Invicta Pro Diver 20288 Bruksanvisning

Invicta Titta Pro Diver 20288

Läs nedan 📖 manual på svenska för Invicta Pro Diver 20288 (6 sidor) i kategorin Titta. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
Movement Caliber : VD53
Presentation
Display Elements
Minutes Hand
Hour Hand
Stopwatch
Minutes Hand
(Move in second
increments)
Second Hand
Stopwatch
Minutes Hand
(Move in second
increments)
24-Hour Hand
(Indicates the time on
a 24-Hour basis)
Date Window
1 2
Crown Positions
1: Date setting
2: Time setting
Push Button B
In stopwatch function:
Split / Split release / Reset
Control Buttons
Push Button A
In stopwatch function:
Start / Stop
0
· The measurement time indicated by the stopwatch hands move independently of the
center hands.
·Chrono1/10 sec :The stopwatch1/10secondhandmoves forarst minute.Afterone
minute, it indicates the measurement time when it is stopped.
INFO
Movement Caliber
VD53
Movement Caliber : VD53
Setting
Adjusting the Stopwatch Hand Position
Before setting the time, check if all the chronograph hands - second,
minute - are at the “0”(12 o’clock) position.
If the stopwatch is in use, press the buttons in the following order to
reset it, and then, check if the hands return to “0” position.
 (Fordetails,see“HOWTOUSETHESTOPWATCH”)
If the chronograph is counting : A > B
If the stopwatch is stopped : B
If the split time is displayed: B > A > B
If either of the stopwatch hands are not in the “0” position , reset them
following the procedure below
Pull the crown out to position 2. Push the crown back to the normal position.
PressbuttonAorBtoresetallstopwatch
hands to “0” position.
· The stopwatch minute hand moves
correspondingly with the stopwatch
second hand.
·The hands move quickly if the respective
buttons are kept pressed.
1.2
1.1 1.3
2.3
2.1
2.4
2.2
Movement Caliber : VD53
Setting
Time Setting
Before setting the time, check that the chronograph measurement
isstopped.
Donotsetthedatebetween9:00P.M.and1:00A.M,otherwisethe
day may not change properly. If it is necessary to set the date during
 thetimeperiod,rstlychangethetimetoanytimeoutsideit,setthe
date and then reset the correct time.
2.1 Pull out the crown to the position 1
2.2 Turn the crown clockwise until the preview day’s date appears.
2.3 Pull out the crown to the position 2 when the second hand is at the 12 o’clock position.
  Itwillstoponthespot.Setthehandstothedesiredtimeoftheday(makesureAM/PMis
set correctly) by turning the crown.
  When the crown is at the second click position, do not press any button. Otherwise the
chronograph hands will move.
2.4 Push the crown back in the normal position in accordance with a time signal.

Produktspecifikationer

Varumärke: Invicta
Kategori: Titta
Modell: Pro Diver 20288

Behöver du hjälp?

Om du behöver hjälp med Invicta Pro Diver 20288 ställ en fråga nedan och andra användare kommer att svara dig




Titta Invicta Manualer

Titta Manualer

Nyaste Titta Manualer