Indesit XWSA 61253 W EU Bruksanvisning

Indesit tvättmaskin XWSA 61253 W EU

Läs nedan 📖 manual på svenska för Indesit XWSA 61253 W EU (84 sidor) i kategorin tvättmaskin. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/84

Contents

Installation, 2-3

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 4

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 5

General safety

Load balancing system

Disposal

Description of the washing machine

and starting a wash cycle, 6-7

Control panel

Indicator lights

Starting a wash cycle

Wash cycles, 8

Push & Wash

Table of wash cycles

Personalisation, 9

Setting the temperature

Setting the spin speed

Functions

Detergents and laundry, 10

Detergent dispenser drawer

Bleach cycle

Preparing the laundry

Garments requiring special care

Troubleshooting, 11

Service, 12

XWSA 61253

Instructions for use

WASHING MACHINE

English,1

GB FR

Français,13

Български,37

Slovensky,61

Polski,25

Česky,49

Deutsch,73

Levelling the machine correctly will provide

it with stability, help to avoid vibrations and

excessive noise and prevent it from shifting

while it is operating. If it is placed on carpet or

a rug, adjust the feet in such a way as to allow

a sufficient ventilation space underneath the

washing machine.

Connecting the electricity and water

supplies

Connecting the water inlet hose

1. Connect the inlet

hose by screwing it

to a cold water tap

using a 3/4 gas thre-

aded connection (see

figure).

Before performing the

connection, allow the

water to run freely un-

til it is perfectly clear.

2. Connect the inlet

hose to the washing

machine by screwing

it onto the correspon-

ding water inlet of the

appliance, which is

situated on the top

right-hand side of the

rear part of the ap-

pliance . (see figure)

3. Make sure that the hose is not folded over

or bent.

! The water pressure at the tap must fall within

the range of values indicated in the Technical

data table (see next page).

! If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

Installation

! This instruction manual should be kept in a

safe place for future reference. If the washing

machine is sold, transferred or moved, make

sure that the instruction manual remains with

the machine so that the new owner is able to

familiarise himself/herself with its operation

and features.

! Read these instructions carefully: they con-

tain vital information relating to the safe instal-

lation and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its

packaging.

2. Make sure that the washing machine has

not been damaged during the transportation

process. If it has been damaged, contact the

retailer and do not proceed any further with

the installation process.

3. Remove the pro-

tective screws (used

during transportation)

and the rubber wa-

sher with the cor-

responding spacer,

located on the rear

part of the appliance

( ).see figure

4. Close off the holes using the plastic plugs

provided.

5. Keep all the parts in a safe place: you will

need them again if the washing machine ne-

eds to be moved to another location.

! Packaging materials should not be used as

toys for children.

Levelling

1. Install the washing machine on a flat sturdy

floor, without resting it up against walls, furni-

ture cabinets or anything else.

2. If the floor is not

perfectly level, com-

pensate for any une-

venness by tightening

or loosening the

adjustable front feet

( ); the angle see figure

of inclination, measu-

red in relation to the

worktop, must not

exceed 2°.

Connecting the drain hose

Connect the drain

hose, without bending

it, to a drain duct or

a wall drain situated

between 65 and 100

cm from the floor;

alternatively, placed

it over the edge of a

basin, sink or tub, fa-

stening the duct sup-

plied to the tap (see

figure). The free end

of the hose should

not be underwater.

! We advise against the use of hose extensions;

if it is absolutely necessary, the extension must

have the same diameter as the original hose

and must not exceed 150 cm in length.

Electrical connections

Before plugging the appliance into the electri-

city socket, make sure that:

• the socket is earthed and complies with all

applicable laws;

• the socket is able to withstand the maximum

power load of the appliance as indicated in the

Technical data table (see opposite);

• the power supply voltage falls within the va-

lues indicated in the Technical data table (see

opposite);

• the socket is compatible with the plug of the

washing machine. If this is not the case, repla-

ce the socket or the plug.

! The washing machine must not be installed

outdoors, even in covered areas. It is extremely

dangerous to leave the appliance exposed to

rain, storms and other weather conditions.

! When the washing machine has been instal-

led, the electricity socket must remain within

easy reach.

65 - 100 cm

! Do not use extension cords or multiple sockets.

! The cable should not be bent or compressed.

! The power supply cable must only be repla-

ced by authorised technicians.

Warning! The company shall not be held re-

sponsible in the event that these standards are

not observed.

The first wash cycle

Once the appliance has been installed, and

before you use it for the first time, run a wash

cycle with detergent and no laundry, using the

wash cycle auto clean (see “Cleaning the wa-

shing machine”).

Technical data

Model XWSA 61253

Dimensions

width 59.5 cm

height 85 cm

depth 42,5 cm

Capacity from 1 to 6 kg

Electrical

connections

please refer to the technical

data plate fixed to the ma-

chine

Water

connections

maximum pressure

1 MPa (10 bar)

minimum pressure

0.05 MPa (0.5 bar)

drum capacity 40 litres

Spin speed up to 1200 rotations per minute

Test wash

cycles in

accordan-

ce with

directives

1061/2010

and

1015/2010.

Programme 8:

Cotton Standard 60°.

Programme 9:

Cotton Standard 40°.

This appliance conforms to

the following EC Directives:

- 2004/108/EC (Electroma-

gnetic Compatibility)

- 2006/95/EC (Low Voltage)

- 2012/19/EU (WEEE)

Produktspecifikationer

Varumärke:	Indesit
Kategori:	tvättmaskin
Modell:	XWSA 61253 W EU

Behöver du hjälp?

Om du behöver hjälp med Indesit XWSA 61253 W EU ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

tvättmaskin Indesit Manualer

Indesit WD 0 WI Bruksanvisning

23 Oktober 2024

Indesit WIT51 Bruksanvisning

21 Oktober 2024

Indesit IM 762 MY TIME EE Bruksanvisning

21 Oktober 2024

Indesit W 144 XS Bruksanvisning

20 Oktober 2024

Indesit wil 105 s Bruksanvisning

19 Oktober 2024

Indesit XWD 61452 Bruksanvisning

17 Oktober 2024

Indesit WIE 107 X Bruksanvisning

14 Oktober 2024

Indesit LIMPIA TRE Bruksanvisning

11 Oktober 2024

Indesit WIXE 167 (UK) Bruksanvisning

11 Oktober 2024

Indesit XWE 71283X WWGG PL Bruksanvisning

9 Oktober 2024

tvättmaskin Manualer

Nyaste tvättmaskin Manualer

AEG LTR8C6152A Bruksanvisning

27 Oktober 2024

Samsung WW90T534ATW Bruksanvisning

27 Oktober 2024

Samsung WW10T754DBX Bruksanvisning

27 Oktober 2024

New Pol XF6600EL Bruksanvisning

27 Oktober 2024

Zanussi ZR8441WF Bruksanvisning

27 Oktober 2024

Philco PLDS 1063 Crown Bruksanvisning

27 Oktober 2024

Candy CO 4104TWM/1-S Bruksanvisning

27 Oktober 2024

New Pol XS 271EV Bruksanvisning

27 Oktober 2024

Corberó CLAV822 Bruksanvisning

27 Oktober 2024

Candy CBD485D2CE/1-80 Bruksanvisning

27 Oktober 2024