Invicta Speedway 22508 Bruksanvisning

Invicta Titta Speedway 22508

Läs nedan 📖 manual på svenska för Invicta Speedway 22508 (31 sidor) i kategorin Titta. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/31
INSTRUCT ON MANUALI AND WARRANTY
THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE
Long ago, we set out to continue Invicta’s original 1837 mission – to offer
magnificent Swiss timepieces at modest prices. In doing so, we gave birth
to a movement in the watch industry that is turning the balance of power
over to the consumer.
We hope you enjoy your new timepiece and carefully read the easy-to-use
instructions pertaining to it. By doing so, you will help give it a long life and
keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain
the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified
watchmaker to ensure the gaskets are in proper condition. This will help to
assure the precise operation and longevity of the piece. Please refer to our
Service Center information on our web site www.invictawatch.com.
QUARTZ, A MUTO AT
QUARTZ, A M IC, UTO AT
AN IND W MANUAL D WATCHES
A Quartz Watch is battery powered and does not require winding.
Eventually the battery will need to be replaced.
An Automatic Watch is a mechanical watch that winds itself and does
not require a battery. When worn daily, the movement of your wrist causes
the mainspring to wind progressively, eliminating the need for additional
winding. To start your automatic, you can hand wind it by rotating the
crown clockwise a number of turns while in its normal operating position
(screw down crowns will need to be unscrewedrst), or by swinging it side
to side for 30 seconds. We recommend housing an automatic in a watch
winder box.
A Manual Wind Watch is a mechanical watch that does not require a
battery, but can only be wound by hand. To wind it, turn the crown clock-
wise while it is in its normal operating position until you feel resistance.
This type of watch should be wound daily.
2
W T DOES THISHA INDICATE?
Many Invicta watches are equipped with features that go beyond the
telling of time and date. These functions are displayed on what are called
subdials, indicators, counters or zones. Your watch may have one or more
of these. Knowing them will be useful when identifying which instructions
pertain to your watch.
!
PLE NOTE . ASE Since dial designs and shapes vary, not all subdials
are perfectly round, or positioned in the same place.
4
W T DOES THISHA INDICATE?
24-Hour: often called a GMT or second time zone indicator,
the hand of this counter makes a full rotation in a 24-hour
period, thereby also indicating whether it is a.m. or p.m.
I Sun/Moon display.t is often coupled with a
Sun/Moon: indicates a.m. or p.m. through the
display of the sun or moon. It is often coupled
with a 24-hour indicator.
Moonphase: this display assures near perfect
synchronization with the lunation period, and only
needs adjusting every two and a half years, should
the watch never stop in that time.
Power Reserve: found on automatic watches,
this zone displays the hours of autonomy
remaining of a movement after it has reached
its winding peak.
6
WHICH I
w w w. i nv ic t aw a t ch . c o m
8
WATCHES WITH D TIME AN DATE
Setting the ime and ateT D
1. Pull out the crown to position 1. The watch stops.
2. Turn the crown until you reach the correct date.
3. Pull out the crown to position 2.
4. Turn the crown until you reach the correct time.
5. Push the crown back into position 0. The watch will begin running again.
12
WATCWATCHES WITH , D TIME DAY AN DATE
Setting the ay and ateTime, D D
1. Pull out the crown to position 1.
2. Turn the crown clockwise until you reach the correct day.
3. Turn the crown counter clockwise until you reach the correct date.
4. Pull out the crown to position 2.
5. Turn the crown until you reach the correct time.
6. Push the crown back into position 0. The watch will begin running again.
14
WATCHES WITH ALARM
Setting the ime and ateT D
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until yesterday’s date appears.
3. Pull out the crown to position 2. The second hand stops. The display
changes from alarm time to reference time.
4. Turn the crown until the correct date appears. Observe A PM clock M/
rhythm.
5. Continue to turn the crown until the correct time appears.
6. Push the crown back into position 0. The display changes from
reference to alarm time.
! PLE NOTE . ASE Resetting the time also requires the identical correction of
the reference time. Please refer to setting the reference time”.
16
WATCHES WITH ALARM
Setting the imeReference T
Parallel to the current time, the reference time runs in the background: the
alarm time refers itself to this reference time. Thus, resetting the time also
requires the identical correction of the reference time.If the reference time
is not synchronized with the current time, this results in the alarm signal
being emitted at a different time than the set alarm time.
1. Pull out the crown to position 2 . The second hand stops. The display
changes from alarm time to reference time. To set your watch to the
exact
second, the crown must be pulled out when the second hand is
in position 0.
18
WATCHES WITH ALARM
Setting the Alarm
1. Press the push-button for at least 2 seconds. Until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:
The reference time is moved forward until the push-button is released.
2. Switch alarm O ON/ FF: Press the push-button briefly.
2 beeps: Alarm switched ON
1 beep: FFAlarm switched O
20
CHRONOGRAPHS
Built-in stopwatch feature
A chronograph is a timepiece with a built-in stopwatch feature. With few
exceptions, Invicta chronographs tell the time, date and include three
subsidiary dials. These dials are often referred to as sub-dials, indicators,
counters, eyes or zones. Typically, they measure minutes, seconds and
tenths of a second.
The sub-dials that measure minutes and tenths of a second are part of the
stopwatch feature. The sub-dial that measures 60 seconds is in a constant
rotation and is also known as the small seconds.
22

Produktspecifikationer

Varumärke: Invicta
Kategori: Titta
Modell: Speedway 22508

Behöver du hjälp?

Om du behöver hjälp med Invicta Speedway 22508 ställ en fråga nedan och andra användare kommer att svara dig




Titta Invicta Manualer

Titta Manualer

Nyaste Titta Manualer