Indesit XWE 101484 Bruksanvisning

Indesit tvättmaskin XWE 101484

Läs nedan 📖 manual på svenska för Indesit XWE 101484 (84 sidor) i kategorin tvättmaskin. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/84
1
GB
WASHING MACHINE
Instructions for use
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 4
Cutting off the water and electricity supplies
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 5
General safety
Disposal
Opening the porthole door manually
Description of the washing machine, 6-7
Control panel
Display
Running a wash cycle, 8
Wash cycles and options, 9-10
Table of wash cycles
Wash options
Push & Wash
Detergents and laundry, 11-12
Detergent dispenser drawer
Bleach cycle
Preparing the laundry
Special wash cycles
Load balancing system
Troubleshooting, 13
Service, 14
XWE 101484
English,1
GB FR
Français,15
DE
Deutsch,29
IT
Italiano,43
TR
Türkçe,57
NL
Nederlands,73
2
GB
! This instruction manual should be kept in a safe
place for future reference. If the washing machine
is sold, transferred or moved, make sure that the
instruction manual remains with the machine so
that the new owner is able to familiarise himself/
herself with its operation and features.
! Read these instructions carefully: they contain
vital information relating to the safe installation
and operation of the appliance.
Unpacking and levelling
Unpacking
1. Remove the washing machine from its packaging.
2. Make sure that the washing machine has
not been damaged during the transportation
process. If it has been damaged, contact the
retailer and do not proceed any further with the
installation process. 3. Remove the 4
protective screws (used
during transportation)
and the rubber washer
with the corresponding
spacer, located on
the rear part of the
appliance (see figure).
4. Close off the holes using the plastic plugs
provided.
5. Keep all the parts in a safe place: you will need
them again if the washing machine needs to be
moved to another location.
! Packaging materials should not be used as
toys for children.
Levelling
1. Install the washing machine on a flat sturdy
floor, without resting it up against walls, furniture
cabinets or anything else.
2. If the floor is not
perfectly level,
compensate for
any unevenness by
tightening or loosening
the adjustable front
feet (see figure); the
angle of inclination,
measured in relation
to the worktop, must
not exceed 2°.
Levelling the machine correctly will provide
it with stability, help to avoid vibrations and
excessive noise and prevent it from shifting
while it is operating. If it is placed on carpet or
a rug, adjust the feet in such a way as to allow
a sufficient ventilation space underneath the
washing machine.
Connecting the electricity and
water supplies
Connecting the water inlet hose
1. Connect the supply
pipe by screwing it
to a cold water tap
using a ¾ gas threaded
connection (see figure).
Before performing the
connection, allow the
water to run freely until
it is perfectly clear.
2. Connect the
inlet hose to the
washing machine by
screwing it onto the
corresponding water
inlet of the appliance,
which is situated on
the top right-hand side
of the rear part of the
appliance (see figure).
3. Make sure that the hose is not folded over
or bent.
! The water pressure at the tap must fall within
the values indicated in the Technical details table
(see next page).
! If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.
! Never use second-hand hoses.
! Use the ones supplied with the machine.
Installation
3
GB
Connecting the drain hose
Connect the drain
hose, without bending
it, to a drainage duct or
a wall drain located at a
height between 65 and
100 cm from the floor;
alternatively, rest it on
the side of a washbasin
or bathtub, fastening
the duct supplied to
the tap (see figure).
The free end of the
hose should not be
underwater.
! We advise against the use of hose extensions;
if it is absolutely necessary, the extension must
have the same diameter as the original hose and
must not exceed 150 cm in length.
Electrical connections
Before plugging the appliance into the electricity
socket, make sure that:
•the socket is earthed and complies with all
applicable laws;
•thesocketisabletowithstandthemaximum
power load of the appliance as indicated in the
Technical data table (see opposite);
•thepowersupplyvoltagefallswithinthevalues
indicated in the Technical data table (see
opposite);
the socket is compatible with the plug of
the washing machine. If this is not the case,
replace the socket or the plug.
! The washing machine must not be installed
outdoors, even in covered areas. It is extremely
dangerous to leave the appliance exposed to
rain, storms and other weather conditions.
! When the washing machine has been installed,
the electricity socket must be within easy reach.
! Do not use extension cords or multiple sockets.
! The cable should not be bent or compressed.
! The power supply cable must only be replaced
by authorised technicians.
Warning! The company shall not be held responsible
in the event that these regulations are not respected.
The first wash cycle
Once the appliance has been installed, and before
you use it for the first time, run a wash cycle
with detergent and no laundry, using the wash
cycle “Auto Clean” (see “Cleaning the washing
machine”).
65 - 100 cm
Technical data
Model XWE 101484
Dimensions width 59.5 cm
height 85 cm
depth 60,5 cm
Capacity from 1 to 10 kg
Electrical
connections
please refer to the technical
data plate fixed to the ma-
chine
Water
connections
maximum pressure
1 MPa (10 bar)
minimum pressure
0.05 MPa (0.5 bar)
drum capacity 71 litres
Spin speed up to 1400 rotations per minute
Test wash
cycles in
accordan-
ce with
directives
1061/2010
and
1015/2010
Programme 8:
Cotton Standard 60°.
Programme 9:
Cotton Standard 40°.
This appliance conforms to
the following EC Directives:
- 2004/108/EC (Electroma-
gnetic Compatibility)
- 2006/95/EC (Low Voltage)
- 2012/19/EU (WEEE)

