Janome Memory Craft 4900QC Bruksanvisning
Läs nedan 📖 manual på svenska för Janome Memory Craft 4900QC (89 sidor) i kategorin Symaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/89

WARNING – To reduce the risk of burns, fire, electric shock or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children.
2. Use this appliance only for its intended use as described in this instruction book.
Use only attachments recommended by the manufacturer as contained in this instruction book.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water.
Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or
mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot
controller free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10.Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11.Always use the proper needle plate. The wrong plate can cause the needle to break.
12.Do not use bent needles.
13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14.Switch this sewing machine off (“O”) when making any adjustment in the needle area, such as threading the needle,
changing the needle, threading the bobbin, changing the presser foot, and the like.
15.Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when making any
other adjustments mentioned in this instruction book.
SAVE THESE INSTRUCTIONS
Designs and specifications are subject to change without prior notice.
DANGER – To reduce the risk of electric shock:
1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning.
2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 12 V, 5 Watts.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the following:
Read all instructions before using this appliance.
1
NAME OF PARTS
Name of parts ................................................................. 3
Standard Accessories ..................................................... 4
Extension Table ............................................................... 5
Detaching the table ......................................................... 5
Attaching the table .......................................................... 5
GETTING READY TO SEW
Connecting the Power Supply ......................................... 6
To use start/stop button...................................................6
To use foot control ........................................................... 6
Speed control slider ........................................................ 7
Foot control ..................................................................... 7
FUNCTION BUTTONS
Start/stop button.............................................................. 8
Reverse stitch button.......................................................8
Auto-lock button .............................................................. 8
Up/down needle position button ...................................... 8
Screen brightness adjustment dial .................................. 9
Mode key.........................................................................9
Monogramming key......................................................... 9
Stock/Call key..................................................................9
Twin needle key............................................................... 9
Elongation key.................................................................9
Turnover memory key...................................................... 9
Edit key ........................................................................... 9
Help key .......................................................................... 9
Stitch width adjustment key........................................... 10
Stitch length adjustment key ......................................... 10
Function touchpad.........................................................10
Clear key ....................................................................... 10
Memory key................................................................... 10
Mode selection .............................................................. 11
Pattern selection ........................................................... 12
CUSTOMIZING MACHINE SETTINGS
Resumption setting ....................................................... 13
Sound setting ................................................................ 13
Language setting...........................................................13
Window duration time setting ........................................ 13
To drop or raise the feed dog ........................................ 14
Pressure dial ................................................................. 14
Presser foot lifter ........................................................... 14
Changing presser foot................................................... 15
To remove and attach the foot holder............................ 15
Knee lifter ...................................................................... 15
Changing needle ........................................................... 16
Thread and Needle Chart ............................................. 17
Bobbin Winding ....................................................... 18–19
Inserting the bobbin ...................................................... 20
Threading the machine ................................................. 21
Built-in needle threader ................................................. 22
Drawing up bobbin thread ............................................. 23
Balancing thread tension...............................................24
BASIC STITCHES (MODE 1)
Straight stitch ................................................................ 25
Changing sewing direction ............................................ 25
Securing a seam ........................................................... 25
Using the seam guides on the needle plate .................. 26
Turning a square corner ................................................ 26
Using the quilting guide................................................. 26
Sewing on heavy fabric ................................................. 26
Help button.................................................................... 27
Adjusting the needle drop position ................................ 28
Adjusting the stitch length ............................................. 28
To customize the preset value for the stitch length and
width.............................................................................. 29
Restoring the original setting ........................................ 29
Basting .......................................................................... 30
Lock-a-Matic stitch ........................................................ 31
Triple stretch stitch ........................................................ 31
Stretch stitch ................................................................. 31
Locking stitch ................................................................ 32
Saddle stitch.................................................................. 32
New sculpture stitch ...................................................... 32
Decorative stitch............................................................ 33
French knot ................................................................... 33
Zigzag stitch .................................................................. 34
Types of Overcasting Stitches................................. 35–36
Overcasting with zigzag stitch....................................... 35
Multiple zigzag stitch (Tricot stitch)................................ 35
Overcasting stitch.......................................................... 35
Knit stitch.......................................................................36
Double overedge stitch..................................................36
Overlock stitch............................................................... 36
Button sewing................................................................ 37
Variations of Buttonholes ..............................................38
Square buttonhole....................................................39-41
Double layer buttonhole ................................................ 42
Corded buttonhole.........................................................42
Adjusting buttonhole width ............................................ 43
Adjusting stitch density.................................................. 43
Round-end buttonholes (#18) ....................................... 44
Keyhole buttonholes (#20) ............................................ 44
Adjusting buttonhole width on stitch pattern #18 .......... 44
Adjusting buttonhole width on stitch pattern #20 .......... 44
Knit buttonhole (#24)..................................................... 45
Faux chain buttonhole (#25).......................................... 45
Welted buttonhole ...................................................46–48
Eyelet ............................................................................ 49
Zipper sewing..........................................................50–52
Darning ................................................................... 53–54
Tacking .......................................................................... 55
Blind hem ...................................................................... 56
DECORATIVE STITCHES
Pintucking...................................................................... 57
Quilting .......................................................................... 57
Shell tuck....................................................................... 58
Applique ........................................................................ 58
Smocking ...................................................................... 59
Fagoting ........................................................................ 59
Scallop (A)..................................................................... 60
Scallop (B)..................................................................... 60
Patchwork ..................................................................... 61
Satin stitch..................................................................... 61
Rolled hem .................................................................... 62
Cording.......................................................................... 62
Cross stitch ................................................................... 63
Decorative stitch............................................................ 63
Twin needle sewing ....................................................... 64
TABLE OF CONTENTS
Produktspecifikationer
Varumärke: | Janome |
Kategori: | Symaskin |
Modell: | Memory Craft 4900QC |
Färg på produkten: | Wit |
Vikt: | 900 g |
Bredd: | 132 mm |
Djup: | 260 mm |
Höjd: | 132 mm |
Snäll: | IP-beveiligingscamera |
Husmaterial: | Polyester |
Kraftkälla: | Power over Ethernet (PoE) |
Internationell säkerhetskod (IP): | IP66 |
LED-indikatorer: | Ja |
Vormfaktor: | Rond |
Autofokus: | Ja |
Placeringsstöd: | Buiten |
Anslutningsteknik: | Bedraad |
Ethernet LAN: | Ja |
Monteringsmetod: | Plafond/muur |
Videolägen som stöds: | 1080p |
Maximal upplösning: | 1920 x 1080 Pixels |
Totalt antal megapixlar: | - MP |
Videokomprimeringsformat: | H.264, M-JPEG, MPEG4 |
Typ av strömkälla: | Power over Ethernet (PoE) |
Minimal belysning: | 0 Lux |
Integrerad minneskortläsare: | Ja |
Kompatibla minneskort: | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
Inbyggd hårddisk: | Nee |
Nattseende: | Ja |
LED-typ: | IR |
Video rörelsedetektering: | Ja |
HTTPS-kryptering: | Ja |
Zoomkapacitet: | Ja |
Antal Ethernet LAN (RJ-45)-portar: | 1 |
Brännvidd: | 3 - 10.5 mm |
Strömförbrukning (max): | 11 W |
Full HD: | Ja |
Optisk sensorstorlek: | 1/2.8 " |
Bildsensortyp: | CMOS |
Optisk zoom: | 3.5 x |
Kamerans slutartid: | 1/66500 - 2 s |
Gränssnitt: | RJ-45 |
Internminne: | 512 MB |
vitbalans: | Auto |
Password bescherming: | Gebruiker |
Grafikupplösningar som stöds: | 160 x 90, 1920 x 1080 (HD 1080) |
Inkluderad programvara: | AXIS Camera Companion, AXIS Camera Station |
Kabelteknik: | 10/100Base-T(X) |
Nätverksstandard: | IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
Säkerhetsalgoritmer som stöds: | 802.1x RADIUS, HTTPS, SSH, SSL/TLS |
Stöder Windows: | Ja |
Förvaringstemperatur: | -40 - 65 °C |
USB-anslutning: | Nee |
Nätverksprotokoll som stöds: | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP TM , SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
Webbaserad hantering: | Ja |
Fjärrstyrd: | Ja |
IP-adressfilter: | Ja |
Progressiv skanning: | Ja |
Snabbinstallationsguide: | Ja |
Flashminne: | 256 MB |
Ethernet-gränssnittstyp: | Fast Ethernet |
Språk som stöds: | CHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, KAZ, POR, RUS |
Quality of Service (QoS): | Ja |
Power over Ethernet (PoE): | Ja |
Scherpstellen: | 1.4 |
PTZ-kontroll: | Ja |
Dag/nattläge: | Ja |
Monteringsfästen ingår: | Ja |
Rörelsesensor: | Ja |
Night vision scope: | 30 m |
Larmingång/utgång: | Ja |
Antal språk: | 10 |
Wide Dynamic Range (WDR): | Ja |
Wifi: | Nee |
Strömförbrukning (typiskt): | 4.6 W |
Drifttemperatur (TT): | -30 - 60 °C |
Relativ luftfuktighet i drift (VV): | 10 - 100 procent |
Mask privat zon: | Ja |
Linsens betraktningsvinkel, horisontell: | 95 ° |
Typ av varningsmeddelande: | |
Linsens betraktningsvinkel, vertikal: | 51 ° |
Automatisk spårning: | Ja |
Textoverlay: | Ja |
Iris: | Ja |
Terminalblockport: | Ja |
Behöver du hjälp?
Om du behöver hjälp med Janome Memory Craft 4900QC ställ en fråga nedan och andra användare kommer att svara dig
Symaskin Janome Manualer

