IFM PI2817 Bruksanvisning

IFM Inte kategoriserad PI2817

Läs nedan 📖 manual på svenska för IFM PI2817 (33 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/33

Operating instructions

Electronic pressure sensor

PI28xx

8026 / 00 03 / 20190760

Contents

1 Preliminary note 4 ...................................................................................................

1.1 Symbols used 4 ................................................................................................

2 Safety instructions 4 ...............................................................................................

3 Functions and features 5 ........................................................................................

3.1 Applications ...................................................................................................5

4 Function ...............................................................................................................6

4.1 Operating modes 6 ...........................................................................................

4.1.1 2-wire operation 6 ....................................................................................

4.1.2 3-wire operation 6 ....................................................................................

4.2 Switching function (only for 3-wire operation) 7 ................................................

4.3 Analogue function 7 ..........................................................................................

4.4 Customer-specific calibration 8 ........................................................................

5 Installation..........................................................................................................10

5.1 Filter cover ................................................................................................... 11

6 Electrical connection .......................................................................................... 11

6.1 Connection for 2-wire operation 12 ..................................................................

6.2 Connection for 3-wire operation 12 ..................................................................

7 Operating and display elements 13 ........................................................................

8 Menu ..................................................................................................................14

8.1 Menu structure: main menu 14 .........................................................................

8.2 Explanation of the main menu 15 .....................................................................

8.3 Menu structure: level 2 (extended functions) 16 ...............................................

8.4 Explanation of the menu level 2 17 ..................................................................

8.5 Menu structure: level 3 (simulation) 18 .............................................................

8.6 Explanation of the menu level 3 19 ..................................................................

9 Parameter setting 20 ..............................................................................................

9.1 Parameter setting in general 20 .......................................................................

9.2 Configure display (optional) 22 .........................................................................

9.3 Set output signals 22 ........................................................................................

9.3.1 Set output functions 22 ............................................................................

9.3.2 Set switching limits 23 .............................................................................

9.3.3 Scale analogue value for OUT2 23 .........................................................

9.4 User settings (optional) 24 ................................................................................

9.4.1 Carry out zero point calibration 24 ..........................................................

9.4.2 Set output status in fault condition 24 ......................................................

9.4.3 Set delay for the switching outputs 25 .....................................................

9.4.4 Set output logic for the switching outputs 25 ...........................................

9.4.5 Set damping for the switching signal 25 ..................................................

9.4.6 Set damping for the analogue signal 25 ..................................................

9.4.7 Calibrate curve of measured values 25 ...................................................

9.5 Service functions 26 .........................................................................................

9.5.1 Read min/max values for the system pressure 26 ..................................

9.5.2 Reset all parameters to factory setting 26 ...............................................

9.6 Simulation function 26 ......................................................................................

9.6.1 Open menu level 3 (simulation) 26 ..........................................................

9.6.2 Set simulation value 27 ...........................................................................

9.6.3 Set time for simulation 27 ........................................................................

9.6.4 Start simulation 27 ...................................................................................

10 Operation .........................................................................................................28

10.1 Read the set parameters 28 ...........................................................................

10.2 Change the display in the Run mode 28 .......................................................

10.3 Self-diagnosis / error indications 28 ...............................................................

10.4 Setting ranges 31 ...........................................................................................

11 Factory setting 33 .................................................................................................

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	PI2817
Färg på produkten:	Wit
Vikt:	2600 g
Höjd:	240 mm
Internationell säkerhetskod (IP):	IP52
Instruktioner:	Ja
Monteringsverktyg:	Ja
Minneskortets maximala kapacitet:	64 GB
Ljudformat som stöds:	ADPCM, LC-AAC, PCM
Videoformat som stöds:	H.264, M-JPEG
Vormfaktor:	Dome
Placeringsstöd:	Binnen & buiten
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Monteringsmetod:	Plafond
Videolägen som stöds:	1080p
Maximal upplösning:	1920 x 1080 Pixels
Diameter:	198 mm
Typ av strömkälla:	Power over Ethernet (PoE)
Minimal belysning:	0.4 Lux
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	SD, SDHC, SDXC
Inbyggd hårddisk:	Nee
HTTPS-kryptering:	Ja
Ljudsystem:	2-weg
Zoomkapacitet:	240
Antal Ethernet LAN (RJ-45)-portar:	1
Brännvidd:	1.6 - 2.9 mm
Optisk sensorstorlek:	1/3 "
Bildsensortyp:	CMOS
Digital zoom:	12 x
Optisk zoom:	20 x
Kamerans slutartid:	1/4 - 1/33000 s
Kabelteknik:	10/100Base-T(X)
Förvaringstemperatur:	10 - 85 °C
Max 30 bilder per sekund:	30 fps
Nätverksprotokoll som stöds:	IPv4/v6, HTTP, HTTPSa, SSL/TLSa, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
IP-adressfilter:	Ja
Flashminne:	128 MB
Power over Ethernet (PoE):	Ja
PTZ-kontroll:	Ja
Panoreringsintervall:	0 - 360 °
Dag/nattläge:	Ja
Svänghastighet:	450 °/sec
Pannhastighet:	450 °/sec
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
AC-ingångsspänning:	100-240 V
AC-ingångsfrekvens:	60 Hz
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	-40 - 65 procent
Tiltvinkelområde:	0 - 180 °
Linsens betraktningsvinkel, horisontell:	62.98 °