JBL CBT1000E Bruksanvisning

JBL högtalare CBT1000E

Läs nedan 📖 manual på svenska för JBL CBT1000E (28 sidor) i kategorin högtalare. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/28

CBT1000 and CBT1000E

Bracket Installation Guide

Rev C

CBT1000 CBT1000E

Hardware Included with CBT1000:

Tools Required:

M6 Hex Wrench

#2 Phillips Head Screwdriver

Note: When setting system for UP tilting, the UPPER and LOWER

parts get reversed on the cabinet -- see instructions.

M6 x 115 mm

PAN HEADS

WALL

BRACKETS

SPEAKER

BRACKETS

ARM

LINK

SWIVEL

BRACKETS

←

M6 x 125 mm

PAN HEADS

M6 x 20 mm

SOCKET HEADS

M8 x 20 mm

PAN HEADS M6

FLAT WASHERS

M6 SPLIT

LOCK WASHERS

M6 RUBBER

WASHERS

FLAT WASHERS

M8 SPLIT

LOCK WASHERS

CAP NUTS

4 Bracket Parts for UPPER

Mounting Position on

Cabinet (when set for 0° or

for down-tilting)

3 Bracket Parts for LOWER

Mounting Position on

Cabinet (when set for 0° or

for down-tilting)

←

Hardware Included with CBT1000E:

Tools Required:

#2 Phillips Head Screwdriver

M8 x 20 mm PAN HEADS

M8 FLAT WASHERS

M8 SPLIT LOCK WASHERS

Instructions for CBT 1000 Alone (without 1000E):

The BRACKET ASSEMBLY consists of 2 pieces of (the parts that mount on the SPEAKER BRACKETS

speaker), 2 pieces of WALL BRACKETS SWIVEL BRACKETS (the parts that mount on the wall), 2 pcs of

(which get added to the if utilized for horizontal swivel/pan aiming capability), and an SPEAKER BRACKETS

ARM LINK (which is utilized for the larger tilt angles).

1) RUN WIRING -- Run the wiring from the power amplier to the location desired for mounting the JBL

CBT Loudspeakers. Note: Connect wire to speaker terminals at a point in the installation process when

convenient for your installation circumstances.

2) ATTACHING WALL BRACKET TO WALL -- WALL BRACKET Using a level to ensure that the is straight,

secure the WALL BRACKET to the wall. Be sure to use the appropriate wall anchors for attaching the

bracket. Use as many of the screw holes as possible for maximum integrity and safety.

CAUTION: Installation must be done by

qualied persons using safe rigging standards.

The installer is responsible for proper selection and use of

mounting hardware to properly and safely wall-mount the

speakers.

Hardware attaching WALL BRACKET to wall is not included.

Utilize proper hardware for particular wall structure.

Spacing needed between upper and lower

WALL BRACKET parts with CBT1000 depends on

whether speaker will be set with down-tilt or up-tilt.

Spacing:

181 mm (7-1/8”) for Down-Tilt

197 mm (7-3/4”) for Up-Tilt

(Drawings show upper

and lower bracket

orientation as set for

down-tilt or 0°. Wall

brackets to be reversed

in location and ipped for

up-tilt applications (see

further instructions).

Produktspecifikationer

Varumärke:	JBL
Kategori:	högtalare
Modell:	CBT1000E
Snäll:	Draadloos
Gränssnitt:	ADSL over an analogue line and an ISDN connection.
Anslutningar:	4 UTP ports, 10/100 Mbps \n1 WAN Port\n
Kompatibla operativsystem:	Supports: Windows 98SE, ME, NT, 2000, XP and Mac\n
Nätverksfunktioner:	Standard IEEE 802.3. 10Base-T, 100Base-TX
Modemhastighet:	8000 Kbit/s
Uppströms datahastighet:	2 Mbit/s
Nedströms datahastighet:	8 Mbit/s
Dataöverföringshastigheter som stöds:	up to 54 Mbps
Protokoll som stöds:	NAT firewall, there is no Internet access to the private IP addresses \nIP Packet Access Control, error checking during data transmission \nDoS Hacker Attack protection \nPAP/CHAP/MS-CHAP authentications
Datalänksprotokoll:	Wireless 802.11g protocol