatus for gas atmosphere)
The standards IEC 60079-0:2011, IEC 60079-11: 2011, IEC 60079-26: 2006 + Corr 2009
are applied.
• Use in hazardous areas according to the classification
II 1D
(group II, category 1D, apparatus for dust atmosphere).
The standards IEC 60079-0:2011, IEC 60079-11:2011 are applied.
• EC Type Test Certificate
DMT 01 ATEX E020
• Marking
II 1G Ex ia IIB T6 Ga Ta: - 20°C to 60°C
II 1D Ex ia IIIC T90°C Da
Installation / Set-up
The units must only be installed, connected and set up by qualified staff. The qualified staff
must have knowledge of protection classes, regulations and provisions for apparatus in
hazardous areas.
Check whether the classification (see "Marking" above and marking on the unit) is suitable
for the application.
• Connection only to intrinsically safe switching amplifiers which are approved with the EC
type test certificate and do not exceed the following maximum values:
Ui = 15 V, Ii = 50 mA, Pi = 120 mW
• Permissible operating temperature of the application (referred to the maximum power
which can be supplied):
-20 ... +60°C
• Maximum effective internal inductance (Li) and capacitance (Ci):
Li = 1 H, Ci = 375 nFμ
The values apply to potted cables which are 2 m long.
The following values are added for the cable unit versions KI**** with potted cable > 2m:
0.5 H (Li) / 160 pF (Ci) per metre of potted cable.μ
3
UK
Installation remarks / Mounting
• Adhere to the respective national regulations and provisions.
• Avoid electrostatic charging on plastic units and cables.
• Protect unit and cable against destruction.
• The unit is not suitable for installation in walls which separate zone 0 from zone 1.
Maintenance / Repair
The unit must not be modified nor can it be repaired. In case of a fault please contact the
manufacturer.
If needed, you can obtain the data sheet, EC type test certificate or EC declaration of
conformity from the manufacturer.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: KI5037

Behöver du hjälp?

Om du behöver hjälp med IFM KI5037 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad IFM Manualer

IFM

IFM KI0200 Bruksanvisning

31 Mars 2025
IFM

IFM AC200A Bruksanvisning

12 Mars 2025
IFM

IFM ME5016 Bruksanvisning

11 Mars 2025
IFM

IFM E30542 Bruksanvisning

11 Mars 2025
IFM

IFM PV2102 Bruksanvisning

10 Mars 2025
IFM

IFM AL2507 Bruksanvisning

11 Februari 2025
IFM

IFM MK5361 Bruksanvisning

10 Februari 2025
IFM

IFM AL2607 Bruksanvisning

10 Februari 2025
IFM

IFM AL1325 Bruksanvisning

7 Februari 2025
IFM

IFM AL1304 Bruksanvisning

7 Februari 2025

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

TomTom

TomTom GO Camper Tour (2nd Generation) Bruksanvisning

31 Mars 2025
AEG

AEG AirFry A9OOAFWM Bruksanvisning

31 Mars 2025
Atlona

Atlona AT-HDR-EX-70C-TX Bruksanvisning

31 Mars 2025
Parallels

Parallels Plesk Panel 11.5 Bruksanvisning

31 Mars 2025
Sunny

Sunny Fresh Art Easel Bruksanvisning

31 Mars 2025
Shure

Shure WA555 Bruksanvisning

30 Mars 2025
Einhell

Einhell ESS 9000-T Bruksanvisning

30 Mars 2025
Einhell

Einhell AV 10 Bruksanvisning

30 Mars 2025
WilTec

WilTec 60130 Bruksanvisning

30 Mars 2025
WilTec

WilTec 61462 Bruksanvisning

30 Mars 2025