Impact RST-001 Bruksanvisning

Läs nedan 📖 manual på svenska för Impact RST-001 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
www.impactstudiolighting.com
RST-001
Posing Stool
ASSEMBLY INSTRUCTIONS
Parts List
1 – seat cushion
1 – mounting plate
4 – 1/ screws
1 – pneumatic cylinder
1 – pedestal base
5 – pedestal feet
Specications
Weight capacity: 220.5 lb. (100 kg)
Height: 20 to 30 in. (50.8 to 76.2 cm)
Base diameter: 22 in. (55.9 cm)
Seat diameter: 14 in. (35.6 cm)
Feet type: Pedestal
Material: Chrome-plated steel cylinder,
high-impact nylon
seat cushion
1/2˝ screws
mounting
plate
pneumatic
cylinder
pedestal
base
pedestal
feet
Step One
Remove all the parts from the carton and make
certain you have all the items in the parts list
above and in the correct quantity.
Step Two
Insert the pedestal feet into the pedestal base.
Be sure all feet are inserted securely.
Step Three
Insert the pneumatic cylinder into the
pedestal base.
Step Four
Attach the mounting plate to the seat
cushion using the four 1/2˝ screws.
Tighten the screws rmly.
Step Five
Push the mounting plate and the seat
cushion down onto the pneumatic cylinder
until it is secure.
To adjust the seat height, pull up on the lever and
either push down on the seat to lower or pull up
to raise the height. Make certain all screws are
tightened fully before using this stool.
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The warranty providers responsibility with
respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its intended manner and in its
intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider.
If the product has been discontinued, the warranty provider reserves the right to replace it with a model
of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER
MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specic legal rights, and you may also have additional rights
that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Impact along with the
RMA number and proof of purchase. Shipment of the defective product is at the purchasers own risk
and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service
at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2020 Gradus Group LLC. All Rights Reserved.
IMPACT
®
A Gradus Group Brand
GG3

Produktspecifikationer

Varumärke: Impact
Kategori: Inte kategoriserad
Modell: RST-001

Behöver du hjälp?

Om du behöver hjälp med Impact RST-001 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Impact Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer