Janome 419S Bruksanvisning
Läs nedan 📖 manual på svenska för Janome 419S (34 sidor) i kategorin Symaskin. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/34
Models 419S & 423S
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the followings:
Read all instructions before using this appliance.
DANGER –To reduce the risk of electric shock:
1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the
electric outlet immediately after using and before cleaning.
2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 15 Watts.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.
2. Use this appliance only for its intended use as described in this manual.
Use only attachments recommended by the manufacturer as contained in this manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water.
Return this sewing machine to the nearest authorized dealers or service center for examination, repair,
electrical or mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine
and foot control free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch this sewing machine off ("O") when making any adjustment in the needle area, such as threading the
needle, changing the needle, threading the bobbin or changing the presser foot, and the like.
15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when
making any other adjustments mentioned in this manual.
SAVE THESE INSTRUCTIONS
1
TABLE OF CONTENTS
SECTION 1. ESSENTIAL PARTS
Name of Parts .................................................................................................................................... 2
SECTION 2. GETTING READY TO SEW
Extension Table ................................................................................................................................. 3
Standard Accessories ........................................................................................................................ 3
Accessory Storage Box ..................................................................................................................... 3
Connecting the Machine to the Power Supply ................................................................................... 4
Foot Control ....................................................................................................................................... 4
Presser Foot Lifter ............................................................................................................................. 5
To Attach and Remove the Presser Foot .......................................................................................... 5
Presser Foot Pressure Adjusting Dial ................................................................................................ 5
Changing Needle ............................................................................................................................... 6
To check the needle ...................................................................................................................... 6
Thread and Needle Chart .................................................................................................................. 6
Setting Spool Pins ............................................................................................................................. 7
Removing or Inserting the Bobbin Case ............................................................................................ 7
Winding the Bobbin ............................................................................................................................ 8
Threading Bobbin Case ..................................................................................................................... 8
Threading the Machine ...................................................................................................................... 9
Needle Threader ................................................................................................................................ 10
Drawing Up Bobbin Thread ............................................................................................................... 10
Balancing Needle Thread Tension .................................................................................................... 11
Pattern Selector Dial .......................................................................................................................... 12
Stitch Length Control ......................................................................................................................... 12
Stitch Width Control ........................................................................................................................... 12
Reverse Stitch Button ........................................................................................................................ 13
Dropping the Feed Dog ..................................................................................................................... 13
SECTION 3. BASIC SEWING
Straight Stitch Sewing ........................................................................................................................ 14
To Change Sewing Direction ............................................................................................................. 14
Seam Guides Line ............................................................................................................................. 15
Variable Needle Position ................................................................................................................... 15
Zigzag Stitching ................................................................................................................................. 16
SECTION 4. UTILITY STITCHING
Overcasting ........................................................................................................................................ 16
Tricot Stitch ........................................................................................................................................ 17
Knit Stitch ........................................................................................................................................... 17
Straight Stretch Stitch ........................................................................................................................ 18
Sewing on Buttons ............................................................................................................................. 19
Buttonhole .......................................................................................................................................... 20–21
To adjust buttonhole stitch density ................................................................................................. 21
Corded Buttonhole ............................................................................................................................. 22
Zipper Application .............................................................................................................................. 23
Blind Stitch Hemming ........................................................................................................................ 24
Rolled Hem ........................................................................................................................................ 25
SECTION 5. DECORATIVE STITCHING
Shell Tuck .......................................................................................................................................... 26
Stretch Stitch Patterns ....................................................................................................................... 26
Smocking ........................................................................................................................................... 27
Box Stitching ...................................................................................................................................... 27
Applique ............................................................................................................................................. 28
Decorative Satin Stitch Patterns ........................................................................................................ 28
SECTION 6. CARE OF YOUR MACHINE
Dismantling and Assembling Hook Race Unit ................................................................................... 29
Cleaning the Feed Dog ...................................................................................................................... 29
Oiling the Machine ............................................................................................................................. 30
Oiling behind the face plate ............................................................................................................ 30
Oiling the shuttle hook area ............................................................................................................ 30
Sewing Light ...................................................................................................................................... 30
Troubleshooting ................................................................................................................................. 31
Produktspecifikationer
Varumärke: | Janome |
Kategori: | Symaskin |
Modell: | 419S |
Behöver du hjälp?
Om du behöver hjälp med Janome 419S ställ en fråga nedan och andra användare kommer att svara dig
Symaskin Janome Manualer
21 Oktober 2024
8 Oktober 2024
5 Oktober 2024
30 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
19 September 2024
18 September 2024
Symaskin Manualer
- Symaskin AEG
- Symaskin IKEA
- Symaskin Medion
- Symaskin Siemens
- Symaskin Ambiano
- Symaskin Alfa
- Symaskin Brother
- Symaskin Silvercrest
- Symaskin Livoo
- Symaskin Bestron
- Symaskin Sinbo
- Symaskin Jata
- Symaskin Singer
- Symaskin Bernina
- Symaskin Pfaff
- Symaskin Juki
- Symaskin Solac
- Symaskin Elna
- Symaskin Jocca
- Symaskin Easymaxx
- Symaskin Toyota
- Symaskin Husqvarna
- Symaskin Bernette
- Symaskin Necchi
- Symaskin Yamato
- Symaskin Durkopp Adler
- Symaskin Kayser
- Symaskin RCE
- Symaskin Privileg
- Symaskin Lifetec
- Symaskin Veritas
- Symaskin Union Special
- Symaskin Carina
- Symaskin Vendomatic
- Symaskin Baby Lock
- Symaskin Empisal
- Symaskin Crofton
- Symaskin Lewenstein
- Symaskin Meister Craft
- Symaskin Yamata
- Symaskin Weasy
- Symaskin Łucznik
- Symaskin Silver
- Symaskin Victoria
- Symaskin Prince
- Symaskin Kohler
- Symaskin Muller
- Symaskin Sinojo
- Symaskin Huskystar
- Symaskin Gritzner
- Symaskin LERAN
- Symaskin W6
- Symaskin Prixton
- Symaskin Zippy
- Symaskin Feiyue
- Symaskin Mediashop
- Symaskin Novamatic
- Symaskin Siemssen
- Symaskin Mio Star
- Symaskin Husqvarna-Viking
- Symaskin SteamMax
Nyaste Symaskin Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
26 Oktober 2024
24 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024