Irritrol DX3-SPED08 Bruksanvisning

Irritrol Kontroller DX3-SPED08

Läs nedan 📖 manual på svenska för Irritrol DX3-SPED08 (156 sidor) i kategorin Kontroller. Denna guide var användbar för 19 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/156
1
RAIN MASTER
®DX3 User Manual
Table of Contents
Table of Contents
Chapter 1: Introduction ..................................................................... 3
About the Controller .............................................................................3
About This Manual ...............................................................................5
Getting Help .........................................................................................6
Chapter 2: Overview ........................................................................... 7
The Faceplate ........................................................................................7
The Buttons ..........................................................................................8
The LEDs ..............................................................................................9
The Screen ............................................................................................9
Menu Navigation ................................................................................10
Chapter 3: Quick Start ..................................................................... 11
Setting Current Date and Time ..........................................................12
Creating a New Irrigation Schedule ....................................................12
Program Start Time .............................................................................13
Water Days .........................................................................................14
Station Run Times ..............................................................................15
Program Hold .....................................................................................16
% Adjust .............................................................................................17
Manual Operation ...............................................................................18
Chapter 4: Setup ............................................................................... 21
Flow 22 ....................................................................................................
Learn Flow/Current.............................................................................25
Omit by Date ......................................................................................26
Communication ..................................................................................27
Current Checks ...................................................................................30
Time/Date ...........................................................................................31
Firmware Update.................................................................................31
FLOW MAX .......................................................................................32
Station Count ......................................................................................32
Master Valves & Pumps ......................................................................33
Program Decoder ................................................................................34
Chapter 5: Program Entry ................................................................ 37
Start Times ..........................................................................................38
Water Days .........................................................................................38
Run Times ..........................................................................................39
Quick Stations .....................................................................................39
Program Hold .....................................................................................40
OPT INs .............................................................................................41
Erase/Reset ..........................................................................................43
% Adjust .............................................................................................43
Backup Programs 10 & 11 ..................................................................44
Chapter 6: Stations ........................................................................... 45
Flow 45 ....................................................................................................
Current................................................................................................46
Cycle & Soak ......................................................................................47
Chapter 7: Reports and Diagnostics ................................................. 49
Reports 49 ................................................................................................
Diagnostics - General ..........................................................................51
Diagnostics - Communications ...........................................................53
Communications .................................................................................55
4
RAIN MASTER
®DX3 User Manual
Chapter 1: Introduction
An expansive, 4.4” LCD back-lit display with rapid menu navigation and “digital
ink” for high visibility in the sun.
Integrated cabinet access lighting or “fridge light” and pivoting brackets for
improved setup and service access (select models).
Transparent, custom – fit plastic covers for all circuit boards for added protection
against the elements and pests.
Many system communication options, including cellular, UHF Radio, Ethernet-
to-Radio, Ethernet, Hardwire, WiFi and more!
Lightning protection up to 18kV.
Integrated amperage meter to enhance internal diagnostics and troubleshooting
Up to 21 simultaneous station-related operations
(sixteen valves, three MVs, and two pumps).
Scheduling and Programming Features
16 conventional programs with up to 12 start times per program
Exclusive DX series Individual Station Control (ISC™):
Treat every active station as an individual program
Customizable scheduling calendar with up to 48 exclusion days
Programmable MV and Station Delay
Global water window (Manual can override)
Maintenance and Alarm Diagnostic Capabilities
Flow monitoring. Overflow, underflow, unscheduled flow, and catastrophic
occurrence monitoring and reporting.
Electrical alarm with station shutdown and program advance for station/s over
current, shorts, damaged wires, and/or faulty solenoids.
Power outage restoration alarms.
LED indication for station outputs.
Electrical self diagnostic test to identify specific station output faults.
Manual test mode that can advance stations while displaying valve electrical
current and station flow data.
5
RAIN MASTER
®DX3 User Manual
Chapter 1: Introduction
Communication Features
The DX3 is capable of communicating with the Central computer over a variety of
communication technologies.
Cellular Optional accessory for Central to sub-master
communication.
WiFi “Short range” standard WiFi to Central, sold as an
optional accessory.
Ethernet Standard on all DX3 systems.
Ethernet-to-Radio Sold as an optional stand-alone accessory.
UHF Radio Sold as an optional stand-alone or embedded accessory.
Serial cable Serial communication to Central or Diagnostic PC.
About This Manual
This manual is divided into five sections:
1. A Quick Start tutorial on quickly getting an irrigation program going and other
common irrigation tasks.
2. A Reference section, with every command explained.
3. A Maintenance and Troubleshooting section to help you, the operator, resolve
any problems or questions you might have quickly and effectively.
4. Appendices
A: Specification
B: Flow Meters
C: Current Monitoring
D: Flow Max
5. A and .glossary index
6
RAIN MASTER
®DX3 User Manual
Chapter 1: Introduction
Icons Explained
A note to clarify.
Important
Warning! Risk of electric shock
BUTTON Press the specified button.
Rotate the Control Dial.
Press the Control Dial.
001 The box indicates which field can be changed.
When the value flashes, it is ready to be changed.
n Range 001 - 010
me 00:10
Apply Changes
Adjustable Fields.
to switch between the different fields.
to switch between values in
date, time, and run time fields.
Press the Control Dial to adjust values in this field.
There are typically two values in a field like this.
Change values in this field with the Control Dial.
For numeric fields only.
Change number values with the Control Dial.
Getting Help
Rain Master strives to build safe, durable, and easy to use product. If, however, you
encounter a problem that is not easily resolved with the troubleshooting solutions
offered in "Chapter 12: Troubleshooting" on page 81, please contact an
authorized Rain Master product expert for assistance via phone or email.
U.S./Canada:
Phone: 1-800-777-1477 (7:30 am–4 pm, M–F, PT)
E-mail: irrigationsupport@irritrol.com
option 1
option 2
option 1
option 2
option 3
001
7
RAIN MASTER
®DX3 User Manual
Chapter 2: Overview
Chapter 2: Overview
Because not all irrigation applications are identical, the DX3 controller has been
designed to allow users to establish a wide variety of individual programmable options.
These options include changing global settings, program configurations, station
settings, communication type and sensor shutdown criteria.
The Faceplate
(0) Active Programs
(0) Active Stations
(2) Alerts
SAT: 239-239 WED 5:43:40 PM
A: Power reset
24 (GPM) Expected 0
8
RAIN MASTER
®DX3 User Manual
Chapter 2: Overview
The Buttons
Button Function
Control Dial
Rotate to switch between fields on a screen and change values
within those fields.
Press to enter a desired field and to save the value.
Left, Right, and Back buttons
To navigate screen and menu selections.
A” button
To...
“B” button
To...
Command button
To execute the on-screen command closest to
that particular command button.
All Stop
To stop all current irrigation activity.
Manual
To manually operate the controller.
Dashboard
To return the controller to the “Dashboard” screen.
Review
To review irrigation program settings.
9
RAIN MASTER
®DX3 User Manual
Chapter 2: Overview
The LEDs
The DX3 has three LEDs beneath the main LCD screen. Each LED illuminates for a
specific reason:
Rain Off
(blue)
Illuminated when the Rain Off command is active.
All irrigation activity is suspended when this light is on.
Alert
(red)
Illuminated when a user alert for the operator has been triggered,
such as after a loss of power or loss of pressure.
Alerts must be manually cleared in the Alert submenu.
Irrigation
(green,
blue, no
illumination)
Illuminates when irrigation is actively in operation. green
Illuminates when no valid program is scheduled to irrigate blue
today.
No illumination when a valid program is scheduled to irrigate
today, but is not actively irrigating.
The Screen
The Liquid Crystal Display (LCD) screen on the DX3 controller is 4.4” QVGA
monochrome display screen capable of 320 x 240 pixels.
The main menu
On both sides of the screen are three command buttons for quick and easy execution
of the buttons assigned command.
Setup Reports &
Diagnostics
Program Alerts
Stations Rain Hold
Main Menu WED 5:43:40 PM
10
RAIN MASTER
®DX3 User Manual
Chapter 2: Overview
Menu Navigation
Navigating menus and executing commands in the DX3 is easy with the various
buttons and the Control Dial.
To navigate the typical DX3 screen, we will use the below as an example.
Navigating and Executing
1. to navigate between adjustable fields.
The “active” field will have a black box around it.
2. to enter the “active” field.
3. to adjust the value.
Some fields have preset options like “Custom” vs. “Data Ind”. Other fields are
numeric and are adjusted incrementally.
4. to set desired option.
5. Repeat steps 1 - 4 for all adjustable fields.
Sensor 1 Type FS-B100
Sensor Name ?
K Factor 00109
Offset 0027
Include In Total Flow YES
Connection Type Decoder
Setup Flow Sensors WED 5:43:40 PM
|Sensor 1|Sensor 2 | Sensor 3
Press and
to move between the different
top” screens.
Some fields have
preset options.
Press to switch
between them.
Number fields must be
adjusted by .
11
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
Chapter 3: Quick Start
This chapter is a step-by-step tutorial for rapid and basic controller setup. For the
demonstration, we will set up an irrigation schedule with 2 start times: 6:15am and
8pm daily, 1 cycle at 10 minutes per station.
The Quick Start guide does not address advanced features such as sensors
(Chapter 4), flow (Appendix B), ET, or FLOWMAX (Appendix C).
Before we can program an irrigation schedule, we must enter the date and time.
To get to the Setup screen from the Dashboard, press
the Control dial or any one of the Command buttons .
The Setup Screen
Flow Communication
Learn Flow Current Checks
& Current
Omit by Date Time/Date
Setup WED 5:43:40 PM
|Page 1|Page 2|
12
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
Setting Current Date and Time
1) Setup 2) Time/Date
3) Switch between the 3 time/date fields.
4) Using the navigation techniques from page 14, adjust fields as necessary.
5) Repeat as necessary for the other fields. When done, press
Creating a New Irrigation Schedule
Now that the date and time are set, we can set up the irrigation schedule.
Time Format 24-Hour
Time 5:43PM
Date 02/08/17
Setup Time/Date WED 5:43:40 PM
24-Hour
AM/PM
13
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
Program Start Time
1) Program 2) Program 1
3) Start Times
It is possible to have 12 start times per program.
4) and to adjust the first start time to 6:15am.
5) and to adjust Start Time 2 to 8:00pm.
Press 'A' to clear start times.
Start times set!
6) When done, press .
Start Times Quick Stns
Water Days Program Hold
Run Times OPT IN’s
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
Start Time 1
06:15AM
Start Time 2
08:00PM
Program 1 Start Times
|1-6|7-12|
Start Time 1 art Time 4
--:--AM --:--AM
Start Time 2 art Time 5
--:--AM --:--AM
Start Time 3 art Time 6
--:--AM --:--AM
Program 1 Start Times WED 5:43:40 PM
|1-6|7-12|
14
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
Water Days
1) Water Days
2) Enter Schedule Type field. 3) Change to desired
schedule. I chose .31-DAY
4) Set Schedule Type. 5) to .Alternate
6) Set . Alternate 7) When done, press .
Alternate days are active.
Start Times Quick Stns
Water Days Program Hold
Run Times OPT IN’s
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
Schedule Type: 14-DAY
Sun Mon Tue Wed Thu Fri Sat
Apply: Alternate Reverse All None
Program 1 Watering Days WED 5:43:40 PM
14-DAY
31-DAY
INTERVAL
Schedule Type: 31-DAY
Apply: Alternate Reverse All None
Program 1 Watering Days WED 5:43:40 PM
□ □ □ □ □ □ □1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
Schedule Type: 31-DAY
Apply: Alternate Reverse All None
Program 1 Watering Days WED 5:43:40 PM
□ □ □ □ □ □ □1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
15
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
Station Run Times
1) Run Times
2) Enter Station 1 hours field. Our run time will only be for ten
minutes, so we can switch to the minutes
field.
3) Switch to minutes field. 4) Adjust desired run time in
minutes.
5) Set Station 1 run time. 6) Switch to next Station field.
7) Repeat steps 2-6 for as necessary for as many stations as desired.
Press 'A' to clear run times.
Stations 1 - 6 set with ten minute run-times.
Start Times Quick Stns
Water Days Program Hold
Run Times OPT IN’s
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
Station 1 Station 4
00:00 00:00
Station 2 Station 5
00:00 00:00
Station 3 Station 6
00:00 00:00
Program 1 Run Times WED 5:43:40 PM
|1-6|7-12|13-18|19-24|25-30|>
Station 1 Station 4
00:10 00:10
Station 2 Station 5
00:10 00:10
Station 3 Station 6
00:10 00:10
Program 1 Run Times WED 5:43:40 PM
|1-6|7-12|13-18|19-24|25-30|>
16
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
Program Hold
A storm is coming! Irrigation will not be needed for a few days. Let’s activate a
Program Hold on Program 1.
1) Program 2) Program 1
3) Program Hold
4) Enter field. 5) Change to desired Set Day(s)
days. 4 days to dry out.
6) Set value. 7) When done, press .
Start Times Quick Stns
Water Days Program Hold
Run Times OPT IN’s
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
Hold Duration 04 Day(s)
Cancel Hold
Program 1 Hold WED 5:43:40 PM
17
RAIN MASTER
®DX3 User Manual
Chapter 3: Quick Start
% Adjust
The weather overall is getting cooler.
Let us decrease the overall amount of irrigation for this program.
1) Program 2) Program 1
3) to get to the Page 2 Program 1 Menu screen.
4) % Adjust
5) Enter % Adjust field. 6) Change to desired %.
I reduced to . 50%
7) Set value. 8) When done, press .
Above, we set our run times to ten minutes per station.
A 50% runtime would therefore cut that in half, to five minutes.
Start Times Quick Stns
Water Days Program Hold
Run Times OPT IN’s
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
Erase/Reset % Adjust
Program 1 Menu WED 5:43:40 PM
|Page 1|Page 2|
% Adjust Value 50
Program 1 % Adjust WED 5:43:40 PM
20
RAIN MASTER
®DX3 User Manual
Reference
21
RAIN MASTER
®DX3 User Manual
Chapter 4: Setup
Chapter 4: Setup
This chapter describes every function within the Setup section of the controller.
All step-by-step directions are started from the above Setup screen.
Press or to get to Page 2 and/or 3 of the Setup options.
Second screen of Setup options
Flow Communication
Learn Flow Current Checks
& Current
Omit by Date Time/Date
Setup WED 5:43:40 PM
|Page 1|Page 2|
WED 5:43:40 PM
Firmware Station
Update Count
Master Valves
& Pumps
FLOW MAX Program
Decoder
Setup
|Page 1|Page 2|
22
RAIN MASTER
®DX3 User Manual
Chapter 4: Setup
Flow
Flow Sensors
Flow Sensors can calculate and report the amount of water, in gallons per minute,
travelling through a pipe. For a complete explanation on flow sensors, including basic
instructions on how to install a flow sensor, please see Appendix B: Flow Sensors.
1. Flow
2. Flow Sensors
3. to navigate to field to set. Fields that can be changed are:
Sensor Type, K Factor Offset Include In Total Flow, , and
calculations or not.
Include in Total Flow: If checked No, all flow sensor data will be
ignored for the selected sensor, including any connected satellites in a
FLOWMAX group that utilize sensor 1.
Type: Select from Custom, FS-B100, FS-B125, FS-B150, FS-B200,
FS-B250, FS-B15, FS-10, FS-15, FS-20, FS-30, FS-40, FS-60, FS-150,
FS-200, FS-300, and FS-400.
: The number of pulses generated in a flow meter used to calculate K-factor
volumetric throughput.
: A number used to compensate flow calculations when there is a Offset
change in temperature and/or pressure.
The K-Factor and offset numbers are automatically adjusted for all
available flow sensors except the Custom setting. See Appendix B:
Flow Meters for K-factor and Offset numbers for common flow
meters with their respective ‘K’ and Offset settings.
Connection Type: Set for conventionally-wired flow sensors and Local
Decoder for a 2-wire flow decoder.
Flow Sensors
Flow Options
Setup Flow WED 5:43:40 PM
Sensor 1 Type FS-B100
Sensor Name ?
K Factor 00109
Offset 0027
Include In Total Flow YES
Connection Type Decoder
Setup Flow Sensors WED 5:43:40 PM
|Sensor 1|Sensor 2 | Sensor 3
23
RAIN MASTER
®DX3 User Manual
Chapter 4: Setup
4. to enter that field.
5. to switch between options.
6. to set desired option.
Press or to the next sensor.
Flow Options
Flow Options establishes flow limits to aid in the detection of possible flow problems.
1. Flow Options
Monthly Limit 9999999
Main Line Limit 0500
Unscheduled Limit 0000
Flow Check Delay (m) 2
Setup Flow Options WED 5:43:40 PM
|Limits|Monitoring|
24
RAIN MASTER
®DX3 User Manual
Chapter 4: Setup
Limits
The number, in total gallons, that the irrigation system should Monthly Limit:
not exceed per month. If it does, the DX3 controller will either generate an
alert (and keep watering) or simply stop watering until a new month begins.
Watering can also be resumed by increasing the monthly limit.
The number, in gallons per minute, the flow of the main line Main Line Limit:
shall not exceed. If the calculated flow ever does exceed this number, an alert
will be triggered condemning all irrigation until cleared. The number should be
set to a value than the flow if all simultaneous stations (six) are “on” but higher
lower than if there is a main line break.
Unscheduled Limit: During periods of no programmed irrigation activity
or no manually activated irrigation, the flow in a system should be zero. The
Unscheduled Limit number, then, is the number in gallons per minute set to
trip an alert if flow is detected during these times of inactivity, condemning all
automatic irrigation until cleared.
Unscheduled flow conditions may be due to broken water lines, defective valves,
faulty solenoids, and/or more.
Flow Check Delay: When a valve is activated, the initial flow rate may be
significantly higher than the valves “steady” state. This could be due to drainage
of water lines, waiting for pump water, or other. The initial high flow rate could
therefore trigger many unwanted and premature alerts. This Flow Check Delay
delays the calculation of flow for a period of two to nine minutes to allow the
flow to stabilize.
To set this number accurately, observe which station takes the longest time for
its GPM rate to stabilize. Round this time period to the next minute and use
that rounded value as the Flow Check Delay value
Press or to get to “Monitoring” Flow Options.

Produktspecifikationer

Varumärke: Irritrol
Kategori: Kontroller
Modell: DX3-SPED08
Färg på produkten: Roestvrijstaal
Inbyggd display: Nee
Bredd: 170 mm
Djup: 145 mm
Höjd: 230 mm
Sladdlängd: 0.75 m
Snäll: Koffie/espresso
Husmaterial: Roestvrijstaal
Tillgångar: 365 W
Kaffeinmatningstyp: Gemalen koffie
Kapacitet i koppar: 6 kopjes
Att göra espresso: Ja
AC-ingångsspänning: 230 V
Typ produkt: Elektrische Moka Express

Behöver du hjälp?

Om du behöver hjälp med Irritrol DX3-SPED08 ställ en fråga nedan och andra användare kommer att svara dig




Kontroller Irritrol Manualer

Kontroller Manualer

Nyaste Kontroller Manualer