Intellinet 711951 Bruksanvisning

Läs nedan 📖 manual på svenska för Intellinet 711951 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
M6
Attention:
e
M6
19 FLAT PACK
RACK CABINET
ASSEMBLY
INSTRUCTIONS
North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677
USA
Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221
Taiwan
Europe
IC Intracom Europe
Löhbacher Str. 7
D-58553 Halver
Germany
© IC Intracom. All rights reserved. Intellinet is a trademark of IC Intracom, registered in the U.S. and other countries. For specifications, go to intellinet-network.com. For warranty information, go to intellinet-network.com/warranty.
1 Front door
2 Front frame
3 Side frame x2
4 Side panel x2
5 Top
6 Back frame
7 Mounting rail x2
8 Bottom
Remove the side panels ( ) from the side 4
frames ( ) and set them aside.3
1 2 Use the included key to pull open the
door ( ) and remove it from the front 1
frame ( ) by pushing down on the latch.2
3 Use the 4 included M5 screws to attach a
mounting rail ( ) to each side frame ( ).7 3
4 Use 4 of the included M6 screws (use 6 for
larger units) to attach each of the 2 side
frames ( ) to the back frame ( ).3 6
5 Slide the top ( ) and the bottom ( ) into 5 8
place.
Note: screws
to the front
6 Use 4 of the included M6 screws (use 6 for
larger units) to attach the front frame ( ) 2
to the assembly.
7 Install the 2 side panels ( ).4
8 Reverse Step 2 by inserting the lower
door latch into the frame and then
pushing down on the upper door latch
to install the front door ( ). Note: Once 1
the unit is assembled, check that all
corners are square to ensure that the
door opens and closes properly.
Wallmount Cabinet instructions ICG.indd 1 7/30/14 2:22 PM
M6
Attention:
de
M6
19 FLAT PACK
WANDVERTEILER
MONTAGE-
ANLEITUNG
Die Spezifikationen finden Sie auf intellinet-network.com.. Garantieinformationen finden Sie hier unter intellinet-network.com/warranty.
1 Fronttür
2 Frontrahmen
3 Seitenrahmen x2
4 Seitenwand x2
5 Oberseite
6 Rückseitiger Rahmen
7 Montageschienen x2
8 Bodenplatte
Nehmen Sie die Seitenwände ( ) vom 4
Seitenrahmen ( ) ab und legen Sie sie zur 3
Seite.
1 2 Öffnen Sie die Tür ( ) mit dem 1
beiliegenden Schlüssel und nehmen Sie
sie vom Frontrahmen ( ) ab, indem Sie 2
den Scharnierstift nach unten drücken.
3 Verwenden Sie 4 beiliegende M5-
Schrauben, um eine Montageschiene ( ) 7
an jedem Seitenrahmen ( ) zu befestigen.3
4 Verwenden Sie 4 beiliegende M6-Schrauben
(6 für größere Schränke), um die beiden
Seitenrahmen ( ) jeweils am rückseitigen 3
Rahmen ( ) zu befestigen.6
5 Schieben Sie die Oberseite ( ) und die 5
Bodenplatte ( ) in Position.8
Hinweis:
Schrauben
nach vorn
6 Verwenden Sie 4 beiliegende M6-
Schrauben (6 für größere Schränke), um
den Frontrahmen ( ) an der Konstruktion 2
zu befestigen.
7 Montieren Sie die 2 Seitenwände ( ).4
8 Setzen Sie die Tür ( ) aus Schritt 2 1
wieder ein, indem Sie den unteren
Scharnierstift unten im Rahmen platz-
ieren und den oberen an der Oberseite
einsetzen. Hinweis: Sobald der Schrank
montiert ist, prüfen Sie, dass alle Ecken
genau rechtwinklig verbaut sind, damit
die Tür ordnungsgemäß geöffnet und
geschlossen werden kann.
Wallmount Cabinet instructions ICG.indd 2 7/30/14 2:22 PM

Produktspecifikationer

Varumärke: Intellinet
Kategori: Inte kategoriserad
Modell: 711951

Behöver du hjälp?

Om du behöver hjälp med Intellinet 711951 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Intellinet Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer