Janome 5024 Excel II Decor Bruksanvisning

Janome Symaskin 5024 Excel II Decor

Läs nedan 📖 manual på svenska för Janome 5024 Excel II Decor (41 sidor) i kategorin Symaskin. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/41

INSTRUCTION BOOK

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the

followings:

Read all instructions before using this appliance.

DANGER— To reduce the risk of electric shock:

1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine

from the electric outlet immediately after using and before cleaning.

2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 15 Watts.

WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or

near children.

2. Use this appliance only for its intended use as described in this owner’s manual.

Use only attachments recommended by the manufacturer as contained in this owner’s manual.

3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it

has been dropped or damaged, or dropped into water.

Return this sewing machine to the nearest authorized dealers or service center for examination,

repair, electrical or mechanical adjustment.

4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing

machine and foot controller free from accumulation of lint, dust and loose cloth.

5. Never drop or insert any object into any opening.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

8. To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the sewing machine

needle.

11. Always use the proper needle plate. The wrong plate can cause the needle to break.

12. Do not use bent needles.

13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

14. Switch this sewing machine off (“0”) when making any adjustment in the needle area, such as

threading the needle, changing the needle, threading the bobbin or changing the presser foot, and

the like.

15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or

when making any other adjustments mentioned in this owner’s manual.

SAVE THESE INSTRUCTIONS

Table of Contents

Names of Parts ....................................................2

Detachable Extension Table.................................3

Accessory Storage Compartment ........................4

Connecting Machine to Power Supply .................5

Foot Control .........................................................5

Sewing Light.........................................................6

• To replace the light bulb ................................6

Pressure Dial........................................................6

To Raise or Drop the Feed Dog ...........................6

To Remove and Attach Presser Foot ...................7

To Remove and Attach the Foot Holder ...............7

Reverse Button ....................................................7

Presser Foot Lifter................................................7

Changing Needle .................................................8

Choose Your Needle and Thread.........................8

Winding the Bobbin ..............................................9

• Set the Spool.................................................9

• Removing the Bobbin....................................9

• Winding the Bobbin .....................................10

• Inserting the Bobbin .................................... 11

Threading the Machine ......................................12

• Needle Threader .........................................13

• Drawing Up the Bobbin Thread...................14

Adjust the Top Thread Tension...........................15

• Choose the Correct Tension........................15

• Tension is too tight.......................................15

• Tension is too loose.....................................15

Pattern Selector Dial ..........................................16

Zigzag Width Control..........................................16

Stitch Length Control..........................................16

Infinite Needle Position ......................................16

Straight Stitching ................................................17

• Starting to Sew............................................17

• Changing Sewing Direction.........................17

• Finishing Sewing .........................................17

Sewing on Heavy Fabrics ..................................18

Seam Allowance Lines .......................................18

Turn a Square Corner ........................................18

Zigzag Stitching..................................................19

Overcasting ........................................................19

Overedge Stitch .................................................20

Tricot Stitch ........................................................20

Triple Strength Stitch..........................................21

Outline Stretch Stitch .........................................21

Sewing Buttons ..................................................22

Automatic Buttonhole ...................................23–25

• To Alter the Stitch Density ...........................25

Corded Buttonhole .............................................26

Zipper Sewing ..............................................27–28

• To Snap On the Zipper Foot ........................27

• Fabric Preparation.......................................27

• To Sew...................................................27–28

Rolled Hem ........................................................29

Blind Stitch Hemming.........................................30

Decorative Satin Stitch Patterns ........................31

Stretch Stitch Patterns .......................................31

Adjusting Stretch Stitch Balance ........................32

Smocking ...........................................................32

Quilting ...............................................................33

Pin Tucking.........................................................33

Shell Tuck...........................................................34

Fagoting .............................................................34

Appliqué .............................................................35

Patch Work.........................................................35

Scallop Hems .....................................................36

Elastic Stitch.......................................................36

Care of Your Machine.........................................37

• Cleaning the Hook Race and

Feed Dog ....................................................37

• Replacing the Bobbin Holder ......................37

Troubleshooting ...........................................38–39

Produktspecifikationer

Varumärke:	Janome
Kategori:	Symaskin
Modell:	5024 Excel II Decor
Färg på produkten:	Zwart
Snäll:	Console-zender & ontvanger
Användarmanual:	Ja
Husmaterial:	Aluminium
LED-indikatorer:	Ja
Anslutning för nätadapter:	Ja
RS-232 port:	2
Antal RJ-45-portar:	2
Maximal-räckvidd:	2000 m
Drifttemperatur (TT):	-40 - 85 °C
Kabeltyper som stöds:	Cat5e, Cat6