5 Mars 2025

25 Februari 2025

25 Februari 2025

25 Februari 2025

25 Februari 2025

21 Oktober 2024

8 Oktober 2024

5 Oktober 2024

30 September 2024

21 September 2024
Symaskin Manualer
- Symaskin AEG
- Symaskin IKEA
- Symaskin Medion
- Symaskin Siemens
- Symaskin Ambiano
- Symaskin Alfa
- Symaskin Brother
- Symaskin Silvercrest
- Symaskin Tristar
- Symaskin Livoo
- Symaskin Bestron
- Symaskin Sinbo
- Symaskin Jata
- Symaskin Emerio
- Symaskin Singer
- Symaskin Bernina
- Symaskin Pfaff
- Symaskin Juki
- Symaskin Solac
- Symaskin Elna
- Symaskin Termozeta
- Symaskin Jocca
- Symaskin Kenmore
- Symaskin Guzzanti
- Symaskin Easymaxx
- Symaskin Toyota
- Symaskin Husqvarna
- Symaskin Bernette
- Symaskin Necchi
- Symaskin Yamato
- Symaskin Durkopp Adler
- Symaskin Kayser
- Symaskin RCE
- Symaskin Privileg
- Symaskin Lifetec
- Symaskin Kunft
- Symaskin Veritas
- Symaskin Union Special
- Symaskin Easy Home
- Symaskin Carina
- Symaskin Lervia
- Symaskin Vendomatic
- Symaskin Home Electric
- Symaskin Baby Lock
- Symaskin Empisal
- Symaskin Crofton
- Symaskin Lewenstein
- Symaskin Durabase
- Symaskin Meister Craft
- Symaskin Micromaxx
- Symaskin Yamata
- Symaskin Weasy
- Symaskin Łucznik
- Symaskin Silver
- Symaskin Victoria
- Symaskin Prince
- Symaskin Hofmann
- Symaskin Kohler
- Symaskin Muller
- Symaskin Sinojo
- Symaskin Huskystar
- Symaskin Gritzner
- Symaskin LERAN
- Symaskin W6
- Symaskin Prixton
- Symaskin Primera
- Symaskin Zippy
- Symaskin Feiyue
- Symaskin Mediashop
- Symaskin ER
- Symaskin Novamatic
- Symaskin Siemssen
- Symaskin Mio Star
- Symaskin Husqvarna-Viking
- Symaskin SteamMax
Nyaste Symaskin Manualer

11 Februari 2025

5 Februari 2025

5 Februari 2025

14 Januari 2025

14 Januari 2025

8 Januari 2025

8 Januari 2025

8 Januari 2025

8 Januari 2025

7 Januari 2025