Invicta Subaqua 28005 Bruksanvisning

Invicta Titta Subaqua 28005

Läs nedan 📖 manual på svenska för Invicta Subaqua 28005 (31 sidor) i kategorin Titta. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/31

INSTRUCT ON MANUALI AND WARRANTY

THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE

Long ago, we set out to continue Invicta’s original 1837 mission – to offer

magniﬁcent Swiss timepieces at modest prices. In doing so, we gave birth

to a movement in the watch industry that is turning the balance of power

over to the consumer.

We hope you enjoy your new timepiece and carefully read the easy-to-use

instructions pertaining to it. By doing so, you will help give it a long life and

keep it operating at the high quality standards by which it was crafted.

These timepieces have been tested for water resistance. In order to maintain

the water resistance, be sure to always close the crown tightly after setting.

We also recommend having your timepiece checked every year by a certiﬁed

watchmaker to ensure the gaskets are in proper condition. This will help to

assure the precise operation and longevity of the piece. Please refer to our

Service Center information on our web site www.invictawatch.com.

QUARTZ, A MUTO AT

QUARTZ, A M IC, UTO AT

AN IND W MANUAL D WATCHES

A Quartz Watch is battery powered and does not require winding.

Eventually the battery will need to be replaced.

An Automatic Watch is a mechanical watch that winds itself and does

not require a battery. When worn daily, the movement of your wrist causes

the mainspring to wind progressively, eliminating the need for additional

winding. To start your automatic, you can hand wind it by rotating the

crown clockwise a number of turns while in its normal operating position

(screw down crowns will need to be unscrewed ﬁrst), or by swinging it side

to side for 30 seconds. We recommend housing an automatic in a watch

winder box.

A Manual Wind Watch is a mechanical watch that does not require a

battery, but can only be wound by hand. To wind it, turn the crown clock-

wise while it is in its normal operating position until you feel resistance.

This type of watch should be wound daily.

W T DOES THISHA INDICATE?

Many Invicta watches are equipped with features that go beyond the

telling of time and date. These functions are displayed on what are called

subdials, indicators, counters or zones. Your watch may have one or more

of these. Knowing them will be useful when identifying which instructions

pertain to your watch.

PLE NOTE . ASE Since dial designs and shapes vary, not all subdials

are perfectly round, or positioned in the same place.

W T DOES THISHA INDICATE?

24-Hour: often called a GMT or second time zone indicator,

the hand of this counter makes a full rotation in a 24-hour

period, thereby also indicating whether it is a.m. or p.m.

I Sun/Moon display.t is often coupled with a

Sun/Moon: indicates a.m. or p.m. through the

display of the sun or moon. It is often coupled

with a 24-hour indicator.

Moonphase: this display assures near perfect

synchronization with the lunation period, and only

needs adjusting every two and a half years, should

the watch never stop in that time.

Power Reserve: found on automatic watches,

this zone displays the hours of autonomy

remaining of a movement after it has reached

its winding peak.

WHICH I

w w w. i nv ic t aw a t ch . c o m

WATCHES WITH TIME ONLY

Setting the imeT

1. Pull out the crown to position 1. The watch stops.

2. Turn the crown until the correct time appears.

3. Push the crown back into position 0. The watch will begin running again.

WATCHES WITH D TIME AN DATE

Setting the ime and ateT D

1. Pull out the crown to position 1. The watch stops.

2. Turn the crown until you reach the correct date.

3. Pull out the crown to position 2.

4. Turn the crown until you reach the correct time.

5. Push the crown back into position 0. The watch will begin running again.

WATCWATCHES WITH , D TIME DAY AN DATE

Setting the ay and ateTime, D D

1. Pull out the crown to position 1.

2. Turn the crown clockwise until you reach the correct day.

3. Turn the crown counter clockwise until you reach the correct date.

4. Pull out the crown to position 2.

5. Turn the crown until you reach the correct time.

6. Push the crown back into position 0. The watch will begin running again.

WATCHES WITH ALARM

Setting the ime and ateT D

1. Pull out the crown to position 1. The watch continues to run.

2. Turn the crown until yesterday’s date appears.

3. Pull out the crown to position 2. The second hand stops. The display

changes from alarm time to reference time.

