Invicta Star Wars 26271 Bruksanvisning

Invicta Titta Star Wars 26271

Läs nedan 📖 manual på svenska för Invicta Star Wars 26271 (6 sidor) i kategorin Titta. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

Movement Caliber : VD53

Presentation

Display Elements

Minutes Hand

Hour Hand

Stopwatch

Minutes Hand

(Move in second

increments)

Second Hand

Stopwatch

Minutes Hand

(Move in second

increments)

24-Hour Hand

(Indicates the time on

a 24-Hour basis)

Date Window

1 2

Crown Positions

1: Date setting

2: Time setting

Push Button B

In stopwatch function:

Split / Split release / Reset

Control Buttons

Push Button A

In stopwatch function:

Start / Stop

· The measurement time indicated by the stopwatch hands move independently of the

center hands.

·Chrono1/10 sec :The stopwatch1/10secondhandmoves forarst minute.Afterone

minute, it indicates the measurement time when it is stopped.

INFO

Movement Caliber

VD53

Movement Caliber : VD53

Setting

Adjusting the Stopwatch Hand Position

Before setting the time, check if all the chronograph hands - second,

minute - are at the “0”(12 o’clock) position.

• If the stopwatch is in use, press the buttons in the following order to

reset it, and then, check if the hands return to “0” position.

 (Fordetails,see“HOWTOUSETHESTOPWATCH”)

• If the chronograph is counting : A > B

• If the stopwatch is stopped : B

• If the split time is displayed: B > A > B

If either of the stopwatch hands are not in the “0” position , reset them

following the procedure below

Pull the crown out to position 2. Push the crown back to the normal position.

PressbuttonAorBtoresetallstopwatch

hands to “0” position.

· The stopwatch minute hand moves

correspondingly with the stopwatch

second hand.

· The hands move quickly if the respective

buttons are kept pressed.

1.2

1.1 1.3

2.3

2.1

2.4

2.2

Movement Caliber : VD53

Setting

Time Setting

• Before setting the time, check that the chronograph measurement

isstopped.

•Donotsetthedatebetween9:00P.M.and1:00A.M,otherwisethe

day may not change properly. If it is necessary to set the date during

 thetimeperiod,rstlychangethetimetoanytimeoutsideit,setthe

date and then reset the correct time.

2.1 Pull out the crown to the position 1

2.2 Turn the crown clockwise until the preview day’s date appears.

2.3 Pull out the crown to the position 2 when the second hand is at the 12 o’clock position.

  Itwillstoponthespot.Setthehandstothedesiredtimeoftheday(makesureAM/PMis

set correctly) by turning the crown.

  • When the crown is at the second click position, do not press any button. Otherwise the

chronograph hands will move.

2.4 Push the crown back in the normal position in accordance with a time signal.

Produktspecifikationer

Varumärke:	Invicta
Kategori:	Titta
Modell:	Star Wars 26271
Färg på produkten:	Zwart
Snäll:	AV-receiver
LED-indikatorer:	Link
Blåtand:	Nee
USB-kontakttyp:	Micro-USB B
Anslutningsteknik:	Bedraad
Maximal upplösning:	2048 x 1080 Pixels
Antal USB-anslutningar:	1
Certifiering:	CE
HDCP:	Ja
USB-version:	2.0
3D:	Ja
Material:	Metaal
Grafikupplösningar som stöds:	1920 x 1200 (WUXGA), 2048 x 1080
Max 30 bilder per sekund:	0 fps
DVI-utgångar:	1
Bandbreedte:	6.75 Gbit/s
Mottagare mått (B x D x H):	40 x 74 x 15 mm
Maximal-räckvidd:	10000 m
Wifi:	Nee
Strömförbrukning (typiskt):	0.8 W
Mottagarens vikt:	80 g
Fiberoptisk kontakt:	LC
Struktur för trådläge:	Single-mode
Utökad visningsidentifikationsdata (EDID):	Ja
Våglängder som stöds:	1310,1490,1550 nm
HDCP-genomföring:	Ja
Ingen videokomprimering:	Ja
Skydd-mot-elektrostatisk-urladdning-(ESD).:	Ja
Klass:	1M
Strömförbrukning (RX):	1.9 W
RS-232-genomföring:	Nee
Budget optisk förlust:	10 dB
EDID-emulering (TX):	Ja
OMA-sändarutgång:	8 dBm
OMA-mottagarens känslighet:	17 dBm