Produktspecifikationer

Varumärke: Indesit
Kategori: tvättmaskin
Modell: XWE 101484
Enhetsplacering: Volledig ingebouwd
Typ av operation: Knoppen
Inbyggd display: Ja
Vikt: 43812 g
Bredd: 598 mm
Djup: 550 mm
Höjd: 815 mm
Nettoskatt: 2400 W
Antal platsinställningar: 13 couverts
Torksystem: Warmtewisselaar
Dörrfärg: Niet van toepassing
Sladdlängd: 1.75 m
Fördröjd starttimer: Ja
Startfördröjning: 24 uur
Indikering av återstående tid: Ja
Wi-Fi-kontroll: Ja
Cykelns längd: 295 min
Ljudnivå: 46 dB
Energie-efficiëntieklasse: D
Belysning inuti: Ja
Installationsfackets bredd: 600 mm
Installationsfack djup: 550 mm
Vattenförbrukning per cykel: 9.5 l
Nuvarande: 10 A
Installationsfack höjd (min): 815 mm
Självrengörande: Ja
Bulleremissionsklass: C
Antal tvättprogram: 6
Energiförbrukning per 100 cykler: 84 kWu
Produktstorlek: Volledige grootte (60 cm)
Typ av bästa fack: Mand
Saltindikator: Ja
Doseringsassistent: Ja
Antal temperaturinställningar: 6
AquaStop-funktion: Ja
AquaSensor funktion: Ja
Glasskydd: Ja
Belastningssensor: Ja
Tvättprogram: Auto 45-65°C, Chef 70°C, Eco 50°C, Glass/delicate, Intensive, Pre-wash, Quick 60°C
Energiförbrukning per cykel: 0.92 kWu
Avloppsslangens längd: 1.9 m
Vattentillförselslangens längd: 1.65 m
Övre korg justerbar höjd: Ja
Installationsfack höjd (max): 875 mm
Maximal varmvattentemperatur: 60 °C
Temperatur (max): 70 °C
Strömförbrukning (behåll den på): 0.5 W
Strömförbrukning (när avstängd): 0.5 W
Inbyggd vattenavhärdare: Ja
Type beeldscherm: LED
Energieffektivitetsskala: A tot G

Behöver du hjälp?

Om du behöver hjälp med Indesit XWE 101484 ställ en fråga nedan och andra användare kommer att svara dig




tvättmaskin Indesit Manualer

tvättmaskin Manualer

Nyaste tvättmaskin Manualer