4. Turn the crown until the correct date appears. Observe A PM clock M/

rhythm.

5. Continue to turn the crown until the correct time appears.

6. Push the crown back into position 0. The display changes from

reference to alarm time.

! PLE NOTE . ASE Resetting the time also requires the identical correction of

the reference time. Please refer to “setting the reference time”.

WATCHES WITH ALARM

Setting the imeReference T

Parallel to the current time, the reference time runs in the background: the

alarm time refers itself to this reference time. Thus, resetting the time also

requires the identical correction of the reference time.If the reference time

is not synchronized with the current time, this results in the alarm signal

being emitted at a different time than the set alarm time.

1. Pull out the crown to position 2 . The second hand stops. The display

changes from alarm time to reference time. To set your watch to the

exact

second, the crown must be pulled out when the second hand is

in position 0.

WATCHES WITH ALARM

Setting the Alarm

1. Press the push-button for at least 2 seconds. Until the small minute

hand jumps forward one minute and setting mode is activated.

Short pressing: Less than 1 second:

The reference time is moved forward by the minute.

Medium pressing: 1-2 seconds:

The reference time is moved forward by the hour.

Long pressing: Longer than 2 seconds:

The reference time is moved forward until the push-button is released.

2. Switch alarm O ON/ FF: Press the push-button brieﬂy.

2 beeps: Alarm switched ON

1 beep: FFAlarm switched O

CHRONOGRAPHS

Built-in stopwatch feature

A chronograph is a timepiece with a built-in stopwatch feature. With few

exceptions, Invicta chronographs tell the time, date and include three

subsidiary dials. These dials are often referred to as sub-dials, indicators,

counters, eyes or zones. Typically, they measure minutes, seconds and

tenths of a second.

The sub-dials that measure minutes and tenths of a second are part of the

stopwatch feature. The sub-dial that measures 60 seconds is in a constant

rotation and is also known as the small seconds.

CHRONOGRAPHS

Setting the ime and ate . fterT D A a Battery Change

1. Pull out the crown to position 1. The watch continues to run.

2. Turn the crown until you reach yesterday’s date. If you are setting the

date between 9pm and 12pm, the date must be set to the following day as

dates set between these hours do not automatically change at midnight.

3. Pull out the crown to position 2. To set the time to the exact second,

it must be pulled out when the second hand is in position 0. The watch

stops.

4. Turn the crown until you reach the correct date.

5. Continue to turn the crown until you reach the correct time.

6. Push the crown back into position 0. To set the time to the exact second,

it must be pushed back into position 0 at the exact second.

CHRONOGRAPHS

Adjusting the Chronograph Hands to Zero Position

1. Pull out the crown to position 2. All three chronograph hands are in

their correct or incorrect zero position.

2. Keep push-button A and B depressed simultaneously for at least 2

seconds. The center stop-second rotates 360º and corrective mode is

activated.

Adjusting the center stop second

S Pingle step: ress push-button A 1 x short

C Pontinuous: ress push-button A 1 x long

CHRONOGRAPHS

Measuring ccumulated imeA T

1. Start: Press push-button A Start timing..

2. Stop: Press push-button A.

3. Restart: Press push-button A. Timing is resumed.

4. Stop: Press push-button A Final time is displayed. Accumulation of .

timing can be continued by pressing push-button A.

5. Reset: Press push-button B. The chronograph hands will be reset to their

zero positions.

CHRONOGRAPHS

Setting the imeT

1. Pull out the crown to position 2.

To set the time to the exact second, it must be pulled out when the second

hand is in position 0. The watch stops.

2. Turn the crown until you reach the correct time.

3. Push the crown back into position 0.

To set the time to the exact second, it must be pushed back into position

0 at the exact second.

CHRONOG

CHRONOGRAPHS WITH BIG DATE DAYAND

Invicta is one of the ﬁrst companies to use the Swiss-made Startech

5050.C, the world’s ﬁrst big date and day chronograph with three eyes. It

features small seconds at 3 o’clock, tenths of a second at 6 o’clock, and

30 minutes and, in some, 12 hours at 9 o’clock.

