IFM ST2609 Bruksanvisning

IFM Inte kategoriserad ST2609

Läs nedan 📖 manual på svenska för IFM ST2609 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

Installation Instructions

Flow monitor compact

701149/06 11/1999

1 Function and features

The flow monitor monitors liquid media. It senses whether there is a preset flow (=

medium flows) or not (= medium does not flow) and provides a switching signal.

2 Installation

The sensor tip must be completely immersed in the medium.

• In the case of horizontal pipes mount the unit from the side, if possible (fig. 1).

- When the unit is to be mounted at the bottom of the pipe, it should be free

from deposits.

- When the unit is to be mounted at the top of the pipe, it should be completely

filled with the medium to be monitored.

• In the case of vertical pipes mount the unit in a place where the medium flows

upwards (fig. 2).

fig. 1 fig. 2

A = 15 mm for units with M12 x 1 and 1/4" thread

A = 23 mm for units with 1/2" thread.

B = packing washer

To avoid malfunction a minimum

distance between the flow monitor and

bends, valves, changes in cross-section

or such like must be observed:

Min. 5 x pipe diameter upstream (A),

min. 3 x pipe diameter downstream (B).

fig. 3

min.

5 x D

min.

3 x D

3 Electrical connection

The unit must only be mounted by an electrician.

The national and international regulations for the installation of electrical

equipment must be observed.

Voltage supply for units up to 60 V to EN50178, SELV, PELV.

►Disconnect power.

►Connect the unit (wiring: see type label).

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	ST2609
Färg på produkten:	Wit
Husmaterial:	Metaal
Monteringsmetod:	Plafond
Lämplig för skärmstorlekar:	32 "
Maximal viktkapacitet:	91 kg
Horisontellt vridbar:	0 - 360 °
Tiltvinkelområde:	-5 - 25 °