CHRONOG

CHRONOGRAPHS WITH BIG DATE DAYAND

Setting the Time, D Day and ate

1. Pull out the crown to position 1.

2. Turn the crown until you reach the correct date. If you change the date

between 9:00pm and 12:00pm, it must be set to the following day as

dates set between these hours do not automatically change at midnight.

3. Pull out the crown to position 2.

4. Turn the crown clockwise until you reach the correct time.

5. Turn the crown counterclockwise until you reach the correct day.

Push the crown back into position 0.

The watch will begin running again.

CHRONOG

CHRONOGRAPHS WITH BIG DATE DAYAND

Adjusting the Chronograph Hands to Zero Position

Before using the chronograph functions, please ensure that the crown is

in position 0 and the 4 chronograph hands are precisely at zero position

following activation of push-button B. Should this not be the case, the

positions of the hands must be adjusted.

1. Pull out the crown to position 1. All three chronograph hands are in

their correct or incorrect zero position.

2. Keep push-button A and B depressed simultaneously for at least 2

seconds. The center stop-second rotates 360º and corrective mode is

activated.

Adjusting the center stop second

S Pingle step: ress push-button A 1 x short

C Pontinuous: ress push-button A 1 x long

CHRONOG

CHRONOGRAPHS WITH BIG DATE DAYAND

Measuring Elapsed imeT

1. Start: Press push-button A. The center sweep hand will begin measuring

seconds.

2. Stop: Press push-button A how much time has elapsed. and read

3. Reset: Press push-button B. The chronograph hands will be reset to their

zero positions.

! PLE NOTE . ASE The center sweep hand should be used only as a function

of the chronograph and should not be kept running constantly in place

of the small seconds.

CHRONOG

CHRONOGRAPHS WITH BIG DATE DAYAND

Measuring ccumulated imeA T

1. Start: Press push-button A. The center sweep hand will begin measuring

seconds.

2. Stop: P A Read the 3 chronograph counters.ress push-button .

3. Resume timing: Press push-button A again.

4. Stop: P A Read the 3 chronograph counters.ress push-button .

5. Repeat this process as many times as needed.

6. Reset: Press push-button B. The chronograph hands will be reset to their

zero positions.

CHRONOGRAP

CHRONOGRAPHS WITH DATE DAY M, AND ONTH

Setting the Time, Date, Day and Month

1. Pull out the crown to position 1. The watch stops.

2. Turn the crown until you reach the correct time.

3. Push the crown back into position 0. To set the time to the exact

second, it must be pushed back in at the exact second. Please observe

A PM clock rythm. The watch will begin running again.M/

4. Press the corrector C until you reach the correct date. If you change

the date between 9:00pm and 12:00pm, it must be set to the following

day as dates set between these hours do not automatically change at

midnight.

5. Press the corrector D until you reach the correct day.

6. Press the corrector E until you reach the correct month.

CHRONOGRAP

CHRONOGRAPHS WITH DATE DAY M, AND ONTH

Setting the Time, D Date and ay

1. Pull out the crown to position 1.

2. Turn the crown until you reach the correct date. If you change the date

between 9:00pm and 12:00pm, it must be set to the following day as

dates set between these hours do not automatically change at midnight.

3. Pull out the crown to position 2.

4. Turn the crown clockwise until you reach the correct time.

5. Turn the crown counterclockwise until you reach the correct day.

Push the crown back into position 0.

The watch will begin running again.

CHRONOGRAP

CHRONOGRAPHS WITH DATE DAY M, AND ONTH

Measuring ccumulated imeA T

1. Start: Press push-button A Start timing..

2. Stop: P A.ress push-button

3. Restart: Press push-button A. Timing is resumed.

4. Stop: P A Final time is displayed. Accumulation of ress push-button .

timing can be continued by pressing push-button A.

5. Reset: P The three chronograph hands will be reset ress push-button B.

to their zero positions.

WARRANTY

INFOR IONMAT

Your Invicta timepiece is backed by a comprehensive 1-year Warranty from

date of purchase. This covers repairs due to failure or breakdown of the

movement and all its components, as well as the crown, dial, markers, hands

and water resistant pressure. It does not cover scratches to the crystal, case,

metal band, leather, microﬁber, or rubber straps or any damage that results

from normal wear and tear.

You also have the option of purchasing our Invicta P Plan extended latinum

4-year Warranty. The information for both warranties can be found in your

gift box or by calling 1-866- TA.INVIC

Each genuine Invicta timepiece purchased from an E Invicta Retailer is lite

in its original and tested condition and should only be serviced by qualiﬁed

professionals at the place of purchase or at the Invicta Service Center in

accordance with the terms of the Invicta Warranties.

WARRANTY

INFOR IONMAT

Invicta watches are designed to withstand the most demanding conditions

for a very long time. Every care is taken to ensure that your watch meets

the highest standards before it leaves the workshop.

Should you discover that, despite our rigorous attempts to achieve this level

of quality your watch is not functioning properly during the warranty period

or after, simply send it to our Service Center for correction of the problem.

Although our main concern lies in minimizing the time that a watch is in

service, it is important for our clients to understand that every watch sent in for

service is thoroughly inspected for faults in craftsmanship, material damage,

movement-related irregularities, as well as other factors that could have an

impact on the overall appearance and performance of the watch.

When all apparent problems are sorted out, your watch will enter a

two-week

testing period, during which the accuracy of the movement is

observed and recorded day by day. Should your watch function properly at the

conclusion of the testing period, it will be sent to you immediately. Should the

SHIPPING

INFOR IONMAT

! P ASE NO E:LE T

If you are sending your watch to the Invicta Service C and it has an enter

exotic strap, you must remove the strap ﬁrst, or we cannot accept the

shipment. It will be returned to you.

The strict laws of the U.S. Government Fish and W Service prohibit ildlife

the shipping of exotic species without proper documentation. This includes

alligator, crocodile, snake, Ostrich, and ﬁsh, such as stingrays or Salmon.

Please note that genuine leather straps, synthetic straps, leather embossed

straps, and metal bands are excluded from this policy and you may keep

those straps attached.

Your watch may be forwarded to one of many Invicta Service Centers around

the world according to the origin of your watch. In order to avoid any delays

we request that you REMOVE ANY TIC STRAPS MAIL ONLY THEXO and E

WATCH FOR SERV E. CASE IC

SHIPPING INFOR IONMAT

! P ASE NO E:LE T

The owner will be responsible for shipping the watch to and from us for

service. A ﬂat rate of $25 will be charged, which should be submitted as a

money order.

MAIL TO: Invicta Service Center

1 Invicta Way (3069 Taft St.)

Hollywood Florida, 33021

U.S.A.

As part of our commitment to superior service, once your watch is received,

we will mail you a postcard advising you of your service case number.

This will give you the ability to refer to your particular case, as well as track

the progress online at www.invictawatch.com.

Produktspecifikationer

Varumärke:	Invicta
Kategori:	Titta
Modell:	Subaqua 28005
Typ av operation:	Buttons, Wireless
Färg på produkten:	Zwart
Timer:	Ja
Vikt:	479 g
Bredd:	210 mm
Djup:	81 mm
Höjd:	135 mm
Vattennivåindikator:	Ja
Snäll:	Geurverspreider op basis van verdamping
Tillgångar:	14 W
Typ av strömkälla:	AC, DC
LED-bakgrundsbelysning:	Ja
Nattläge:	Ja
Antal per paket:	1 stuk(s)
Fjärrstyrd:	Ja
Spännande:	24 V
Automatisk-avstängning:	Ja
Strömindikatorlampa:	Ja
Fjärrkontroll ingår:	Ja
Produktdesign:	Overige
AC-ingångsspänning:	100 - 240 V
Lämplig för rumsvolymer upp till:	30 m³
Timerlängd (max):	2 uur
Varaktighet (min):	15 uur
Tank kapacitet:	0.24 l
Importtyp:	Tank